需要获得更多关于我的感应器，风扇速度等的信息

Question

我的感应器在18.04工作，但20.04有困难

我安装了传感器和运行传感器-检测选择默认的选择。

我希望有机会了解我下一步需要做什么。

谢谢。

sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1:         +2.1°C  (high = +70.0°C)
                       (crit = +80.0°C, hyst = +79.0°C)

radeon-pci-0008
Adapter: PCI adapter
temp1:         +2.0°C  (crit = +120.0°C, hyst = +90.0°C)

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:           N/A  (crit =  65.19 W)

还有我的硬件信息。不确定你是否需要其他信息。

sudo dmidecode | more

Base Board Information (Mother board)
    Manufacturer: Gigabyte Technology Co., Ltd.
    Product Name: F2A68HM-H

BIOS Information
        Vendor: American Megatrends Inc.
        Version: FB
        Release Date: 04/22/2015

AMD A8-7600 Radeon R7, 10 Computer Cores 4C+6G x 4

尝试一些议员提出的其他建议：

 E: Package 'hddtemp' has no installation candidate 

我试着安装hddtemp。

我试过这个

sudo apt更新wget sudo sudo apt安装./hddtemp_0.3- be 15-53_amd64.deb和got下载以根文件‘/home/andy/hddtemp_0.3-be 15-53_amd64.deb’无法被用户'_apt‘访问。- pkgAcquire::Run (13:拒绝许可)

我做了传感器检测。

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found `ITE IT8620E Super IO Sensors'                        Success!
    (address 0x228, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): 
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): 

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): 
Using driver `i2c-piix4' for device 0000:00:14.0: AMD Hudson-2 SMBus

Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 3 at 0b00 (i2c-2)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 4 at 0b00 (i2c-3)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 1 at 0b20 (i2c-4)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x90 (i2c-5)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x91 (i2c-6)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x92 (i2c-7)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x93 (i2c-8)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x94 (i2c-9)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x95 (i2c-10)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: card0-VGA-1 (i2c-11)
Do you want to scan it? (yes/NO/selectively): 


Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `it87':
  * ISA bus, address 0x228
    Chip `ITE IT8620E Super IO Sensors' (confidence: 9)

Driver `k10temp' (autoloaded):
  * Chip `AMD Family 15h thermal sensors' (confidence: 9)

Driver `fam15h_power' (autoloaded):
  * Chip `AMD Family 15h power sensors' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)

Unloading cpuid... OK

我运行了感应器-f，得到了这个：

andy@7 ~/Downloads> sensors -f
fam15h_power-pci-00c4
Adapter: PCI adapter
power1:           N/A  (crit =  65.19 W)

radeon-pci-0008
Adapter: PCI adapter
temp1:        +41.0°F  (crit = +248.0°F, hyst = +194.0°F)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +39.6°F  (high = +158.0°F)
                       (crit = +176.0°F, hyst = +174.2°F)

it8620-isa-0228
Adapter: ISA adapter
in0:           1.03 V  (min =  +0.00 V, max =  +3.06 V)
in1:           1.54 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.02 V  (min =  +0.00 V, max =  +3.06 V)
in3:           2.05 V  (min =  +0.00 V, max =  +3.06 V)
in4:           2.04 V  (min =  +0.00 V, max =  +3.06 V)
in5:           2.23 V  (min =  +0.00 V, max =  +3.06 V)
in6:           2.23 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.34 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.17 V  
fan1:        1730 RPM  (min =   10 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:         556 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
temp1:        +93.2°F  (low  = +260.6°F, high = +260.6°F)  sensor = thermistor
temp2:       -198.4°F  (low  = +260.6°F, high = +260.6°F)  sensor = disabled
temp3:        +64.4°F  (low  = +32.0°F, high = +140.0°F)  sensor = Intel PECI
temp4:       +109.4°F  
temp5:       +113.0°F  
temp6:       +113.0°F  
intrusion0:  ALARM

Answer 1

1. 尝试以下命令来安装hddtemp：wget http://archive.ubuntu.com/ubuntu/pool/universe/h/hddtemp/hddtemp_0.3-beta15-53_amd64.deb mv hddtemp_0.3-beta15 15-53_amd64. apt /tmp cd /tmp sudo apt./hddtemp_0.3-beta15 15-53_amd64.deb
2. 对于传感器，首先加载可以使用以下命令读取驱动温度的内核驱动程序:Sudomod探针drivetemp

然后运行以下命令：

   sudo sensors-detect
   sensors

Answer 2

在20.04中，hddtemp位于宇宙存储库中。检查是否已将其添加到系统中。

$ apt policy hddtemp
hddtemp:
  Installed: 0.3-beta15-53
  Candidate: 0.3-beta15-53
  Version table:
 *** 0.3-beta15-53 500
        500 [local mirror]/us.archive.ubuntu.com/ubuntu focal/universe amd64 Packages
        100 /var/lib/dpkg/status

加在这里：