不必要的只读网络接口(ifupdown)

Question

我有一个安卓电视机箱运行阿姆斯 5.41 (Ubuntu16.04.5)。自从我从科迪人变成伴侣后，我发现了一个网络问题。

盒子通过以太网连接，MATE显示两个接口: eth0和ifupdown(eth0)。我想使用eth0，因为我不能在ifupdown上设置静态IP，因为它是只准备好的。每次我重新启动伴侣时，它都会自动连接到ifupdown，从而导致没有任何网络。

我需要静态IP，因为我已经在它上运行了皮孔，并且启用了DHCP服务器。在网络管理器中设置了eth0的静态IP。如何删除此接口，或至少将普通eth0设置为默认值？

/etc/网络/接口

# Wired adapter #1
allow-hotplug eth0
no-auto-down eth0
iface eth0 inet dhcp
#address 192.168.0.17
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
#       hwaddress ether # if you want to set MAC manually
#       pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838


# Wireless adapter #1
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually. The below lines are only meant as an example how configuration could
# be done in an anachronistic way:
#
#allow-hotplug wlan0
#iface wlan0 inet dhcp
#address 192.168.0.100
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
#   wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Disable power saving on compatible chipsets (prevents SSH/connection dropouts over WiFi)
#wireless-mode Managed
#wireless-power off

# Local loopback
auto lo
iface lo inet loopback

Answer 1

来自/etc/network/interfaces：

# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually.

编辑/etc/NetworkManager/NetworkManager.conf，然后更改以下内容：

[ifupdown]
managed=true

至

[ifupdown]
managed=false

网络管理器将不会管理在/etc/network/interfaces下配置的网络接口，然后运行：

sudo systemctl restart network-manager

使用命令sudo nmtui配置静态IP。