基于ubuntu 14.04的Netgear A6100

Question

我正在尝试使用一个A6100无线USB适配器在我的索尼Vaio笔记本电脑与Ubuntu14.04。预装的无线网卡在安装Ubuntu后失去了来自我的wifi路由器的信号条，所以我买了这个USB无线适配器来解决我的连接问题。

这是lsusb的输出：

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 5986:02d3 Acer, Inc 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 3938:1032  
Bus 003 Device 002: ID 0846:9052 NetGear, Inc. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

这是sudo lshw -c network的输出：

*-network               
   description: Wireless interface
   product: AR9485 Wireless Network Adapter
   vendor: Qualcomm Atheros
   physical id: 0
   bus info: pci@0000:01:00.0
   logical name: wlan0
   version: 01
   serial: 08:ed:b9:b8:88:cb
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
   configuration: broadcast=yes driver=ath9k driverversion=3.16.0-46-generic firmware=N/A ip=192.168.1.11 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
   resources: irq:16 memory:c0600000-c067ffff memory:c0680000-c068ffff
*-network
   description: Ethernet interface
   product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
   vendor: Realtek Semiconductor Co., Ltd.
   physical id: 0
   bus info: pci@0000:03:00.0
   logical name: eth0
   version: 07
   serial: 30:f9:ed:af:9f:a4
   size: 10Mbit/s
   capacity: 1Gbit/s
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
   configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
   resources: irq:43 ioport:2000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff
*-network
   description: Wireless interface
   physical id: 1
   bus info: usb@3:2
   logical name: wlan1
   serial: 6c:b0:ce:22:ed:3a
   capabilities: ethernet physical wireless
   configuration: broadcast=yes driver=rtl8812au driverversion=3.16.0-46-generic firmware=N/A link=no multicast=yes wireless=unassociated

Answer 1

您的设备使用罕见和难以捉摸的驱动器8812 and。请使用临时有线以太网或类似的连接，打开终端并执行以下操作：

sudo apt-get update
sudo apt-get install linux-headers-generic build-essential git
git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
cd ~/rtl8812AU_8821AU_linux
make
sudo make install
sudo modprobe 8812au

你的无线电现在应该能工作了。

当Update安装稍后的linux映像时，重新编译：

cd rtl8812AU_8821AU_linux/
make clean
make
sudo make install
sudo modprobe 8812au

请保留该文件和这些说明的时间。

我们可能需要把内部司机列入黑名单才能不受干扰。请告诉我它的司机来自命令：

 sudo lshw -C network

然后我将编辑这个答案，以提供说明。

Answer 2

除了上面的说明，dkms选项也可以在这个驱动程序中使用。

cd
git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
cd rtl8812AU_8821AU_linux
sudo cp -R . /usr/src/rtl8812AU_8821AU_linux-1.0
sudo dkms add -m rtl8812AU_8821AU_linux -v 1.0
sudo dkms build -m rtl8812AU_8821AU_linux -v 1.0
sudo dkms install -m rtl8812AU_8821AU_linux -v 1.0

这样，您不必每次更新内核时都重新编译驱动程序。

Answer 3

( 16.04

)

这个驱动程序的最新版本在更新的内核4+上工作得更好。WPS LED灯工作和连接是更符合更多的范围，以及。

运行以下命令来安装：

sudo apt-get install linux-headers-$(uname -r) build-essential git gcc-5
git clone https://github.com/diederikdehaas/rtl8812AU.git
make CC=/usr/bin/gcc-5
sudo make install
sudo modprobe 8812au
echo 8812au | sudo tee -a /etc/modules

点击这里获取更多信息