blocks|key|4798267|text|我们用-1600标记。它几乎有我们所要求的每一种标签格式，并且适用于服务器、补丁面板和电缆。我唯一的抱怨是P-触控磁带很贵。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4798268|在PT-1600上支持的条形码格式是:代码39，I-2/5，EAN13，EAN8，UPC，UPC，CODABAR，EAN128，CODE128.|4798269|📷|atomic|entityMap|0|LINK|mutability|MUTABLE|url|https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT1600|1|IMAGE|IMMUTABLE|imageUrl|https://www.brother-usa.com/USAImages/ModelImages/detail/pt1600-d.jpg|imageAlt^0|3|5|0|0|0|0|1|1^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@$A|W|B|X|1|Y]]|C|$]]|$1|D|3|E|5|6|7|Z|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|10|8|@]|9|@$A|11|B|12|1|13]]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]|P|$5|Q|L|R|C|$S|T|U|-4]]]]

We use a <a href="https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT1600" rel="nofollow noreferrer">P-Touch PT-1600</a> for our labeling. It has just about every label format we have ever required and works well for servers, patch panels and cables. My only complaint is that P-Touch tape is expensive.

The barcode format supported on the PT-1600 are: Code 39, I-2/5, EAN13, EAN8, UPC-A, UPC-E, CODABAR, EAN128, CODE128.

<img src="https://www.brother-usa.com/USAImages/ModelImages/detail/pt1600-d.jpg" alt="PT-1600">

blocks|key|4798390|text|我使用DYMO+RhinoPRO+5000。它是手握的。它有一个线包模式和一个非常灵活的尼龙带，以允许标签猫5电缆和其他电线。它还做3/4“宽的标准标签，也有热收缩管标签，很难去除电线标签。我已经使用了6个月，取得了很好的效果。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|entityMap^0^^$0|@$1|2|3|4|5|6|7|C|8|@]|9|@]|A|$]]]|B|$]]

I use the DYMO RhinoPRO 5000. It is hand held. It has a wire wrap mode and a very flexible nylon tape to allow labeling cat 5 cables and other wires. It also does the standard labels up to 3/4" wide. They also have heat shrink tubing labels for very hard to remove wire labeling. I have been using it for 6 months and have had good results.

blocks|key|4798583|text|我用过P+9500+C兄弟，它是一种与PC相连的标签打印机，我对它非常满意。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4798584|📷|atomic|4798585|4798586|如果你需要也能做一次性标签，那么九千六百也有一个内置键盘。|4798587|计算机连接模型的优点是，它们的用途非常广泛，而且在需要打印大量标签时非常方便。|entityMap|0|LINK|mutability|MUTABLE|url|https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT9500PC|1|IMAGE|IMMUTABLE|imageUrl|https://www.brother-usa.com/USAImages/ModelImages/Medium/pt9500pc.jpg|imageAlt|2|https://www.brother-usa.com/USAImages/ModelImages/Medium/pt9600.jpg|3|https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT9600^0|3|A|0|0|0|1|1|0|0|1|2|0|G|4|3|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@$A|13|B|14|1|15]]|C|$]]|$1|D|3|E|5|F|7|16|8|@]|9|@$A|17|B|18|1|19]]|C|$]]|$1|G|3|E|5|F|7|1A|8|@]|9|@$A|1B|B|1C|1|1D]]|C|$]]|$1|H|3|I|5|6|7|1E|8|@]|9|@$A|1F|B|1G|1|1H]]|C|$]]|$1|J|3|K|5|6|7|1I|8|@]|9|@]|C|$]]]|L|$M|$5|N|O|P|C|$Q|R]]|S|$5|T|O|U|C|$V|W|X|-4]]|Y|$5|T|O|U|C|$V|Z|X|-4]]|10|$5|N|O|P|C|$Q|11]]]]

I've used the <a href="https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT9500PC" rel="nofollow noreferrer">Brother P-Touch 9500C</a> which is a PC-connected label printer and have been very happy with it.

