blocks|key|2332688|text|正如凯尔所说，w32tm+/resync是实现这一目标的现代方式。有关链接到微软知识库(KB+307897)命令的更多信息，请参见此w32tm。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2332689|还有一个net+time，它是一个较旧的版本，但可能更容易。|entityMap|0|LINK|mutability|MUTABLE|url|https://support.microsoft.com/en-us/help/307897/how-to-synchronize-the-time-with-the-windows-time-service-in-windows-x^0|7|D|Z|J|0|0|4|8^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@$9|R|A|S|1|T]]|E|$]]|$1|F|3|G|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]]|H|$I|$5|J|K|L|E|$M|N]]]]

As Kyle said <code>w32tm /resync</code> is the modern way to do this. See this <a href="https://support.microsoft.com/en-us/help/307897/how-to-synchronize-the-time-with-the-windows-time-service-in-windows-x" rel="noreferrer">Link to Microsoft Knowledgebase (KB 307897)</a> for more information on the w32tm command.

There is also <code>net time</code> which is an older version but perhaps easier.

blocks|key|2332921|text|对于那些还在问这个问题的人。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2332922|若要更新，请使用以下命令(2008年和2012年与服务器兼容)+w32tm+/config+/manualpeerlist:"ntp_server“/syncfromflags:manual+/reliable:yes+/update|ordered-list-item|2332923|用源更改ntp_server|2332924|重新启动时间服务网络停止w32time网启动w32time|2332925|重新同步时间w32tm+/resync|2332926|验证同步状态w32tm+/query+/status|2332927|上面的命令应该是好的，如果您的源正确工作和/或您的连接是好的(防火墙或微软前沿也可能是一个问题)。下面的命令可以帮助排除故障。|2332928|列出同行|2332929|w32tm+/query+/peers|code-block|syntax|javascript|2332930|列出NTP的来源：|2332931|w32tm+/query+/source|entityMap^0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|11|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|12|8|@]|9|@]|A|$]]|$1|G|3|H|5|D|7|13|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|14|8|@]|9|@]|A|$]]|$1|K|3|L|5|D|7|15|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|16|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|17|8|@]|9|@]|A|$]]|$1|Q|3|R|5|S|7|18|8|@]|9|@]|A|$T|U]]|$1|V|3|W|5|6|7|19|8|@]|9|@]|A|$]]|$1|X|3|Y|5|S|7|1A|8|@]|9|@]|A|$T|U]]]|Z|$]]

For those that still asking this question.

<ol>
<li>To update, use the command below (2008 and 2012 server compatible)

<pre><code>w32tm /config /manualpeerlist:"ntp_server" /syncfromflags:manual /reliable:yes /update
</code></pre></li>
</ol>

change the ntp_server with your source

<ol start="2">
<li>Restart the time service

<pre><code>net stop w32time
net start w32time
</code></pre></li>
<li>Resync the time

<pre><code>w32tm /resync
</code></pre></li>
<li>Verify your sync status 

<pre><code>w32tm /query /status
</code></pre></li>
</ol>

Commands above should be fine if your sources are working correctly and/or your connection is OK (firewall or Microsoft Forefront can be an issue also). The commands below can help with troubleshooting

To list out peers

<pre><code>w32tm /query /peers
</code></pre>

To list out NTP Sources:

<pre><code>w32tm /query /source
</code></pre>

blocks|key|32759|text|您可以使用以下命令：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|32760|w32tm+/resync|offset|length|style|CODE|entityMap^0|0|0|D^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|J|8|@$D|K|E|L|F|G]]|9|@]|A|$]]]|H|$]]

You can use the following command:

<code>w32tm /resync</code>

blocks|key|32908|text|您可以使用：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|32909|w32tm+/resync|code-block|syntax|javascript|32910|此外，使用w32tm+/resync+/rediscover也将“在重新同步前对网络资源进行重新检测”|offset|length|style|CODE|32911|或使用：|32912|net+time+/set|32913|将提示您将时间设置为DC。(适用于旧版本的Windows)|entityMap|0|LINK|mutability|MUTABLE|url|http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/time_w32tm.mspx?mfr=true^0|0|0|5|P|W|J|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Z|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|10|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|11|8|@$I|12|J|13|K|L]]|9|@$I|14|J|15|1|16]]|A|$]]|$1|M|3|N|5|6|7|17|8|@]|9|@]|A|$]]|$1|O|3|P|5|D|7|18|8|@]|9|@]|A|$E|F]]|$1|Q|3|R|5|6|7|19|8|@]|9|@]|A|$]]]|S|$T|$5|U|V|W|A|$X|Y]]]]

