首页
学习
活动
专区
圈层
工具
发布
社区首页 >问答首页 >已载入电视调谐器卡但无法调音

已载入电视调谐器卡但无法调音
EN

Ask Ubuntu用户
提问于 2013-06-08 02:40:11
回答 1查看 1.9K关注 0票数 1

我在运行Ubuntu12.04.2LTS的HP Proliant N40L微服务器中安装了两个单独的PCI调谐器卡。这两张卡都被成功地识别并注册为DVB-T卡。

尝试使用DVB实用程序(扫描、w_scan)或其他软件(TVHeadend)不返回信号。在dmesg中没有错误消息(见下文)。其中一张卡已经成功地应用在一台插入同一天线电缆的Windows上,所以我确信硬件和信号都很好。

解决此问题的下一步步骤是什么?

代码语言:javascript
复制
[   10.500910] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
[   10.503616] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.0/0000:03:00.0/0000:04:00.2/usb4/4-1/input/input2
[   10.503795] dvb-usb: schedule remote query interval to 287 msecs.
[   10.503802] dvb-usb: USB DVB-T Device successfully initialized and connected.
[   10.503833] dvb-usb: found a 'USB DVB-T Device' in warm state.
[   10.503844] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   10.507107] DVB: registering new adapter (USB DVB-T Device)
[   10.529997] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[   10.765649] RTL2832U check_tuner_type : FC0012 tuner on board...
[   10.875461] cx25840 3-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[   10.907187] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[   10.925702] xc4000 1-0061: creating new instance
[   10.926262] xc4000: Device not found at addr 0x61 (0xffff)
[   10.926366] xc4000 1-0061: destroying instance
[   10.926529] cx23885[0]: registered device video0 [v4l2]
[   10.926620] cx23885[0]: registered device vbi0
[   10.926827] cx23885[0]: registered ALSA audio device
[   10.930850] tuner 1-0061: Tuner has no way to set tv freq
[   10.942820] cx23885_dvb_register() allocating 1 frontend(s)
[   10.942824] cx23885[0]: cx23885 based dvb card
[   10.962568] xc4000 2-0061: creating new instance
[   10.963291] xc4000: Successfully identified at address 0x61
[   10.963293] xc4000: Firmware has not been loaded previously
[   10.971195] DVB: registering new adapter (cx23885[0])
[   10.971203] DVB: registering adapter 2 frontend 0 (Zarlink ZL10353 DVB-T)...
[   10.971857] cx23885_dev_checkrevision() Hardware revision = 0xa4
[   10.971865] cx23885[0]/0: found at 0000:02:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xfe600000
[   11.332565] DVB: registering adapter 1 frontend 0 (Realtek DVB-T RTL2832)...
[   11.334180] input: IR-receiver inside an USB DVB receiver as     /devices/pci0000:00/0000:00:04.0/0000:03:00.0/0000:04:00.2/usb4/4-2/input/input3
[   11.334319] dvb-usb: schedule remote query interval to 287 msecs.
[   11.334324] dvb-usb: USB DVB-T Device successfully initialized and connected.
[   11.334357] dvb-usb: found a 'USB DVB-T Device' in warm state.
[   11.334371] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   11.336039] DVB: registering new adapter (USB DVB-T Device)
[   11.355161] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[   11.596933] RTL2832U check_tuner_type : FC0012 tuner on board...
[   12.163908] DVB: registering adapter 3 frontend 0 (Realtek DVB-T RTL2832)...
[   12.165480] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.0/0000:03:00.0/0000:04:00.2/usb4/4-3/input/input4
[   12.165606] dvb-usb: schedule remote query interval to 287 msecs.
[   12.165613] dvb-usb: USB DVB-T Device successfully initialized and connected.
[   12.165647] dvb-usb: found a 'USB DVB-T Device' in warm state.
[   12.165658] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   12.167379] DVB: registering new adapter (USB DVB-T Device)
[   12.185508] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[   12.425785] RTL2832U check_tuner_type : FC0012 tuner on board...
[   12.995998] DVB: registering adapter 4 frontend 0 (Realtek DVB-T RTL2832)...
[   12.996640] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.0/0000:03:00.0/0000:04:00.2/usb4/4-4/input/input5
[   12.997422] dvb-usb: schedule remote query interval to 287 msecs.
[   12.997428] dvb-usb: USB DVB-T Device successfully initialized and connected.
[   12.997463] usbcore: registered new interface driver dvb_usb_rtl2832u

以下是lspci的输出:

代码语言:javascript
复制
sudo lspci -v -d 14f1:8852
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 03)
Subsystem: LeadTek Research Inc. Device 6f39
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at fe600000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] Power Management version 2
Capabilities: [90] Vital Product Data
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Advanced Error Reporting
Capabilities: [200] Virtual Channel
Kernel driver in use: cx23885
Kernel modules: cx23885
EN

回答 1

Ask Ubuntu用户

发布于 2013-06-08 03:09:54

我有TStick+ (ID 0ccd:00d7)。

品牌/设备驱动程序似乎都不起作用,相反,我不得不使用媒体构建:

LinuxTV >使用最新的实验驱动程序/补丁

(链接提供安装“媒体构建”驱动程序的步骤。)

在lsusb上出现了什么,带着这个设备?

您能否提供以下方面的输出:

lsusb

lsmod | grep dvb

dmesg | grep dvb

票数 0
EN
页面原文内容由Ask Ubuntu提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接:

https://askubuntu.com/questions/305503

复制
相关文章

相似问题

领券
问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档