我无法在IBM Watson IOT中订阅ESP8266-ESP32

Question

我想在IBM Watson IOT上订阅ESP8266的"iot-2/evt/status/fmt/json“主题。连接已建立，但正在再次断开连接。因此，将MQTT客户端重新连接到…并订阅iot-2 / cmd /+/ fmt /+ OK。这个循环还在继续。为什么连接断开了？

我的ESP8266代码如下。

我使用了ESP8266-12E NodeMCU，我为发行商创建了一个Android应用程序。

/*
 Basic ESP8266 MQTT example

 This sketch demonstrates the capabilities of the pubsub library in combination
 with the ESP8266 board/library.

 It connects to an MQTT server then:
  - publishes "hello world" to the topic "outTopic" every two seconds
  - subscribes to the topic "inTopic", printing out any messages
    it receives. NB - it assumes the received payloads are strings not binary
  - If the first character of the topic "inTopic" is an 1, switch ON the ESP Led,
    else switch it off

 It will reconnect to the server if the connection is lost using a blocking
 reconnect function. See the 'mqtt_reconnect_nonblocking' example for how to
 achieve the same result without blocking the main loop.

 To install the ESP8266 board, (using Arduino 1.6.4+):
  - Add the following 3rd party board manager under "File -> Preferences -> Additional Boards Manager URLs":
       http://arduino.esp8266.com/stable/package_esp8266com_index.json
  - Open the "Tools -> Board -> Board Manager" and click install for the ESP8266"
  - Select your ESP8266 in "Tools -> Board"

*/

#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
//#include <ESP8266HTTPClient.h>

#include <SPI.h>
#include <ArduinoJson.h>
#include <PubSubClient.h>

// Update these with values suitable for your network.
//ZYxel
#define ssid  "......."
#define password  ".................."

//GES ARGE
#define ssid2     "..............."      // WiFi SSID
#define password2  "............."  // WiFi password

#define spi_ss_pin SS

#define ORG "............"
#define DEVICE_TYPE "........."
#define DEVICE_ID "..........."
#define TOKEN "................"
//-------- Customise the above values --------
char server[] = ORG ".messaging.internetofthings.ibmcloud.com";
int mqttPort=1883;
const char topic[] = "iot-2/cmd/status/fmt/json"; //"iot-2/cmd/status/fmt/json";

char authMethod[] = "use-token-auth";
char token[] = TOKEN;
char clientId[] = "d:" ORG ":" DEVICE_TYPE ":" DEVICE_ID;

WiFiClient wifiClient;
void callback(char* topic, byte* payload, unsigned int payloadLength) ;
PubSubClient client(server, 1883, callback, wifiClient);

void setup() {
  Serial.begin(115200);
  Serial.println();
  wifiConnect();
  mqttConnect();
}

void loop() {
  if (!client.loop()) {
    mqttConnect();
  }
}

void wifiConnect() {
  Serial.print("Connecting to "); Serial.print(ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.print("nWiFi connected, IP address: "); Serial.println(WiFi.localIP());
}

void mqttConnect() {
  if (!client.connected()) {
    Serial.print("Reconnecting MQTT client to "); Serial.println(server);
    while (!client.connect(clientId, authMethod, token)) {
      Serial.print(".");
      delay(500);
    }
    initManagedDevice();
    Serial.println();
  }
}

void initManagedDevice() {
  if (client.subscribe(topic)) {
    Serial.println("subscribe to cmd OK");
  } else {
    Serial.println("subscribe to cmd FAILED");
  }
}

void callback(char* topic, byte* payload, unsigned int payloadLength) {
  Serial.print("callback invoked for topic: "); Serial.println(topic);

  for (int i = 0; i < payloadLength; i++) {
    Serial.print((char)payload[i]);
  }
}