You can use:

<pre><code>w32tm /resync
</code></pre>

Additionally, using <code>w32tm /resync /rediscover</code> will also <a href="http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/time_w32tm.mspx?mfr=true" rel="noreferrer">"force redetection of network resourced before resynchronization."</a>

Or using:

<pre><code>net time /set
</code></pre>

Will prompt you to set the time to the DC. (Works for older versions of Windows)

blocks|key|2333263|text|更改时间服务器|type|unordered-list-item|depth|inlineStyleRanges|entityRanges|data|2333264|w32tm+/config+/manualpeerlist:"0.pool.ntp.org+1.pool.ntp.org"+/syncfromflags:manual+/update|code-block|syntax|javascript|2333265|前更新时间|2333266|w32tm+/resync+/force|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|M|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|N|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|O|8|@]|9|@]|A|$E|F]]]|K|$]]

<ul>
<li>change your time server</li>
</ul>
<pre class="lang-perl prettyprint-override"><code>w32tm /config /manualpeerlist:&quot;0.pool.ntp.org 1.pool.ntp.org&quot; /syncfromflags:manual /update
</code></pre>
<ul>
<li>fore update time</li>
</ul>
<pre class="lang-perl prettyprint-override"><code>w32tm /resync /force
</code></pre>

blocks|key|33010|text|如果配置了ntp服务器，Powershell一个班轮：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|33011|gsv+w32time+%7C+sasv;+w32tm+/resync+/force|offset|length|style|CODE|33012|如果CMOS+batery失败，您可以将此.bat文件放入启动程序，以便在操作系统启动时重新生成：|33013|@powershell+-NoProfile+-Command+'gsv+w32time+%7C+sasv;+w32tm+/resync+/force'|code-block|syntax|javascript|entityMap^0|0|0|14|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Q|8|@$D|R|E|S|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|T|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|U|8|@]|9|@]|A|$M|N]]]|O|$]]

Powershell one liner if ntp server is configured:

<code>gsv w32time | sasv; w32tm /resync /force</code>

You can put this .bat file in the startup if you CMOS batery failed so it can resync upon OS start:

<pre><code>@powershell -NoProfile -Command 'gsv w32time | sasv; w32tm /resync /force'
</code></pre>

blocks|key|2333061|text|操作系统:+MS+Windows+7|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2333062|已经尝试过以上所有的想法，但都没有帮助。最初的问题仍然存在：“由于所需的时间更改太大，计算机没有重新同步。”|header-two|2333063|。|2333064|解决方案可以在注册表中找到:+HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config|2333065|如果当地时间很匆忙(例如，2050年12月31日-2050年)，请改变这一点:+MaxNegPhaseCorrection|unordered-list-item|2333066|如果当地时间延迟(例如，1980年1月1日)：MaxPosPhaseCorrection|2333067|默认值为0xD2F0+(即54000秒)。=+15小时)|2333068|(使用Google获取更多详细信息)|2333069|我使用“开始”菜单中的这个简单的win_clock_sync.bat文件StartUp：|offset|length|style|CODE|2333070|echo+off
echo+Sync+computer+time+from+internet
echo.
echo+Back-up+registry+w32time\Config
reg+export+HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config+exported_w32time.reg+/y
rem+changing+the+registry+keys+temporarly:
reg+add+HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config+/v+MaxNegPhaseCorrection+/d+0xFFFFFFFF+/t+REG_DWORD+/f
reg+add+HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config+/v+MaxPosPhaseCorrection+/d+0xFFFFFFFF+/t+REG_DWORD+/f
echo.
echo+w32tm+/config+/update
w32tm+/config+/update
echo.
echo+w32tm+/resync+/rediscover+
w32tm+/resync+/rediscover+
echo.
echo+Restore+registry+w32time\Config
reg+import+exported_w32time.reg|code-block|syntax|javascript|2333071|享受！:-)|entityMap^0|0|0|0|0|0|0|0|0|G|I|0|0^^$0|@$1|2|3|4|5|6|7|15|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|16|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|17|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|18|8|@]|9|@]|A|$]]|$1|I|3|J|5|K|7|19|8|@]|9|@]|A|$]]|$1|L|3|M|5|K|7|1A|8|@]|9|@]|A|$]]|$1|N|3|O|5|K|7|1B|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|1C|8|@]|9|@]|A|$]]|$1|R|3|S|5|6|7|1D|8|@$T|1E|U|1F|V|W]]|9|@]|A|$]]|$1|X|3|Y|5|Z|7|1G|8|@]|9|@]|A|$10|11]]|$1|12|3|13|5|6|7|1H|8|@]|9|@]|A|$]]]|14|$]]

