在Kubuntu 16.04设置MTS MBLAZE

Question

我有kubuntu16.04，我正在尝试设置我的MTS Mblaze移动宽带。

当我插入usb设备时，没有任何类型的通知。但是lsusb正在检测这个设备

Bus 001 Device 004: ID 19d2:fff5 ZTE WCDMA Technologies MSM 

而dmesg的输出是：

121.915983] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[  122.046011] usb 1-3: New USB device found, idVendor=19d2, idProduct=fff5
[  122.046015] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[  122.046016] usb 1-3: Product: ZTE CDMA Tech
[  122.046017] usb 1-3: Manufacturer: ZTE, Incorporated
[  122.046019] usb 1-3: SerialNumber: 80a0c53d0000
[  122.201009] usb-storage 1-3:1.0: USB Mass Storage device detected
[  122.201080] scsi host3: usb-storage 1-3:1.0
[  122.201148] usbcore: registered new interface driver usb-storage
[  122.206857] usbcore: registered new interface driver uas
[  123.203151] scsi 3:0:0:0: CD-ROM            ZTE      USB Storage FFFE 2.31 PQ: 0 ANSI: 2
[  123.203502] scsi 3:0:0:1: Direct-Access     ZTE      USB Storage FFFE 2.31 PQ: 0 ANSI: 2
[  123.206633] sr 3:0:0:0: [sr0] scsi-1 drive
[  123.206636] cdrom: Uniform CD-ROM driver Revision: 3.20
[  123.206817] sr 3:0:0:0: Attached scsi CD-ROM sr0
[  123.206889] sr 3:0:0:0: Attached scsi generic sg1 type 5
[  123.207095] sd 3:0:0:1: Attached scsi generic sg2 type 0
[  123.210825] sd 3:0:0:1: [sdb] Attached SCSI removable disk

现在我尝试添加一个新的移动宽带连接，并给出所有正确的设置，包括用户名密码。

现在我保存连接，断开连接，重新插入设备，然后单击网络图标，看不到任何移动宽带连接。

我不知道，是否应该有一个启用移动宽带设置什么的，但我不知道现在该做什么。

任何帮助都将不胜感激。

编辑:

我试着使用usb_modeswitch，这就是我得到的：

can't use storage command in MessageContent with interface 0;
   interface class is 255, expected 8. Abort

这就引起了我的调制解调器已经被设置为调制解调器模式的悬念。

但在我的网络管理器中，我仍然看不到任何移动宽带连接。在我有ubuntu的时候，gnome网络管理器中没有叫做的选项

编辑2:我删除并插入了我的dongle几次，然后lsusb给出了一些不同的内容：

Bus 001 Device 008: ID 19d2:fff5 ZTE WCDMA Technologies MSM

您可以看到Product已从fffe更改为fff5。

现在，我使用以下配置文件运行了usb_modeswitch：

DefaultVendor=0x19d2;
DefaultProduct=0xfff5;
MessageContent="55534243123456780000000000000011062000000100000000000000000000"

产出如下：

Read config file: /etc/usb_modeswitch.d/19d2:fff5.conf

* usb_modeswitch: handle USB devices with multiple modes
* Version 2.2.5 (C) Josua Dietze 2015
* Based on libusb1/libusbx

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor=  0x19d2
DefaultProduct= 0xfff5
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0

InquireDevice=1

Look for default devices ...
found USB ID 1d6b:0003
found USB ID 04f2:b50c
found USB ID 8087:07dc
found USB ID 19d2:fff5
vendor ID matched
product ID matched
found USB ID 1d6b:0002
Found devices in default mode (1)
Access device 008 on bus 001
Current configuration number is 1
Use interface number 0
Use endpoints 0x01 (out) and 0x81 (in)
Inquire device details; driver will be detached ...
Looking for active driver ...
No active driver found. Detached before or never attached

SCSI inquiry data (for identification)
-------------------------
Vendor String: ZTE     
Model String: USB Storage FFFE
Revision String: 2.31
-------------------------

USB description data (for identification)
-------------------------
Manufacturer: ZTE, Incorporated
    Product: ZTE CDMA Tech
Serial No.: 80a0c53d0000
-------------------------
Set up interface 0
Use endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Reset response endpoint 0x81
Reset message endpoint 0x01
-> Run lsusb to note any changes. Bye!

