blocks|key|1513378|text|我发现在我打开防火墙中的端口9917之后，空白页面错误停止了，我可以继续安装。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1513379|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I found out that after I opened the port 9917 in my firewall,the blank pages error stopped and I can continue with the setup just fine.

blocks|key|2163816|text|我也经历过同样的问题，但简单的重启就修复了它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2163817|试试看:-|2163818|sudo+service+jenkins+stop
sudo+service+jenkins+start|code-block|syntax|javascript|2163819|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I experienced the same problem but a simple restart fixed it .

Just try this :-

<pre><code>sudo service jenkins stop
sudo service jenkins start
</code></pre>

blocks|key|1513508|text|在大多数情况下，将url定位到https://../jenkins/index似乎解决了这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1513509|即使是第一次，向导完成后浏览器的后退按钮也会将我发送到工作页面:+http//:websiteDomain/login?from=%252|1513510|在我的例子中，我使用了(jenkins/jenkins+)+官方码头形象|1513511|entityMap|0|LINK|mutability|MUTABLE|url|https://../jenkins/index|1|https://github.com/jenkinsci/docker/blob/master/README.md^0|F|O|0|0|0|U|6|1|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@$A|S|B|T|1|U]]|C|$]]|$1|D|3|E|5|6|7|V|8|@]|9|@]|C|$]]|$1|F|3|G|5|6|7|W|8|@]|9|@$A|X|B|Y|1|Z]]|C|$]]|$1|H|3|-4|5|6|7|10|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]|P|$5|K|L|M|C|$N|Q]]]]

targeting the url to <a href="https://../jenkins/index" rel="noreferrer">https://../jenkins/index</a>
appeared to solve the problem in most cases.

even if the first time, Browser's back button once on the blank page after the wizard finished sent me to the working page: http//:websiteDomain/login?from=%2

In my case I used (jenkins/jenkins lts) the <a href="https://github.com/jenkinsci/docker/blob/master/README.md" rel="noreferrer">official docker image</a>

blocks|key|2164036|text|在获得Jenkins安装向导之后，空白页http://localhost:8080/index为我工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2164037|entityMap|0|LINK|mutability|MUTABLE|url|http://localhost:8080/index^0|K|R|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

After getting Jenkins Setup Wizard Blank Page <a href="http://localhost:8080/index" rel="noreferrer">http://localhost:8080/index</a> works for me.

blocks|key|2913678|text|我也有同样的问题，但我使用的是默认端口8080。我用这种方式安装了jenkins：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2913679|yum+install+jenkins|offset|length|style|CODE|2913680|然后我执行了：|2913681|systemctl+start.jenkins
systemctl+enable.jenkins|code-block|syntax|javascript|2913682|然后允许防火墙上的8080：|2913683|sudo+firewall-cmd+--zone=public+--permanent+--add-port=8080/tcp
sudo+firewall-cmd+--reload|2913684|而缺失的部分(至少对我来说)是：|2913685|systemctl+daemon-reload|2913686|此后，安装正常进行。我希望这能对其他人有用。|2913687|干杯|2913688|entityMap^0|0|0|J|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|13|8|@$D|14|E|15|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|16|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|17|8|@]|9|@]|A|$M|N]]|$1|O|3|P|5|6|7|18|8|@]|9|@]|A|$]]|$1|Q|3|R|5|L|7|19|8|@]|9|@]|A|$M|N]]|$1|S|3|T|5|6|7|1A|8|@]|9|@]|A|$]]|$1|U|3|V|5|L|7|1B|8|@]|9|@]|A|$M|N]]|$1|W|3|X|5|6|7|1C|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|1D|8|@]|9|@]|A|$]]|$1|10|3|-4|5|6|7|1E|8|@]|9|@]|A|$]]]|11|$]]

I was having the same issue, but I am using the default port 8080. I installed jenkins in this way: <code>yum install jenkins</code> 
 Then I executed: 

<pre><code>systemctl start.jenkins
systemctl enable.jenkins
</code></pre>

 
 
then allow 8080 on the firewall: 

<pre><code>sudo firewall-cmd --zone=public --permanent --add-port=8080/tcp
sudo firewall-cmd --reload
</code></pre>

 
And the part that was missing (at least for me) was : 

<pre><code>systemctl daemon-reload
</code></pre>

 
After that the installation came normally. I Hope this can be usefull for someone else. 

cheers

blocks|key|2163749|text|我在macOS+Sierra10.12上也有同样的问题，只需要重新启动守护进程。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2163750|sudo+launchctl+unload+-w+/Library/LaunchDaemons/org.jenkins-ci.plist
sudo+launchctl+load+-w+/Library/LaunchDaemons/org.jenkins-ci.plist|code-block|syntax|javascript|2163751|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I had same issue on macOS Sierra 10.12 and just had to restart the daemon.

