Cisco 5506-X -内部到外部流量

Question

我无法在我的一个内部港口的交通路线外。我相信我有正确的NAT、路由和对象配置。其目标是使网络流量可以从外部在内部接口上访问。我能够从外部接口中选择外部地址，但是我不能从任何内部接口中这样做。下面是进一步信息的配置文件。

ASA Version 9.7(1)4 
!
hostname *****
enable password ***** pbkdf2
names

!
interface GigabitEthernet1/1
 nameif outside
 security-level 0
 ip address 23.120.179.137 255.255.255.248 
!
interface GigabitEthernet1/2
 nameif inside
 security-level 100
 ip address 192.168.1.1 255.255.255.0 
!
interface GigabitEthernet1/3
 shutdown
 no nameif    
 no security-level
 no ip address
!
interface GigabitEthernet1/4
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet1/5
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet1/6
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet1/7
 shutdown
 no nameif    
 no security-level
 no ip address
!
interface GigabitEthernet1/8
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Management1/1
 management-only
 no nameif
 no security-level
 no ip address
!
ftp mode passive
object network obj_any
 subnet 0.0.0.0 0.0.0.0
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
arp rate-limit 16384
!
object network obj_any
 nat (any,outside) dynamic interface
!
nat (inside,outside) after-auto source dynamic any interface
route outside 0.0.0.0 0.0.0.0 23.120.179.142 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 sctp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
timeout conn-holddown 0:00:15
timeout igp stale-route 0:01:10
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
service sw-reset-button
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
no ssh stricthostkeycheck
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0

dhcpd auto_config outside
!
dhcpd address 192.168.1.5-192.168.1.254 inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
dynamic-access-policy-record DfltAccessPolicy
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters   
  message-length maximum client auto
  message-length maximum 512
  no tcp-inspection
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny  
  inspect sunrpc 
  inspect xdmcp 
  inspect sip  
  inspect netbios 
  inspect tftp 
  inspect ip-options 
!
service-policy global_policy global
prompt hostname context 
no call-home reporting anonymous
Cryptochecksum:******
: end

Answer 1

你可能只需要为icmp增加检查。

策略映射global_policy 类inspection_default检查icmp 检查icmp错误