<a href="https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT9500PC" rel="nofollow noreferrer"><img src="https://www.brother-usa.com/USAImages/ModelImages/Medium/pt9500pc.jpg" alt="Brother P-Touch 9500C" title="Brother P-Touch 9500C"></a> <a href="https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT9600" rel="nofollow noreferrer"><img src="https://www.brother-usa.com/USAImages/ModelImages/Medium/pt9600.jpg" alt="Brother P-Touch 9600" title="Brother P-Touch 9600"></a>

If you need to be able to also do one-off labels then the <a href="https://www.brother-usa.com/Ptouch/ModelDetail.aspx?ProductID=PT9600" rel="nofollow noreferrer">P-Touch 9600</a> also has a built-in keyboard.

The advantage of a computer-connected model is that they are extremely versatile and can be very handy when a lot of labels need to be printed.

blocks|key|696986|text|我们使用这一个，很大程度上是因为我们雇佣的承包商运行我们的线路(目前为止大约有15k+)，使用他们做他们所有的标签。它很好，因为它输出的标签更适合配线，但也可以打印“正常”标签。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|entityMap|0|LINK|mutability|MUTABLE|url|http://www.bradyid.com/idpal^0|4|3|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@$A|L|B|M|1|N]]|C|$]]]|D|$E|$5|F|G|H|C|$I|J]]]]

We use <a href="http://www.bradyid.com/idpal" rel="nofollow noreferrer">this one</a>, largely because the contractors we hire to run our wire (roughly 15k runs so far), use them to do all of their labeling. It's nice because it outputs labels more suitable for wiring, but can also print "normal" labels.

blocks|key|4798363|text|我已经有一段时间不用自己使用这些东西了，但我记得我使用了一种低端的P-触控模型和那些只工作了50%25的摇摇欲坠的橡胶钥匙，让我发疯了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4798364|您可能想看看兄弟电信网页对他们的建议。PC可连接打印机具有Windows打印机驱动程序，几乎可以从任何应用程序中使用，但它们与您可能已经用于资产管理的软件(如D-Tools+System+Integrator+4.x/5.x、简单可靠的软件SmartOffice、Holbrook+Enterprises、JDSU/Test计划-Um&+Plan-Um+AP或科罗拉多vNetBuilder)有非常好的集成。|offset|length|entityMap|0|LINK|mutability|MUTABLE|url|http://www.brother-usa.com/Business/Telco/labeling-solutions-telco.aspx^0|0|6|6|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@$D|O|E|P|1|Q]]|A|$]]]|F|$G|$5|H|I|J|A|$K|L]]]]

It has been a while since I've had to use one of these things myself, but I remember using one of the lower-end P-Touch models and those wobbly rubber keys that only worked 50% of the time drove me nuts.

You probably want to take a look at <a href="http://www.brother-usa.com/Business/Telco/labeling-solutions-telco.aspx" rel="nofollow noreferrer">Brother's Telco page</a> for their recommendations. The PC-connectable printers have Windows printer drivers that can be used from just about any application, but in particular, they have very good integration with software that you may already be using for asset management (like D-Tools System Integrator 4.x/5.x, Simply Reliable Software SmartOffice, Holbrook Enterprises WireCAD, JDSU/Test-Um Plan-Um &amp; Plan-Um AP, or Colorado vNetBuilder).

