鼠标启动后需要一段时间才能开始工作。

Question

我最近刚刚安装了Ubuntu12.04 (64位)，我的一些USB设备已经停止工作。至少，他们不工作的前3-5分钟。我有两只老鼠(一只无线的，一只有线的)和一台摄像头，在启动后，Ubuntu需要3-5分钟才能认出它。最终，他们确实开始工作，但这需要很长时间！

结果：(当老鼠工作时.)

$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver
Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317
Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver

syslog条目似乎(在我看来是未经训练的)是问题所在：

Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [   17.420117] usb 2-3: device descriptor read/64, error -110
Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()]
Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [   32.636107] usb 2-3: device descriptor read/64, error -110
Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [   32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd
Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [   47.964131] usb 2-3: device descriptor read/64, error -110
Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [   63.180115] usb 2-3: device descriptor read/64, error -110
Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [   63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd
Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [   73.804158] usb 2-3: device not accepting address 4, error -110
Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [   73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd
Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [   84.324160] usb 2-3: device not accepting address 5, error -110
Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [   84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3
Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface
Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent
Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3
Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series  SERN:CN47CB60BJO2 serial:CN47CB60BJO2
Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [   84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd
Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found
Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [   99.904185] usb 5-3: device descriptor read/64, error -110
Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [  115.144188] usb 5-3: device descriptor read/64, error -110
Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [  115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd
Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [  130.520196] usb 5-3: device descriptor read/64, error -110
Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [  145.760179] usb 5-3: device descriptor read/64, error -110
Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [  146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd
Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [  156.408168] usb 5-3: device not accepting address 4, error -110
Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [  156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd
Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [  166.952181] usb 5-3: device not accepting address 5, error -110
Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [  166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [  167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2"
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [  167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [  167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [  167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3"
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [  167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [  167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17
Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [  167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1
Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted
Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1
Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted
Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1
Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted
Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

Answer 1

虽然这可能并不适合每个人，但下面是我为鼠标和键盘解决这个问题所做的事情。我在电脑里放了一个PS2键盘和鼠标。效果很好。

此外，我在我的Ubuntu机器上安装了一个Synergy客户端，所以在我登录之后，我使用了共享鼠标和键盘。

我希望这能帮到你。

爱与和平，

乔

Answer 2

这种问题可能是由于另一个USB外围设备故障而出现的。几天前，我遇到了一个非常类似的问题，同样的syslog错误：

Mar 19 07:56:27 XX kernel: [16.524042] usb 2-3: device descriptor read/64, error -110

我发现这个问题与操作系统无关，因为我在Windows下也有同样的问题。

• 拔掉所有USB连接(包括内部主板连接，比如case的集线器外观)确实解决了我的问题。碰巧我又把它插上了，一切都很好。在我的案例中，USB集线器是有罪的。

Answer 3

哇，这似乎很难。我不是百分之百确定这是否会有帮助，但你可能想考虑尝试xorg-edgers的PPA。这是非常试验性的，但他们可能正好有你需要的司机。(他们为我的显卡提供了驱动程序，Radeon 4350，之前硬件加速为零。)缺点之一是包建立在彼此的基础上，所以您需要整个PPA来获得一个小驱动程序。:/

无论如何，这并不适合所有人，但是如果你要么喜欢测试版/实验版，要么非常绝望，那么这可能值得一试。

若要使用此PPA，请按CTRL+ALT+T并键入：

sudo add-apt-repository ppa:xorg-edgers/ppa
sudo apt-get update

或者，如果终端让您感到不舒服，请转到您的更新管理器(或软件中心)，选择Edit>Software Sources。

然后，选择Other Sources选项卡并选择Add...。

键入deb http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu precise main并单击Add Source。现在，单击Close并返回到Update。

单击Check，让它完成，然后单击Install。