在esp32上使用DallasTemperature和Wifi.h时出现上师冥想错误

Question

当我尝试在我的esp32上使用Wifi + DallasTemperature && OneWire时，我得到了这个错误。温度传感器是重力DS18B20。

当我不使用Wifi时，它工作得很好。

这是一个错误代码

09:41:17.049 -> Guru Meditation Error: Core  1 panic'ed (LoadProhibited). Exception was unhandled.
09:41:17.082 -> 
09:41:17.082 -> Core  1 register dump:
09:41:17.082 -> PC      : 0x400d3b40  PS      : 0x00060433  A0      : 0x800d4488  A1      : 0x3ffb2710  
09:41:17.082 -> A2      : 0x3f40af28  A3      : 0x0000001c  A4      : 0x0a4c4c55  A5      : 0x3ff49000  
09:41:17.082 -> A6      : 0x00000020  A7      : 0x00000000  A8      : 0x800d3b15  A9      : 0x3ffb26d0  
09:41:17.082 -> A10     : 0x00060420  A11     : 0x3ffc2cac  A12     : 0x3ffc2ca4  A13     : 0xb33fffff  
09:41:17.082 -> A14     : 0x00000001  A15     : 0x00000001  SAR     : 0x00000020  EXCCAUSE: 0x0000001c  
09:41:17.115 -> EXCVADDR: 0x0a4c4c55  LBEG    : 0x400df328  LEND    : 0x400df332  LCOUNT  : 0x00000000  
09:41:17.115 -> 
09:41:17.115 -> 
09:41:17.115 -> Backtrace:0x400d3b3d:0x3ffb27100x400d4485:0x3ffb2750 0x400d476c:0x3ffb2780 0x400d2782:0x3ffb27b0 0x400d53b7:0x3ffb2820 

在这里我把它解码了

Decoding 5 results
0x400d3b3d: OneWire::reset() at /home/suomi/Arduino/libraries/OneWire/util/OneWire_direct_gpio.h line 165
:  (inlined by) OneWire::reset() at /home/suomi/Arduino/libraries/OneWire/OneWire.cpp line 172
0x400d4485: OneWire::search(unsigned char*, bool) at /home/suomi/Arduino/libraries/OneWire/OneWire.cpp line 388
0x400d476c: DallasTemperature::begin() at /home/suomi/Arduino/libraries/DallasTemperature/DallasTemperature.cpp line 113
0x400d2782: setup() at /home/suomi/Arduino/sketch_sep18a/sketch_sep18a.ino line 53
0x400d53b7: loopTask(void*) at /home/suomi/.arduino15/packages/esp32/hardware/esp32/2.0.0/cores/esp32/main.cpp line 38

在上面提到的文件中也使用回溯的行

1. ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[pin].mux);

2. DIRECT_MODE_INPUT(reg, mask);

3.if (!reset()) {

4.while (_wire->search(deviceAddress)) {

5.sensors.begin();

6.void loopTask(void *pvParameters)
{
    setup();

和我的执行代码

#include <OneWire.h>
#include <DallasTemperature.h>
#include <WiFi.h>


// Wifi Settings
#define WIFI_NETWORK "name"
#define WIFI_PASSWORD "pass"
#define WIFI_TIMOUT_MS 20000

const int oneWireBus = 32;
OneWire oneWire(oneWireBus);
DallasTemperature sensors(&oneWire);
int status;



int connectToWiFi() {
    Serial.println(" ");
    Serial.print("Connencting to WiFi");
    Serial.print(" ");
    WiFi.mode(WIFI_STA);
    WiFi.begin(WIFI_NETWORK, WIFI_PASSWORD);

    unsigned long startAttemptTime = millis();

    while(WiFi.status() != WL_CONNECTED && millis() - startAttemptTime < WIFI_TIMOUT_MS) {
        Serial.print(".");
        delay(700);
    }

    if (WiFi.status() != WL_CONNECTED) {
        Serial.println("Failed connect to WiFi!");
        return 0;

    }

    else {
        Serial.print("Connected to WiFi");
        Serial.println(WIFI_NETWORK);
        Serial.println(WiFi.localIP());
        return 1;
    }
}


void setup() {
    status = connectToWiFi();
    Serial.begin(115200);
    sensors.begin();


void loop() {
        
}

我的c++不是很好，有人能帮我吗？LoadProhibited：看起来它试图访问一个它不应该访问的内存？

Answer 1

我已经很久没有在ESP32上使用Arduino库了。也许应该在connectToWifi()之前调用Serial.begin()，因为您在初始化它之前调用了Serial方法。