OS: MS Windows 7

All above ideas have been tried but did not help. The original problem still exists: "The computer did not resync because the required time change was too big."

Solution is found in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config 

<ul>
<li>change this if the local time is in a hurry (e.g. 31-Dec-2050):
MaxNegPhaseCorrection </li>
<li>change this if the local time is delayed (e.g.
1-Jan-1980): MaxPosPhaseCorrection </li>
<li>The default values are 0xD2F0 (i.e. 54000 sec. = 15 hours)</li>
</ul>

(use Google for more details)

I use this simple <code>win_clock_sync.bat</code> file from Start Menu StartUp:

<pre><code>echo off
echo Sync computer time from internet
echo.
echo Back-up registry w32time\Config
reg export HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config exported_w32time.reg /y
rem changing the registry keys temporarly:
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config /v MaxNegPhaseCorrection /d 0xFFFFFFFF /t REG_DWORD /f
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\w32time\Config /v MaxPosPhaseCorrection /d 0xFFFFFFFF /t REG_DWORD /f
echo.
echo w32tm /config /update
w32tm /config /update
echo.
echo w32tm /resync /rediscover 
w32tm /resync /rediscover 
echo.
echo Restore registry w32time\Config
reg import exported_w32time.reg
</code></pre>

Enjoy! :-)

blocks|key|33043|text|net+start+w32time
w32tm+/resync|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|33044|根据暴动小游戏|unstyled|offset|length|entityMap|0|LINK|mutability|MUTABLE|url|https://support.riotgames.com/hc/en-us/articles/202536660-Issues-with-the-League-of-Legends-Store-PvP-Net-#wq1^0|0|0|7|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|Q|8|@]|9|@$G|R|H|S|1|T]]|A|$]]]|I|$J|$5|K|L|M|A|$N|O]]]]

<pre><code>net start w32time
w32tm /resync
</code></pre>

<a href="https://support.riotgames.com/hc/en-us/articles/202536660-Issues-with-the-League-of-Legends-Store-PvP-Net-#wq1" rel="nofollow noreferrer">According to Riot Games</a>

blocks|key|2333227|text|根据我的研究，我把这个书签了起来：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2333228|如果Hyper主机服务器是同一域的一部分，则禁用PDC客户vm的时间同步。|ordered-list-item|2333229|在PDC(或任何单个工作站)上，从引用的内部DNS或ip不可信地址(0x8)更新:+W32tm+/config+/manualpeerlist:"192.168.0.254,0x8“/syncfromflags:manual+/reliable:yes+/update+Powershell重新启动-服务w32time+W32tm+/resync+/nowait|2333230|在dc上不是PDC:+w32tm+/config+/syncfromflags:domhier+/update+W32tm+/resync+/rediscover|2333231|仅用于更新时间的服务器和其他站点，而不是配置:+W32tm+/resync+/nowait|2333232|检查时间是否真的在更新(差异)：w32tm+/stripchart+/computer:192.168.0.254+/samples:15+/dataonly|2333233|如果时间服务中断或失败并需要重置:+Powershell停止服务w32time+W32tm+/unregister超时值30+W32tm+/register+Powershell启动服务w32time|2333234|注意:+NTP端口是123+UDP，在任何健康的计算机上都应该提供相同的输出。|2333235|Powershell+Get-NetUDPEndpoint+-LocalPort+123