即使在这之后，我的网络管理器中也没有新的连接。

编辑3:

当产品id为fffe时，mmcli -L给出：

Found 1 modems:
    /org/freedesktop/ModemManager1/Modem/0 [ZTEMT INCORPORATED] AC2792

mmcli -m 0给出：

/org/freedesktop/ModemManager1/Modem/0 (device id 'bda7d8378866c892ed4c1eed78be4aec3c993c16')
-------------------------
Hardware |   manufacturer: 'ZTEMT INCORPORATED'
        |          model: 'AC2792'
        |       revision: 'AC2792YU8AD511'
        |      supported: 'cdma-evdo'
        |        current: 'cdma-evdo'
        |   equipment id: '80A0C53D'
-------------------------
System   |         device: '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3'
        |        drivers: 'option1'
        |         plugin: 'ZTE'
        |   primary port: 'ttyUSB0'
        |          ports: 'ttyUSB0 (at), ttyUSB1 (at), ttyUSB3 (qcdm)'
-------------------------
Numbers  |           own : '8645921832'
-------------------------
Status   |           lock: 'none'
        | unlock retries: 'unknown'
        |          state: 'enabled'
        |    power state: 'on'
        |    access tech: 'unknown'
        | signal quality: '0' (cached)
-------------------------
Modes    |      supported: 'allowed: 2g; preferred: none
        |                  allowed: 3g; preferred: none
        |                  allowed: 2g, 3g; preferred: none
        |                  allowed: 2g, 3g; preferred: 2g
        |                  allowed: 2g, 3g; preferred: 3g'
        |        current: 'allowed: any; preferred: none'
-------------------------
Bands    |      supported: 'unknown'
        |        current: 'unknown'
-------------------------
IP       |      supported: 'ipv4'
-------------------------
CDMA     |           meid: 'unknown'
        |            esn: '80A0C53D'
        |            sid: 'unknown'
        |            nid: 'unknown'
        |   registration: CDMA1x 'unknown'
        |                 EV-DO  'unknown'
        |     activation: 'unknown'
-------------------------
SIM      |           path: 'none'

-------------------------
Bearers  |          paths: 'none'

-u NetworkManager给出了：

May 15 22:13:32 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330612.9359] (ttyUSB0): modem state changed, 'disabled' --> 'enabling' (reason: user preference)
May 15 22:13:32 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330612.9366] manager: (ttyUSB0): new Broadband device (/org/freedesktop/NetworkManager/Devices/3)
May 15 22:13:32 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330612.9368] device (ttyUSB0): state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
May 15 22:13:32 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330612.9370] device (ttyUSB0): modem state 'enabling'
May 15 22:13:32 vikash-HP-ENVY-Notebook NetworkManager[800]: <warn>  [1463330612.9371] (ttyUSB0): failed to retrieve SIM object: No SIM object available
May 15 22:13:33 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330613.1179] (ttyUSB0): modem state changed, 'enabling' --> 'enabled' (reason: user-requested)
May 15 22:14:28 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330668.2189] WWAN hardware radio set disabled
May 15 22:14:28 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330668.2191] (ttyUSB0): modem state changed, 'enabled' --> 'disabling' (reason: user preference)
May 15 22:14:28 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330668.2192] audit: op="radio-control" arg="wwan-enabled:0" pid=1243 uid=1000 result="success"
May 15 22:14:28 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330668.2266] (ttyUSB0): modem state changed, 'disabling' --> 'disabled' (reason: user-requested)
May 15 22:14:30 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330670.6392] WWAN hardware radio set enabled
May 15 22:14:30 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330670.6393] (ttyUSB0): modem state changed, 'disabled' --> 'enabling' (reason: user preference)
May 15 22:14:30 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330670.6393] audit: op="radio-control" arg="wwan-enabled:1" pid=1243 uid=1000 result="success"
May 15 22:14:30 vikash-HP-ENVY-Notebook NetworkManager[800]: <info>  [1463330670.7565] (ttyUSB0): modem state changed, 'enabling' --> 'enabled' (reason: user-requested)

但是，如果我移除并重新插入dongle几次产品id更改为fff5和mmcli -L找不到任何调制解调器。

但无论是在哪种情况下，我都不知道如何连接互联网，因为网络管理器中没有显示任何内容。

Answer 1

另一种通过3g调制解调器或dongles连接互联网的好方法是Sakis3G。虽然您需要先安装ppp，但它解决了许多问题。你可以试试这个包裹的运气。