我正在尝试使用PN532从手机(三星Galaxy S10)读取我的NFC UID,但我只收到08和另外3位随机值。我读到以08开头的值是RID(随机ID)。有没有可能只读取一个唯一的值,或使用PN532读取一些独特的东西,从我的手机近场通信?我想使用该值将其与代码中的常量进行比较,并将脉冲发送到继电器以打开门。这段代码来自da Adafruit_PN532库。
#include <Wire.h>
#include <SPI.h>
#include <Adafruit_PN532.h>
#define PN532_IRQ (2)
#define PN532_RESET (3) // Not connected by default on the NFC Shield
// Or use this line for a breakout or shield with an I2C connection:
Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);
void setup(void) {
Serial.begin(115200);
Serial.println("Hello!");
nfc.begin();
uint32_t versiondata = nfc.getFirmwareVersion();
if (! versiondata) {
Serial.print("Didn't find PN53x board");
while (1); // halt
}
Serial.print("Found chip PN5"); Serial.println((versiondata >> 24) & 0xFF, HEX);
Serial.print("Firmware ver. "); Serial.print((versiondata >> 16) & 0xFF, DEC);
Serial.print('.'); Serial.println((versiondata >> 8) & 0xFF, DEC);
// configure board to read RFID tags
nfc.SAMConfig();
Serial.println("Waiting for an ISO14443A Card ...");
}
void loop(void) {
uint8_t success;
uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID
uint8_t uidLength; // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
// Wait for an ISO14443A type cards (Mifare, etc.). When one is found
// 'uid' will be populated with the UID, and uidLength will indicate
// if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);
if (success) {
// Display some basic information about the card
Serial.println("Found an ISO14443A card");
Serial.print(" UID Length: "); Serial.print(uidLength, DEC); Serial.println(" bytes");
Serial.print(" UID Value: ");
nfc.PrintHex(uid, uidLength);
if (uidLength == 4) {
// We probably have a Mifare Classic card ...
uint32_t cardid = uid[0];
cardid <<= 8;
cardid |= uid[1];
cardid <<= 8;
cardid |= uid[2];
cardid <<= 8;
cardid |= uid[3];
Serial.print("Seems to be a Mifare Classic card #");
Serial.println(cardid);
}
delay(2000);
}
}发布于 2021-04-18 14:23:55
不要将NFC UID用于任何安全目的,因为您可以看到,出于隐私目的,电话确实会随机提供一个。
当多个不同的标签在范围内时,NFC UID仅用于帮助读取硬件处理将数据发送到正确的卡。不能保证UID实际上是唯一的,也不能保证它不能被复制(即使标签是在工厂编程的,你也可以从中国购买克隆,在那里它们可以由最终用户编程)。
如果使用电话来提供唯一性,则最好对存储在标签或模拟标签上的数据使用加密方法,以便将标签用于任何具有安全含义的内容。
https://stackoverflow.com/questions/67144046
复制相似问题