LocalAddress+++++++++++++++++++++++++++++LocalPort
------------+++++++++++++++++++++++++++++---------
::+++++++++++++++++++++++++++++++++++++++123
0.0.0.0++++++++++++++++++++++++++++++++++123|code-block|syntax|javascript|2333236|其他命令w32tm+/query+/status+w32tm+/query+/peers+w32tm+/query+/configuration|2333237|ms：时间同步最佳实践的最佳实践|offset|length|entityMap|0|LINK|mutability|MUTABLE|url|https://social.technet.microsoft.com/forums/windowsserver/en-US/043b1ebe-e7bc-40ca-91e0-174a6854808e/time-sync-best-practices^0|0|0|0|0|0|0|0|0|0|0|3|8|0^^$0|@$1|2|3|4|5|6|7|18|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|19|8|@]|9|@]|A|$]]|$1|E|3|F|5|D|7|1A|8|@]|9|@]|A|$]]|$1|G|3|H|5|D|7|1B|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|1C|8|@]|9|@]|A|$]]|$1|K|3|L|5|D|7|1D|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|1E|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|1F|8|@]|9|@]|A|$]]|$1|Q|3|R|5|S|7|1G|8|@]|9|@]|A|$T|U]]|$1|V|3|W|5|6|7|1H|8|@]|9|@]|A|$]]|$1|X|3|Y|5|6|7|1I|8|@]|9|@$Z|1J|10|1K|1|1L]]|A|$]]]|11|$12|$5|13|14|15|A|$16|17]]]]

Based on my research, I bookmarked this:
<ol start="0">
<li>If Hyper-v host server is a part of the same domain, disable time sync for PDC guest vm
</li>
<li>On PDC(or any single workstation), update from quoted internal DNS or ip untrusted address(0x8):
W32tm /config /manualpeerlist:&quot;192.168.0.254,0x8&quot; /syncfromflags:manual /reliable:yes /update
Powershell Restart-Service w32time
W32tm /resync /nowait
</li>
<li>on dc that is not PDC:
w32tm /config /syncfromflags:domhier /update
W32tm /resync /rediscover
</li>
<li>On servers and other stations for update time only, not config:
W32tm /resync /nowait
</li>
<li>Check that time is really updating(difference ):
w32tm /stripchart /computer:192.168.0.254 /samples:15 /dataonly
</li>
<li>if time service broken or failed and need reset:
Powershell Stop-service w32time
W32tm /unregister
Timeout 30
W32tm /register
Powershell Start-service w32time
</li>
</ol>
Note: NTP port is 123 UDP and should give the same output on any healthy computer
<pre><code>Powershell Get-NetUDPEndpoint -LocalPort 123


LocalAddress LocalPort
------------ ---------
:: 123
0.0.0.0 123
</code></pre>
Other commands
w32tm /query /status
w32tm /query /peers
w32tm /query /configuration
Best practice from ms: <a href="https://social.technet.microsoft.com/forums/windowsserver/en-US/043b1ebe-e7bc-40ca-91e0-174a6854808e/time-sync-best-practices" rel="nofollow noreferrer">Time Sync best practices</a>

