无法在戴尔Perc5i双通道Raid控制器上看到Solaris 10上的所有磁盘

Question

我有一个戴尔PowerEdge 2950运行Solaris 10与8个驱动器。我想把一些硬盘换成新的。我现在的问题是，我只看到其中的一半，而且似乎没有其他4的迹象。

服务器信息-

# cat /etc/release
                    Solaris 10 5/09 s10x_u7wos_08 X86
       Copyright 2009 Sun Microsystems, Inc.  All Rights Reserved.
                    Use is subject to license terms.
                         Assembled 30 March 2009

cfgadm输出-

# cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0                 disk         connected    configured   unknown
c0::dsk/c0t1d0                 disk         connected    configured   unknown
c0::dsk/c0t2d0                 disk         connected    configured   unknown
c0::dsk/c0t3d0                 disk         connected    configured   unknown
usb0/1                         unknown      empty        unconfigured ok
usb0/2                         unknown      empty        unconfigured ok
usb1/1                         unknown      empty        unconfigured ok
usb1/2                         unknown      empty        unconfigured ok
usb2/1                         unknown      empty        unconfigured ok
usb2/2                         unknown      empty        unconfigured ok
usb3/1                         unknown      empty        unconfigured ok
usb3/2                         unknown      empty        unconfigured ok
usb4/1                         unknown      empty        unconfigured ok
usb4/2                         unknown      empty        unconfigured ok
usb4/3                         unknown      empty        unconfigured ok
usb4/4                         unknown      empty        unconfigured ok
usb4/5                         usb-hub      connected    configured   ok
usb4/5.1                       unknown      empty        unconfigured ok
usb4/5.2                       unknown      empty        unconfigured ok
usb4/5.3                       unknown      empty        unconfigured ok
usb4/5.4                       unknown      empty        unconfigured ok
usb4/6                         unknown      empty        unconfigured ok
usb4/7                         unknown      empty        unconfigured ok
usb4/8                         unknown      empty        unconfigured ok

raidctl绝对没有输出

格式输出-

AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <DEFAULT cyl 8841 alt 2 hd 255 sec 63>
          /pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@0,0
       1. c0t1d0 <DELL-PERC 5/i-1.03-67.75GB>
          /pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@1,0
       2. c0t2d0 <DELL-PERC 5/i-1.03-67.75GB>
          /pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@2,0
       3. c0t3d0 <DELL-PERC 5/i-1.03-67.75GB>
          /pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@3,0
Specify disk (enter its number): ^C

Answer 1

您需要从使用MegaCLI或MegaRAID存储管理器(正如)管理RAID控制器开始，这需要适当的驱动程序。Oracle的硬件比较列表为您指明了正确使用驱动程序的方向.

• 甲骨文用于PERC5i的HCL页面

...but链接不好，很可能是因为硬件有多老。然而，快速搜索LSI站点仍然可以找到所需的驱动程序和软件：

• LSI驱动程序下载
• MegaCLI
• 大型存储管理器(Solaris 10存储管理器)

驱动程序安装可能会解决这个问题.如果不是，您将不得不使用MegaCLI挖掘信息来排除故障。而不仅仅是留给您"RTFM"，您还需要阅读一下MegaCLI指南，以找到如何获取相关数据的问题。你可以从一些网络搜索开始。"MegaCLI显示所有磁盘“)，如果指南有点压倒性。

通过评论更新/是否有进展/结果？