Debian上88x2bu卡的问题

Question

我在亚马逊上买了这张卡

我把卡连接到usb3端口好的

我下载并安装了驱动程序。

git clone https://github.com/morrownr/88x2bu-20210702
make
make install
modprobe 88x2bu

在dmesg上没有错误，一切看起来都很好。

然后，我开始使用网络管理器配置网络第一。

nmcli device wifi list

报告我的网络

***************  hotspot-2  Infra  36    405 Mbit/s  70      ▂▄▆_  WPA2 WPA3
***************  hotspot-1  Infra  11    195 Mbit/s  60      ▂▄▆_  WPA2 WPA3

我试着连接到第一个(我有密码)

nmcli device wifi connect hotspot-1 password 'mypass' 

并返回此错误

Error: Connection activation failed: (7) Secrets were required, but not provided.

热点-2也是一样。

所以我尝试了一种经典的方法(wpa_supplicant + dhclient)

我配置了wpa_supplicant.conf

network={
ssid="hotspot-1"
psk="Thepass"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
auth_alg=OPEN
}

我启动wpa_supplicant守护进程并说..

wlan1: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlan1: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlan1: Trying to associate with ********* (SSID='hospot-2' freq=5180 MHz)
nl80211: kernel reports: Authentication algorithm number required
wlan1: CTRL-EVENT-STARTED-CHANNEL-SWITCH freq=5180 ht_enabled=1 ch_offset=1 ch_width=80 MHz cf1=5210 cf2=0
wlan1: Associated with ****
wlan1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlan1: CTRL-EVENT-DISCONNECTED bssid=********* reason=2
wlan1: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
wlan1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="hotspot-2" auth_failures=1 duration=10 reason=WRONG_KEY
wlan1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
wlan1: CTRL-EVENT-SSID-REENABLED id=0 ssid="hotspot-2"

所以我尝试了另一种配置

ssid="network SSID"
key_mgmt=WPA-PSK-SHA256
psk=xxx
ieee80211w=2

我试过and..nothing发生

Successfully initialized wpa_supplicant
nl80211: kernel reports: Authentication algorithm number required
wlan1: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1

有什么建议吗？

Answer 1

解决办法:我已经安装了Slackware 15，这张卡非常适合nmcli。