blocks|key|33170|text|如果主机是Windows+Server+2016+Active+Directory+(ADDC)，几乎所有解决方案(@Akos除外)都无法工作，因为它将自己视为“可靠”的源，无法进行大时间的更改。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|33171|w32tm+/resync+/force无法工作，因为/force没有出现在服务器2016中。|offset|length|style|CODE|33172|net+time+/SET+/Y也不起作用，因为它会要求：|33173|要将本地计算机的时间设置为与\AD.example.net的时间匹配吗？(Y/N)+是|blockquote|33174|当然，如果你在AD.example.net上，它是行不通的，/Y只是隐藏了这个问题。|33175|这些步骤适用于我使用PowerShell：|33176|将w32time服务设置为不可靠的：|ordered-list-item|33177|w32tm+/config+/reliable:no+/syncfromflags:manual+/update|code-block|syntax|javascript|33178|选项/syncfromflags:manual意味着与对等列表(即外部NTP)中列出的NTP同步，/update用于通知配置已更改的时间服务。|33179|重新启动w32time|33180|Stop-Service+w32time
Start-Service+w32time|33181|同步|33182|w32tm+/resync|33183|这应该能行。|33184|如果您确实需要ADDC作为可靠的时间来源，请再次使其可靠：|33185|w32tm+/config+/reliable:yes+/update
Stop-Service+w32time
Start-Service+w32time|entityMap^0|0|0|K|R|6|0|0|G|0|E|F|0|7|E|U|2|0|0|0|0|2|L|1D|7|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1G|8|@$D|1H|E|1I|F|G]|$D|1J|E|1K|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|1L|8|@$D|1M|E|1N|F|G]]|9|@]|A|$]]|$1|J|3|K|5|L|7|1O|8|@$D|1P|E|1Q|F|G]]|9|@]|A|$]]|$1|M|3|N|5|6|7|1R|8|@$D|1S|E|1T|F|G]|$D|1U|E|1V|F|G]]|9|@]|A|$]]|$1|O|3|P|5|6|7|1W|8|@]|9|@]|A|$]]|$1|Q|3|R|5|S|7|1X|8|@]|9|@]|A|$]]|$1|T|3|U|5|V|7|1Y|8|@]|9|@]|A|$W|X]]|$1|Y|3|Z|5|6|7|1Z|8|@$D|20|E|21|F|G]|$D|22|E|23|F|G]]|9|@]|A|$]]|$1|10|3|11|5|S|7|24|8|@]|9|@]|A|$]]|$1|12|3|13|5|V|7|25|8|@]|9|@]|A|$W|X]]|$1|14|3|15|5|S|7|26|8|@]|9|@]|A|$]]|$1|16|3|17|5|V|7|27|8|@]|9|@]|A|$W|X]]|$1|18|3|19|5|6|7|28|8|@]|9|@]|A|$]]|$1|1A|3|1B|5|S|7|29|8|@]|9|@]|A|$]]|$1|1C|3|1D|5|V|7|2A|8|@]|9|@]|A|$W|X]]]|1E|$]]

Almost none of the solutions (except @Akos) work if the host is an Windows Server 2016 Active Directory Domain Controller (ADDC), as it treats itself as a "reliable" source that cannot make big time change.

<code>w32tm /resync /force</code> does not work, because the <code>/force</code> does not appear in server 2016.

<code>net time /SET /Y</code> does not work either, because it would have asked:

<blockquote>
 Do you want to set the local computer's time to match the time at
 <code>\AD.example.net</code>? (Y/N) [Y]
</blockquote>

Of course, it won't work if you are on <code>AD.example.net</code>, <code>/Y</code> just hides the question.

The steps work for me using PowerShell:

<ol>
<li>Set w32time service as unreliable:</li>
</ol>

<pre><code>w32tm /config /reliable:no /syncfromflags:manual /update
</code></pre>

Option <code>/syncfromflags:manual</code> means sync with NTP listed in peer list (i.e. external NTP), <code>/update</code> for notifying the time service the configuration have changed.

<ol start="2">
<li>Restart the w32time</li>
</ol>

<pre><code>Stop-Service w32time
Start-Service w32time
</code></pre>

<ol start="3">
<li>Sync</li>
</ol>

<pre><code>w32tm /resync
</code></pre>

This should work.

<ol start="4">
<li>If you DO need ADDC as a reliable time source, make it reliable again:</li>
</ol>

<pre><code>w32tm /config /reliable:yes /update
Stop-Service w32time
Start-Service w32time
</code></pre>

blocks|key|33219|text|我有一个Win10映像，可以还原到一个快照，在这个快照中，这个错误消息总是可以复制的："The+computer+did+not+resync+because+the+required+time+change+was+too+big."|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|33220|我试图用脚本来解决这个问题，但没有结果：|33221|reg+import+nettime.reg+#+updates+MaxPosPhaseOffset+and+MaxNegPhaseOffset

