无法通过dongle连接以太网

Question

我想从wifi转移到以太网。我的电脑是联想的Thinkpad碳发电II。这台电脑没有以太网端口。你得靠一根绳子。我仍然拥有和电脑一起运来的那台(看起来像这)。因为随着时间的推移我的车有点损坏了。今天，我在亚马逊上买了一个新的 (一个USBtorj45适配器)。我找不到办法让它起作用。欢迎任何帮助。

hostnamectl结束：

Operating System: Manjaro Linux
Kernel: Linux 4.4.83-1-MANJARO
Architecture: x86-64

ifconfig enp0s25的输出：

enp0s25: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 54:ee:75:96:39:28 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 20 memory 0xf0500000-f0520000

国际人口基金的产出：

00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I218-V (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 6 (rev e4)
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)

lsusb的产出：

Bus 003 Device 003: ID 04ca:7036 Lite-On Technology Corp.
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 006: ID 1058:107c Western Digital Technologies, Inc. Elements Desktop (WDBWLG)
Bus 002 Device 005: ID 0bc2:a0a4 Seagate RSS LLC Backup Plus Desktop Drive
Bus 002 Device 004: ID 0bc2:a0a4 Seagate RSS LLC Backup Plus Desktop Drive
Bus 002 Device 003: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 002 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 8087:07dc Intel Corp.
Bus 001 Device 005: ID 138a:0017 Validity Sensors, Inc. Fingerprint Reader
Bus 001 Device 003: ID 04d9:0169 Holtek Semiconductor, Inc.
Bus 001 Device 009: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Answer 1

以测试连接是否正常：

ifconfig enp0s25 up (这将启用您的网络接口/ dongle)

dhcpcd (这将启动dhcp客户端以获取ip地址)

工作时，您可以转移到一个更永久和更方便的解决方案：

例如，您可以使用netctl来自动连接。你要做的是：

• 在/etc/netctl/my_dhcp_profile中创建一个配置文件，或者如何命名它；您也可以创建多个配置文件。例如: Interface=enp0s25 Connection=ethernet IP=dhcp或(静态IP)：Interface=enp0s25 Connection=ethernet IP=static Address=('10.1.10.2/24') Gateway=('10.1.10.1') DNS=('10.1.10.1')
• 启用配置文件: netctl启用my_dhcp_profile netctl启动my_dhcp_profile

在此之后，它将在可用时自动激活，不需要进一步的交互。start基本上是必需的，以便现在就启动它，而不是在重新启动之后。您还可以使用stop手动停用它。