Technotrend CT2 4650不适用于新安装

Question

我有一个Technotrend CT2 4650。它在Ubuntu16.04.02上运行得很好，据我所知，这是对以前LTS行的升级。USB模块采用dvb_usb_dvbsky。

然后我的SSD崩溃了，前几天我重新安装了16.04.02。它已经被发现了。当然，它在lsusb中显示，但是模块似乎没有初始化它：

Bus 001 Device 003: ID 0b48:3015 TechnoTrend AG 

当我对dvb_usb_dvbsky进行调制时，它出现在dmesg中：

[  175.468458] usbcore: registered new interface driver dvb_usb_dvbsky

我已经在运行OpenSuSE的PC上测试了模块，下面的内容出现在dmesg中：

[220841.422482] usb 1-2: new high-speed USB device number 9 using xhci_hcd
[220841.563158] usb 1-2: New USB device found, idVendor=0b48, idProduct=3015
[220841.563161] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[220841.563162] usb 1-2: Product: TechnoTrend USB2.0
[220841.563163] usb 1-2: Manufacturer: CityCom GmbH
[220841.563164] usb 1-2: SerialNumber: 20151107
[220843.006483] usb 1-2: dvb_usb_v2: found a 'TechnoTrend TT-connect CT2-4650 CI v1.1' in warm state
[220843.006543] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[220843.006557] DVB: registering new adapter (TechnoTrend TT-connect CT2-4650 CI v1.1)
[220843.007850] usb 1-2: dvb_usb_v2: MAC address: bc:ea:2b:65:04:ab
[220843.020459] i2c i2c-8: Added multiplexed i2c bus 9
[220843.020462] si2168 8-0064: Silicon Labs Si2168-B40 successfully identified
[220843.020463] si2168 8-0064: firmware version: B 4.0.2
[220843.023511] si2157 9-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[220843.030075] sp2 8-0040: CIMaX SP2 successfully attached
[220843.030085] usb 1-2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[220843.058431] Registered IR keymap rc-tt-1500
[220843.058529] input: TechnoTrend TT-connect CT2-4650 CI v1.1 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc0/input25
[220843.058616] rc rc0: TechnoTrend TT-connect CT2-4650 CI v1.1 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc0
[220843.058619] usb 1-2: dvb_usb_v2: schedule remote query interval to 300 msecs
[220843.058621] usb 1-2: dvb_usb_v2: 'TechnoTrend TT-connect CT2-4650 CI v1.1' successfully initialized and connected
[220843.058647] usbcore: registered new interface driver dvb_usb_dvbsky
[220849.365260] dvb_ca adapter 0: DVB CAM detected and initialised successfully

据我所知，这或多或少也是在以前的Ubuntu安装上出现的-我尤其记得看到了CAM的初始化.

我试过手动修改所需的模块，但没有结果。

当我将USB电缆插入设备并加载相关模块时，dmesg中会出现这样的情况：

[ 3285.678512] usb 1-1.1: new high-speed USB device number 6 using ehci-pci
[ 3285.776059] usb 1-1.1: New USB device found, idVendor=0b48, idProduct=3015
[ 3285.776065] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3285.776070] usb 1-1.1: Product: TechnoTrend USB2.0
[ 3285.776073] usb 1-1.1: Manufacturer: CityCom GmbH
[ 3285.776076] usb 1-1.1: SerialNumber: 20151107

与OpenSuSE (以及以前的Ubuntu )相比，它并不多。

任何指示都欢迎。

Answer 1

升级到4.8个固定的东西。原来4.4.0内核太旧了。