net+start+w32time
w32tm.exe+/config+/manualpeerlist:"pool.ntp.org",0x8+/syncfromflags:manual+/reliable:no+/update++
w32tm.exe+/query+/configuration
w32tm.exe+/resync+/rediscover
w32tm.exe+/resync+/force|code-block|syntax|javascript|33222|这里指出的/reliable:no、MaxPosPhaseCorrection设置和任何其他命令都不能立即以可复制的方式工作。|33223|在更新注册表、启动服务、更新配置和再次重新启动服务之后，我仍然需要等待许多分钟才能成功w32tm+/resync+/rediscover。|33224|时间同步最终成功，只是没有及时和可靠的方式。|entityMap^0|17|23|0|0|0|5|C|I|L|0|17|P|0^^$0|@$1|2|3|4|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|W|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|X|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|Y|8|@$9|Z|A|10|B|C]|$9|11|A|12|B|C]]|D|@]|E|$]]|$1|O|3|P|5|6|7|13|8|@$9|14|A|15|B|C]]|D|@]|E|$]]|$1|Q|3|R|5|6|7|16|8|@]|D|@]|E|$]]]|S|$]]

I have a Win10 image that I can restore to a snapshot where this error message is always reproducible: <code>"The computer did not resync because the required time change was too big."</code> 

I have tried to script a solution to this problem with no avail:

<pre><code>reg import nettime.reg # updates MaxPosPhaseOffset and MaxNegPhaseOffset

net start w32time
w32tm.exe /config /manualpeerlist:"pool.ntp.org",0x8 /syncfromflags:manual /reliable:no /update 
w32tm.exe /query /configuration
w32tm.exe /resync /rediscover
w32tm.exe /resync /force
</code></pre>

Neither the <code>/reliable:no</code> nor the <code>MaxPosPhaseCorrection</code> settings, nor any other commands indicated here worked immediately in a reproducible way. 

After updating the registry, starting the service, updating the configuration and again restarting the service I still had to wait many minutes before I <code>w32tm /resync /rediscover</code> would succeed.

The time syncronization does succeed eventually, just not in a timely and reliable manner.

blocks|key|33450|text|计算机没有重新同步，因为所需的时间更改太大了。|type|blockquote|depth|inlineStyleRanges|entityRanges|data|33451|powershell>设定日期"02/01/2023+4:20:00下午“|unstyled|33452|检查您的手机或录像机当前的大致时间，如果漂移是%2B/-+5分钟，Windows将是疯狂的，所以您有一些摆动空间。|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|I|8|@]|9|@]|A|$]]|$1|E|3|F|5|D|7|J|8|@]|9|@]|A|$]]]|G|$]]

<blockquote>
The computer did not resync because the required time change was too big.
</blockquote>
powershell&gt; Set-Date &quot;02/01/2023 4:20:00 PM&quot;
Check your phone or VCR for current approximate time, Windows will be mad if the drift is +/- 5 minutes, so you have some wiggle room.

blocks|key|2333093|text|尝试单行命令。一直起作用。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2333094|w32tm+/unregister+&&+w32tm+/register+&&+net+stop+w32time+&&+net+start+w32time+&&+w32tm+/resync|code-block|syntax|javascript|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|I|8|@]|9|@]|A|$E|F]]]|G|$]]

Try one-line command. Works all the time.
<pre><code>w32tm /unregister &amp;&amp; w32tm /register &amp;&amp; net stop w32time &amp;&amp; net start w32time &amp;&amp; w32tm /resync
</code></pre>

What is the command to sync a Windows workstation or server to its configured time source?

How do I force sync the time on Windows Workstation or Server?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云AI代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

功能1上新10个字符

功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符。

功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符。

功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符

功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符

功能4上新

文章&问答评论现已支持表情

全新交互，全新视觉，新增快捷键、悬浮工具栏、高亮块等功能并同时优化现有功能，全面提升创作效率和体验

社区富文本编辑器全新改版！诚邀体验～ 

精选全网热门MCP server，让你的AI更好用 🚀

💥开发者 MCP广场重磅上线！

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

将Windows工作站或服务器与其配置的时间源同步的命令是什么？

问如何在Windows工作站或服务器上强制同步时间？
EN

回答 13

Server Fault用户

Server Fault用户

Server Fault用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在Windows工作站或服务器上强制同步时间？EN

回答 13

Server Fault用户

Server Fault用户

Server Fault用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在Windows工作站或服务器上强制同步时间？
EN