带核心开关的asa连接到wlc

Question

有4个交换机3560 POE-8，其中2个已被重置，w L c2100也被重置，但有防火墙和一个交换机。保留旧配置。我试着把网络恢复到原来的配置，请帮助..我不是无线方面的专家。连接到你的交换机和防火墙的配置..。

开关：

WLAN-SW0#show running-config
Building configuration...

Current configuration : 1918 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname WLAN-SW0
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$LKX4$JVSDzby6c93T7vqq9z3uD0
enable password cisco123
!
username admin privilege 15 secret 5 $1$3Xg0$tsxaOVuS90QSOGrNDqYmZ.
no aaa new-model
system mtu routing 1500
ip subnet-zero
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.2 10.10.10.21
!
ip dhcp pool hanin
   network 10.10.10.0 255.255.255.0
   dns-server 10.10.10.2
   default-router 10.10.10.20
!
ip dhcp pool hain
!
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
interface FastEthernet0/1
 description CONNECTED-TO-AP
 switchport access vlan 100
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/2
 description CONNECTED-TO-AP
 switchport access vlan 100
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/3
 description CONNECTED-TO-AP
 switchport access vlan 100
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/4
 description CONNECTED-TO-AP
 switchport access vlan 100
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/5
!
interface FastEthernet0/6
 switchport access vlan 100
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/7
 description CONNECTED-TO-FIREWALL-ON-0/3
 switchport access vlan 100
 switchport mode access
 spanning-tree portfast
!
interface FastEthernet0/8
 description CONNECTED-TO-FIREWALL-ON-0/0
!
interface GigabitEthernet0/1
!
interface Vlan1
 ip address 192.168.1.20 255.255.255.0
!
interface Vlan100
 ip address 172.16.100.50 255.255.255.0
!
ip classless
ip http server
!
!
control-plane
!
!
line con 0
 exec-timeout 0 0
line vty 0 4
 password cisco
 login local
line vty 5 15
 password cisco
 login
!
end

ASA：

ciscoasa# show running-config
: Saved
:
ASA Version 8.0(4)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 172.16.10.1 255.255.255.0
!
interface Vlan2
 nameif outside
 security-level 0
 ip address dhcp setroute
!
interface Vlan100
 no forward interface Vlan2
 nameif WLAN-MANAGEMENT
 security-level 50
 ip address 172.16.100.55 255.255.255.0
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
 switchport access vlan 100
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
object-group protocol DM_INLINE_PROTOCOL_1
 protocol-object ip
 protocol-object icmp
access-list inside_access_in extended permit udp 172.16.10.0 255.255.255.0 any eq domain
access-list inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 172.16.10.0 255.255.255.0 172.16.100.0 255.255.255.0
access-list inside_access_in extended permit ip 172.16.10.0 255.255.255.0 any
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu WLAN-MANAGEMENT 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-647.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
access-group inside_access_in in interface inside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 172.16.10.0 255.255.255.0 inside
http 172.16.100.0 255.255.255.0 WLAN-MANAGEMENT
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcp-client client-id interface outside
dhcpd auto_config outside
!
dhcpd address 172.16.10.2-172.16.10.33 inside
dhcpd dns 4.2.2.2 8.8.8.8 interface inside
dhcpd enable inside
!

threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password e1z89R3cZe9Kt6Ib encrypted privilege 15
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
  inspect http
  inspect icmp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:6998286872ff4c7872572cf02fcd34ed
: end
ciscoasa#

Answer 1

我还是不确定我是否理解你的请求。但是，假设您想在ASA上配置DHCP，可以使用以下示例：

dhcpd address 172.16.10.20 172.16.10.254 inside
dhcpd dns 10.10.10.2

dhcpd address 172.16.100.10 172.16.100.254 WLAN-MANAGEMT
dhcpd dns 10.10.10.2