如何测试我的SSD是否有问题？

Question

所以几周前，我更新到17.10，几乎同时更新到Android 3，这可能是一个错误，因为现在我不知道问题出在哪里。

基本上，似乎磁盘IO变得非常糟糕。一开始我注意到我在交换，所以我把我的公羊翻了一番(现在32次了)，我再也不交换了。但是，当磁盘IO发生时，机器仍然会结冰。结冰，我的意思是，它会变得非常慢，到了我可以打字的地步，几秒钟内我就看不出我在输入什么，当这种情况发生时，我经常会得到一个键的长串。

当我提交我的代码时，Android将对代码进行分析，而UI在此过程中就会冻结。只需要几秒钟。这些问题在更新这两件事之前都不会发生。

另外，当云站备份运行到我的NAS时，它会变得异常缓慢。

我有一个Samsung SSD 850 PRO 512GB SSD。

那么，我能跑什么来看看问题出在哪里呢？

谢谢。

编辑：

Smartctl输出：

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-16-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 850 PRO 512GB
Serial Number:    S250NSAG809789J
LU WWN Device Id: 5 002538 8a0af305f
Firmware Version: EXM02B6Q
User Capacity:    512,110,190,592 bytes [512 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Nov 28 16:22:20 2017 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        (    0) seconds.
Offline data collection
capabilities:            (0x53) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 272) minutes.
SCT capabilities:          (0x003d) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       23126
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       75
177 Wear_Leveling_Count     0x0013   098   098   000    Pre-fail  Always       -       117
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   070   057   000    Old_age   Always       -       30
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       34
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       37060089586

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

df -i输出：

Filesystem              Inodes   IUsed    IFree IUse% Mounted on
udev                   4096227     613  4095614    1% /dev
tmpfs                  4111096    1024  4110072    1% /run
/dev/sda1             29908992 4301747 25607245   15% /
tmpfs                  4111096     524  4110572    1% /dev/shm
tmpfs                  4111096       5  4111091    1% /run/lock
tmpfs                  4111096      18  4111078    1% /sys/fs/cgroup
tmpfs                  4111096      17  4111079    1% /run/user/122
tmpfs                  4111096     458  4110638    1% /run/user/1000
/home/mydir/.Private 29908992 4301747 25607245   15% /home/mydir

Answer 1

安装Gnome磁盘实用程序和检查测试的磨损水平计数和智能数据或任何类似的。

报告的百分比越高，SSD穿得越多，这意味着你更容易遇到问题。

安装时使用：

apt-get install gnome-disk-utility

通过命令行发射

sudo palimpsest

或者通过名称磁盘实用程序下的“应用程序”菜单。

Answer 2

智能规范化数据计数下降，而不是上升！

您可能需要的特定命令是：

sudo smartctl -a /dev/sda | grep Media_Wearout_Indicator

这越高，你就越有可能遇到问题。顺便说一句，我建议您考虑在此之后更换您的驱动器：

• 50% -任务关键驱动器(出于超出此处范围的原因，无论如何都需要访问这些驱动器)。
• 30% -你的/home驱动器(你的电影/音乐/个人档案，你关心的东西在手边)
• 其他的20% (驱动器只提供在线备份，然后才提交到冷库，保存OSes的驱动器只偶尔使用等等)。

Answer 3

根据您的日志输出，您从未在驱动器上运行过智能测试。有几种方法你可以做到这一点。一种方法是通过GUI，如我在回答这里。中所描述的

另一种方法是通过命令行发出命令，如答案这里所述

任何测试的结果都会添加到日志中，如下面命令sudo smartctl -a /dev/sda的输出片段所示：

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     14965         -
# 2  Short offline       Completed without error       00%      1955         -
# 3  Short offline       Completed without error       00%       701         -