Cisco Air-AP1252ag - 15.2无法正确获得多个SSID广告

Question

我对AIR- an 1252ag有个问题，它不会在信标中宣传多个SSID。我试图设置3个SSID，1个隐藏(控件)，1个来宾(工作良好)，1个内部数据-Wifi。

问题是内部数据WLAN没有在信标中发送SSID。对于终端主机/客户端来说，它就像一个隐藏的网络。

我用c1250-k9w7-tar.152-2.JA.tar作为图像。从阅读配置指南开始，我开始认为我应该回到12.4。但我想问这个问题，看看有没有人能帮我先把这件事做好。这应该很简单，我可能遗漏了一些愚蠢的东西。

下面是配置。我尝试了一种信息元素ssidl广告的组合，在dot11 ssid下有&不带mbssid。但我只是想不出正确的组合才能得到正确的ssid广告。

!
dot11 syslog
!
dot11 ssid Controls
   vlan 32
   authentication open
   authentication key-management wpa version 2
   mbssid dtim-period 50
   wpa-psk ascii 7 xxxxxxxxxxxxxxx
!
dot11 ssid Guest
   vlan 31
   authentication open
   mbssid guest-mode dtim-period 75
   information-element ssidl advertisement
!
dot11 ssid Data-Wifi
   vlan 30
   authentication open
   authentication key-management wpa version 2
   mbssid dtim-period 75
   wpa-psk ascii 7 xxxxxxxxxxxxxxxxxx
   information-element ssidl advertisement
!
crypto pki token default removal timeout 0
!
!
username admin privilege 15 secret xxxxxxxxxxxxxxxxxxxxx
!
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption vlan 30 mode ciphers aes-ccm tkip
 !
 encryption vlan 32 mode ciphers aes-ccm tkip
 !
 ssid Controls
 !
 ssid Guest
 !
 ssid Data-Wifi
 !
 antenna gain 0
 mbssid
 station-role root access-point
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.30
 encapsulation dot1Q 30
 no ip route-cache
!
interface Dot11Radio0.31
 encapsulation dot1Q 31
 no ip route-cache
!
interface Dot11Radio0.32
 encapsulation dot1Q 32
 no ip route-cache
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 shutdown
 antenna gain 0
 dfs band 3 block
 channel dfs
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface GigabitEthernet0.30
 encapsulation dot1Q 30
 no ip route-cache
!
interface GigabitEthernet0.31
 encapsulation dot1Q 31
 no ip route-cache
!
interface GigabitEthernet0.32
 encapsulation dot1Q 32
 no ip route-cache
!
interface BVI1
 ip address 172.16.99.15 255.255.255.0
 no ip route-cache
!
bridge 1 route ip
bridge 1 protocol ieee

Answer 1

Data-Wifi没有启用来宾模式(mbssid guest-mode)，所以它不会发出信号.

另见：客式和mbssid嘉宾模式