发现模拟汇聚的路由器,使用ip default-gateway而不是ip route 0.0.0.0 0.0.0.0的时候,模拟核心的路由器无法ping通汇聚,使用指定源ping的话可以,反之汇聚倒是可以 ip route 0.0.0.0 0.0.0.0是启用了路由,ip default-gateway是没启用,但是毕竟路由器和交换机从机理上还是有区别的。 按照要求配置了3560G和2960S,当然2层的2960只能配ip default-gateway,的确是可以完全通信,没有任何问题,看来交换机和路由器的机制真的不一样。
Entering configuration mode [edit] #set deviceconfig system ip-address 192.168.1.58 netmask 255.255.255.0 default-gateway committed successfully > show system info hostname: PA-VM ip-address: 192.168.1.58 netmask: 255.255.255.0 default-gateway
192.168.1.1 -----> ip route 目的网段 掩码 下一跳IP地址(要把数据包发给下一个的地址) 二层交换机配置: Ruijie(config)#ip default-gateway config)#end Ruijie#write -----> 确认配置正确,保存配置 四、验证命令 二层交换机配置验证 Ruijie#show ip redirects default-gateway
IP地址:switch(config)#interface vlan 1 ;进入vlan 1switch(config-if)#ip address ;设置IP地址switch(config)#ip default-gateway
编辑 | 排版 | 制图 | 测试 | ©瑞哥 此文用时1小时03分钟,原创不易,坚持更不易,希望我的每一份劳动成果都可以得到大家的一个【好看】 1、ip default-gateway 当路由器上的
config-VLAN 800)#ip address 10.26.166.9 255.255.255.0 // 配置网管 IP 地址,此地址根据实际情况由客响分配 Ruijie(config)#ip default-gateway
53, length 1: Discover Parameter-Request Option 55, length 36: Subnet-Mask, Time-Zone, Default-Gateway Lease-Time Option 51, length 4: 21600 Subnet-Mask Option 1, length 4: 255.255.255.0 Default-Gateway length 4: 192.168.56.230 Parameter-Request Option 55, length 36: Subnet-Mask, Time-Zone, Default-Gateway Lease-Time Option 51, length 4: 21600 Subnet-Mask Option 1, length 4: 255.255.255.0 Default-Gateway
192.168.1.5/24", "fixed-cidr": "192.168.1.5/25", "fixed-cidr-v6": "2001:db8::/64", "mtu": 1500, "default-gateway
255.255.255.0 配置交换机端口ip 和子网掩码 switch (conf-if)#no shut 激活端口 switch (conf-if)#exit switch (conf)#ip default-gateway
172.17.5.4/24", "fixed-cidr": "172.17.5.4/25", "fixed-cidr-v6": "2001:db8::/64", "mtu": 1500, "default-gateway
192.168.1.5/24", "fixed-cidr": "192.168.1.5/25", "fixed-cidr-v6": "2001:db8::/64", "mtu": 1500, "default-gateway
地址: switch(config)#interface vlan 1 进入vlan 1 switch(config-if)#ip address 设置IP地址 switch(config)#ip default-gateway
123456 进入虚拟接口设置密码,没有密码的话无法通过telnet链接 配置网关作用:实现跨网段管理 配置方法 Switch(config)#ip default-gateway
默认false "default-gateway":"", "default-gateway-v6":"", "default-runtime":"runc", "default-ulimits":{}
switchport mode trunk 指定特定一个native vlan (config-if)#switchport trunk native vlan 10 配置网关: switch(config)#ip default-gateway
//(ipv4)子网划分,即限制ip地址分配范围,用以控制容器所属网段实现容器间(同一主机或不同主机间)的网络访问 "fixed-cidr-v6": "",//(ipv6)子网划分 "default-gateway
ip default-gateway 10.1.0.1 interface Ethernet1/1(与 2900 对接) switchport trunk encapsulation dot1q switchport ip default-gateway 10.1.0.1 ! interface Ethernet0/2(与 1900 C 对接) switchport access VLAN 5 no shut !
"base": "172.31.0.0/16", "size": 24 } ], "default-cgroupns-mode": "private", "default-gateway
/查看电脑路由表----show ip route 1.3640路由器模拟PC---关闭路由功能---手动写网关 PC(config)#no ip routing PC(config)#ip default-gateway
conf t ip default-gateway 10.1.1.254 31.关闭自动解析功能: conf t no ip domain-lookup