blocks|key|4798826|text|我一直认为手持P-触摸是标记数据中心的最佳解决方案。这是便携式和通用的功能，它的顺序和编号标签。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4798827|4798828|我觉得这很重要，因为我们使用的模式。|4798829|方框正面的DNS名称|unordered-list-item|4798830|后轨上的U号|4798831|电缆总是两条线。顶线是当前连接。底线是目标(另一端)。|4798832|4798833|房间/数据中心+-+行号+-+机架号+-+U数+-+PCI插槽/设备/外围设备/刀片+-+端口|4798834|4798835|标签总是贴在热中心和冷中心。它们不容易擦掉。他们不容易抓挠。根据我上面列出的现有尺寸和惯例，我们立即知道了它的用途和去向。|entityMap|0|LINK|mutability|MUTABLE|url|http://www.brother-usa.com/Ptouch/Ptouch_HandHeld/^0|5|6|0|0|0|0|0|0|0|1|1|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@$A|11|B|12|1|13]]|C|$]]|$1|D|3|-4|5|6|7|14|8|@]|9|@]|C|$]]|$1|E|3|F|5|6|7|15|8|@]|9|@]|C|$]]|$1|G|3|H|5|I|7|16|8|@]|9|@]|C|$]]|$1|J|3|K|5|I|7|17|8|@]|9|@]|C|$]]|$1|L|3|M|5|I|7|18|8|@]|9|@]|C|$]]|$1|N|3|-4|5|I|7|19|8|@]|9|@]|C|$]]|$1|O|3|P|5|I|7|1A|8|@]|9|@]|C|$]]|$1|Q|3|-4|5|6|7|1B|8|@]|9|@]|C|$]]|$1|R|3|S|5|6|7|1C|8|@]|9|@]|C|$]]]|T|$U|$5|V|W|X|C|$Y|Z]]]]

I have always found the <a href="http://www.brother-usa.com/Ptouch/Ptouch_HandHeld/" rel="nofollow noreferrer">Handheld P-touch</a> to be the best solution for labeling a Data Center. It's Portable and versatile with it's functions of sequential and numbered labels. 
I find that important because of the pattern we use.

<ul>
<li>DNS Name on Box Front</li>
<li>U-Number on Rear Rails</li>
<li>Cables always two lines. Top line is current connection. Bottom line is the destination (other end).</li>
<li><ul>
<li>[Room / Data Center] - [Row Number] - [Rack Number] - [U-Number] - [PCI Slot / Device / Peripheral / Blade] - [Port] </li>
</ul></li>
</ul>

The labels have always stuck in hot centers and cold centers. They don't easily rub off. They don't scratch easily. And with the available sizes and convention I listed above we know instantly what is what and where it is going.

blocks|key|697276|text|无论品牌，一个好的手持应该有一个QWERTY键盘.常用的符号如连字符和下划线应该很容易找到，而不是隐藏在菜单中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|entityMap^0^^$0|@$1|2|3|4|5|6|7|C|8|@]|9|@]|A|$]]]|B|$]]

Regardless of brand, a good hand-held should have a QWERTY keyboard. Commonly used symbols such as hyphen and underscore should be easy to find, not buried in a menu.

blocks|key|4798057|text|你需要一个标签打印机，你连接到你的电脑，我现在没有一个，但最后一个甚至可以打印图片。(这些图片可能是条形码等)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4798058|然而，软件是限制因素。但这是个有趣的小游戏。|4798059|也许像这样？|4798060|丙氨酸氨基转移酶(alt文本文本)|offset|length|entityMap|0|LINK|mutability|MUTABLE|url|http://www.superwarehouse.com/images/products/brother_ql570.jpg^0|0|0|0|0|H|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|S|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|T|8|@]|9|@$H|U|I|V|1|W]]|A|$]]]|J|$K|$5|L|M|N|A|$O|P]]]]

You need a label printer that you connect to your computer, 
I don't have one right now but the last one could even print pictures.
(And those pictures could have been barcodes etc etc)

However the software was the limiting factor....
But is was a funny little thing to play with.

Maybe something like this???

