我需要关于Meraki AP配置的帮助

Question

大家好，我的这个端口gi1 2/0/41是为工作站配置的，而gi1/0/18端口是为Meraki Ap配置的，我需要更正端口gi1 2/0/41中的配置，并且make是相同的端口gi1/0/18，我不想影响网络或引发问题，而且我是网络环境中的新手。

BLDG-B-IDF-01#show run int gi1/0/18
Building configuration...

Current configuration : 119 bytes
!
interface GigabitEthernet1/0/18
 description MERAKI AP
 switchport trunk native vlan 103
 switchport mode trunk
end

BLDG-B-IDF-01#show run int gi2/0/41
Building configuration...

Current configuration : 617 bytes
!
interface GigabitEthernet2/0/41
 description MERAKI AP
 switchport access vlan 110
 switchport trunk native vlan 103
 switchport mode trunk
 switchport nonegotiate
 switchport voice vlan 922
 switchport port-security maximum 5
 switchport port-security violation restrict
 switchport port-security aging time 1
 switchport port-security aging type inactivity
 switchport port-security
 storm-control broadcast level 2.00 1.00
 auto qos trust dscp
 spanning-tree portfast
 spanning-tree bpduguard enable
 service-policy input AutoQos-4.0-Trust-Dscp-Input-Policy
 service-policy output AutoQos-4.0-Output-Policy
end

Answer 1

您可以通过键入(或粘贴)以下命令使它们保持不变：

config t
default interface gi 2/0/41
interface Gi 2/0/41
 description MERAKI AP
 switchport trunk native vlan 103
 switchport mode trunk
end