为"Servo.h“找到了多个库(Teensy 3.6)

Question

我知道已经有类似的问题了，但是给出的建议并没有真正的帮助。我想用我的新的Teensy 3.6控制一个伺服电机。如果我编译我的草图，会出现一个错误：

In file included from C:\Users\Michael\Desktop\servo_test\servo_test.ino:1:0:

C:\Users\Michael\Documents\Arduino\libraries\Servo\src/Servo.h:75:2: error: #error "This library only supports boards with an AVR, SAM, SAMD, NRF52 or STM32F4 processor."

 #error "This library only supports boards with an AVR, SAM, SAMD, NRF52 or STM32F4 processor."

  ^

Multiple libraries were found for "Servo.h"
 Used: C:\Users\Michael\Documents\Arduino\libraries\Servo
 Not used: C:\Program Files (x86)\Arduino\libraries\Servo
 Not used: C:\Program Files (x86)\Arduino\hardware\teensy\avr\libraries\Servo
Error compiling for board Teensy 3.6.

我的代码：

#include <Servo.h>
void setup() {
}
void loop() {
}

如果我把板子换成Arduino UNO，编译过程就能正常工作，没有任何错误：

Sketch uses 888 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 46 bytes (2%) of dynamic memory, leaving 2002 bytes for local variables. Maximum is 2048 bytes

提前感谢您的回答

Answer 1

“您似乎手动安装了Servo库。您尝试过删除它吗？”

对我很管用。再次感谢！