关闭vsftpd服务的FTP端口

Question

我使用iptables防火墙打开了端口21，但是当我在服务器上运行nmap时，它显示ftp端口关闭了。我在linux上重新启动了service vsftpd，但没有结果。

下面是vsftpd.conf文件：

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES
pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES

链式输入(策略接受0数据包，0字节) pkts字节目标prot选择退出源目的地49051 24M接受所有-*0.0.0.0/00.0.0.0/0状态相关，建立48 3104接受icmp -** 0.0.0.0/0 0.0.0/0 0 0接受所有- lo *0.0.0/0 0.0.0.0/0 221 12996接受tcp -** 0.0.0.0/0.0.0.0/0状态新tcp dpt:22 88 5188接受tcp -**0.0.0/0状态新tcp dpt:80 28 1424接受tcp -* 0.0.0.0/0 0.0.0.0/0状态新tcp dpt:21 488 25316接受tcp -** 0.0.0.0/0 0.0.0.0/0状态新tcp dpt:443 2 104接受tcp -*0.0.0/0状态新tcp dpt:636 3 156接受tcp -** 0.0.0.0/0状态新tcp dpt:3690 0接受tcp -*0.0.0/0状态新tcp dpt:21 6 304接受tcp -** 0.0.0.0/0 0.0.0.0/0状态新tcp dpt:20 0接受udp -**0.0.0/0状态新udp dpt:21 0接受udp -** 0.0.0.0/0 0.0.0.0/0状态新的udp dpt:20 2576 130 K拒绝所有-** 0.0.0.0/0 0.0.0.0/0拒绝-与icmp-主机-禁止

链式转发(策略接受0数据包，0字节) pkts字节目标prot选择退出源目的地0 0拒绝所有-* 0.0.0.0/0拒绝-与icmp-主机-禁止

链式输出(策略接受47281包，7169 K字节) pkts字节目标prot选择退出源目的地

Answer 1

从系统中运行以下命令，查看是否有任何进程正在使用端口21：

lsof -i:21

如果有进程，并且它们不是您的vsftpd服务，那么您需要关闭它们来释放vsftpd的端口21。

如果有vsftpd的进程，那么您必须沿着网络故障排除路线(检查路由、防火墙等)。

如果没有进程，那么vsftpd就永远不会在该端口上启动，并且存在一个不同的问题。检查日志文件(默认情况下可能是/var/ log /messages )，并考虑尝试在调试模式下启动守护进程。还请注意，端口21被认为是一个特权端口，因此进程需要拥有根特权才能使用它(至少在最初是这样)。

Answer 2

如果适用，请检查端口是否在路由器上打开并转发到您的服务器。