Grub (debian)不会以AHCI模式启动。

Question

我运行我的Debian (宏碁笔记本电脑)相当一段时间，没有太多的麻烦。然而，当我最近启动它时，我收到了这样的消息：

No bootable device - insert boot disk and press any key

它与live (xubuntu)一起工作，硬盘驱动器是可见的(我能够从live中做一些备份)。

在搜索Internet之后，我已经将BIOS AHCI模式转换为IDE模式--它可以工作，但是性能要低得多，有时，当我打开浏览器，复制文件时，我会得到输入/输出错误，需要进行硬重置。

它是被损坏的硬盘，还是更像是系统问题？

也许它会有帮助：

dmesg | grep -iE 'err|warn|fail|fatal'
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    1.142728] ACPI: Using IOAPIC for interrupt routing
[    1.580327] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.810972] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.811037] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.811099] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.811161] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.811222] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.811285] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.811347] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.811409] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.811444] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.027771] ata1.01: failed to resume link (SControl 0)
[    4.035765] ata2.01: failed to resume link (SControl 0)
[   14.020286] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[   14.020299] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   14.020305] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   14.020309] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20140424/utaddress-254)
[   14.020314] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   14.020317] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20140424/utaddress-254)
[   14.068599] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   14.828072] ACPI Warning: SystemIO range 0x0000000000004000-0x000000000000401F conflicts with OpRegion 0x0000000000004000-0x000000000000400F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[   41.539932] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.539995] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540056] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540105] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540138] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540170] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540264] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   41.540298] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   54.063360] WARNING: CPU: 0 PID: 1905 at /build/linux-zbOcpU/linux-3.16.7-ckt25/net/wireless/sme.c:920 cfg80211_connect+0x4aa/0x4f0 [cfg80211]()
[   54.063460]  [<ffffffff810677f7>] ? warn_slowpath_common+0x77/0x90
[   54.070138] WARNING: CPU: 0 PID: 1906 at /build/linux-zbOcpU/linux-3.16.7-ckt25/net/wireless/sme.c:920 cfg80211_connect+0x4aa/0x4f0 [cfg80211]()
[   54.070290]  [<ffffffff810677f7>] ? warn_slowpath_common+0x77/0x90
[   64.094209] WARNING: CPU: 0 PID: 1903 at /build/linux-zbOcpU/linux-3.16.7-ckt25/net/wireless/sme.c:920 cfg80211_connect+0x4aa/0x4f0 [cfg80211]()
[   64.094309]  [<ffffffff810677f7>] ? warn_slowpath_common+0x77/0x90

Answer 1

通常情况下，live的工作更好，因为它们没有使用机器的所有功能，所以它们是更自给自足的包。

首先用引导时间param关闭acpi，然后检查dsdt。