<a href="http://www.superwarehouse.com/images/products/brother_ql570.jpg" rel="nofollow noreferrer">alt text http://www.superwarehouse.com/images/products/brother_ql570.jpg</a>

blocks|key|697010|text|我也用。它将打印多达4行文字每个标签，无论是水平的或垂直的。作为PC连接几乎没有限制，因为它可以做图形以及。如果有什么是P不会做的，那就没问题了。碰巧我在一家专门生产标签的印刷公司工作，我们有一台专为短时间运行的机器，即使是单个标签，这也是完美的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|entityMap^0^^$0|@$1|2|3|4|5|6|7|C|8|@]|9|@]|A|$]]]|B|$]]

I use a P-Touch also. It will print up to 4 lines of text per label, either horizontal or vertical. Being PC connected there is almost no limit, as it can do graphics as well. If there is anything that the P-Touch won't do it's not a problem. It just happens that I work for a printing company that specialises in labels and we have a special machine for short runs which is perfect even for single labels.

blocks|key|697238|text|我们有PT-9500+P和PT-1600.|type|unstyled|depth|inlineStyleRanges|entityRanges|data|697239|PT-9500个人电脑是方便的做大批标签，如当重新布线的橱柜。它有一些很好的软件，可以从不同的来源进口，所以如果你有一个机架管理软件，记录端口和什么不是和做出口，它使生活更容易。|697240|该PT-1600是方便的快速一次标签.|697241|至于LTO磁带，PT-9500+PT软件有大量与媒体相关的模板，您可能会发现这个站点也很方便。它将输出PDF文件与各种格式的标签和条形码的东西，打印在标准的艾弗里标签股票。|offset|length|entityMap|0|LINK|mutability|MUTABLE|url|http://tapelabels.librelogiciel.com/^0|0|0|0|14|2|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|S|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|T|8|@]|9|@$H|U|I|V|1|W]]|A|$]]]|J|$K|$5|L|M|N|A|$O|P]]]]

We have both the P-Touch PT-9500PC and P-Touch PT-1600.

The PT-9500PC is handy for doing large batches of labels, like when rewiring a cabinet. It has some nice software that allows imports from various sources, so if you have a rack management software that records ports and what not and does exports, it makes life a lot easier.

The PT-1600 is handy as a quick one time labeler.

As for the LTO tapes, the PT-9500PC software has a bunch of media related templates, you might find this <a href="http://tapelabels.librelogiciel.com/" rel="nofollow noreferrer">site</a> handy too. It'll dump out PDF file with a various format labels and barcode stuff that prints on standard Avery label stock.

Right now, I've got a Brother P-touch labeler that prints four or five sizes of text on one long label. It has features such as italics and bold. It's...non-ideal. 

What do you use in your server room? I have heard of labelers that will print vertically as well as horizontally, or which can produce labels for cable management as well. I also think it would be great to be able to produce barcodes for my tapes (LTO-3). 

So basically, I would like a labeler that prints normal, can print cable labels, and can print barcodes. Unicorn optional. 

Any ideas, or could you even suggest the best labeler for each solution?

Best labeler for the server room?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云AI代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

功能1上新10个字符

功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符。

功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符。

功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符

功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符

功能4上新

文章&问答评论现已支持表情

全新交互，全新视觉，新增快捷键、悬浮工具栏、高亮块等功能并同时优化现有功能，全面提升创作效率和体验

社区富文本编辑器全新改版！诚邀体验～ 

精选全网热门MCP server，让你的AI更好用 🚀

💥开发者 MCP广场重磅上线！

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

现在，我有一个P触控手柄贴纸器，在一个长长的标签上印上四到五种大小的文字。它具有斜体和粗体等功能。这.不理想。你在你的服务器室里用什么？我听说过的标签，将打印垂直和水平，或可以产生标签，为电缆管理以及。我也认为能够为我的磁带制作条形码(LTO-3)是很棒的。因此，基本上，我想要一个标签，打印正常，可以打印电缆标签，并可以打印条形码。独角兽可选。有什么想法，或者你能为每一种解决方案提出最好的标签吗？

问服务器室最好的标签？
EN

回答 10

Server Fault用户

Server Fault用户

Server Fault用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问服务器室最好的标签？EN

回答 10

Server Fault用户

Server Fault用户

Server Fault用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问服务器室最好的标签？
EN