<pre><code>sudo launchctl unload -w /Library/LaunchDaemons/org.jenkins-ci.plist
sudo launchctl load -w /Library/LaunchDaemons/org.jenkins-ci.plist
</code></pre>

blocks|key|1513734|text|我也有同样的问题。但我在码头集装箱里用詹金斯。在那之后，我做了下面的工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1513735|docker+stop+my_container_name
docker+start+my_container_name|code-block|syntax|javascript|1513736|对于您的情况，如果使用的是linux，则应该重新启动jenkins。|1513737|sudo+service+jenkins+stop
sudo+service+jenkins+start|1513738|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I too had same problem. But I'm using jenkins in docker container. So i did below after that it started to work.

<pre><code>docker stop my_container_name
docker start my_container_name
</code></pre>

For your case, you should restart your jenkins if you are using linux

<pre><code>sudo service jenkins stop
sudo service jenkins start
</code></pre>

blocks|key|2913986|text|停止并启动jenkins服务让我在windows上工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2913987|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Stopping and starting jenkins service made it work for me in windows.

blocks|key|1513589|text|我在Windows上也有同样的问题。我去了，发现Jenkins在那里做服务。我停止了服务，并再次启动，然后我可以看到页面。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1513590|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had the same issue on Windows. I went to the Windows Services and found Jenkins there as a service. I stopped the service and started again and then I could see the page.

blocks|key|2913858|text|我也面临着这个问题|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2913859|重新启动服务修复了它|offset|length|style|BOLD|2913860|sudo+systemctl+stop+jenkins+
sudo+systemctl+start+jenkins+
sudo+systemctl+status+jenkins|code-block|syntax|javascript|2913861|试着向你提出一个请求詹金斯url|2913862|curl+http://<your+jenkins+host>:<your+port>+|2913863|entityMap^0|0|0|A|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@$D|U|E|V|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|W|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|X|8|@]|9|@]|A|$]]|$1|O|3|P|5|J|7|Y|8|@]|9|@]|A|$K|L]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

I also faced this problem 

Restarting the service fixed it

<pre><code>sudo systemctl stop jenkins 
sudo systemctl start jenkins 
sudo systemctl status jenkins
</code></pre>

Try with make a request to you jenkins url

<pre><code>curl http://&lt;your jenkins host&gt;:&lt;your port&gt; 
</code></pre>

blocks|key|2163913|text|通过更改端口来修复它。(Windows10)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2163914|首先，打开命令行，然后转到：|2163915|cd+..。|2163916|cd+..。|2163917|cd+"Program+(x86)“(或任何有jenkins文件夹的地方)|2163918|cd+jenkins|2163919|目录|2163920|java+-jar+jenkins.war+--httpPort=8081|2163921|通过这样做，您可以将jenkins本地端口从8080更改为8081，从而避免任何混战。|2163922|警告:不要在命令行完成后关闭该命令行，请在输入localhost:8081之前确保它已打开。|2163923|entityMap^0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|W|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|X|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|Y|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Z|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|10|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|11|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|12|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|13|8|@]|9|@]|A|$]]|$1|R|3|S|5|6|7|14|8|@]|9|@]|A|$]]|$1|T|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|U|$]]

Managed to fixe it by changing the port.(windows10)

First you open the command line and proceed to:

cd .. 

cd ..

cd "Program Files (x86)" (or wherever you have the jenkins folder)

cd jenkins

dir

java -jar jenkins.war --httpPort=8081

by doing this you´re changing jenkins localhost port from 8080 to 8081 avoiding any conflits. 

Warning :do not close the command line after its done , make sure its open before you enter localhost:8081

blocks|key|2913929|text|在macOS上，和Linux一样，我不得不停止/启动jenkins服务以使其工作。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2913930|sudo+launchctl+unload+/Library/LaunchDaemons/my.jenkins.plist+
sudo+launchctl+load+-w+/Library/LaunchDaemons/my.jenkins.plist+|code-block|syntax|javascript|2913931|entityMap^0|Q|7|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|P|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|L|$]]

On macOS, same as Linux, I had to stop/start <code>jenkins</code> service to make it work

<pre><code>sudo launchctl unload /Library/LaunchDaemons/my.jenkins.plist 
sudo launchctl load -w /Library/LaunchDaemons/my.jenkins.plist 
</code></pre>

blocks|key|2164062|text|如果您碰巧使用一般的Java文件运行Jenkins，则在完成安装后需要重新启动。停止java+(如果在shell上使用Ctrl%2BC+)，然后使用|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2164063|$+java+-jar+jenkins.war+--httpPort=3001|code-block|syntax|javascript|2164064|注:我的jenkins在3001端口上运行。|2164065|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

If you happened to run Jenkins using generic Java war file, a restart will be required after finishing installation. Stop the java (using Ctrl+C if you on shell), then start again using 

<pre><code>$ java -jar jenkins.war --httpPort=3001
</code></pre>

Note: My jenkins run on port 3001

blocks|key|1513806|text|为了记录在案，由于https://issues.jenkins-ci.org/browse/JENKINS-59017中的Bogdan，这个问题在2.195被纠正了。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1513807|entityMap|0|LINK|mutability|MUTABLE|url|https://issues.jenkins-ci.org/browse/JENKINS-59017^0|9|1E|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

For the record, this problem was corrected in 2.195, thanks to Bogdan Sukonnov in <a href="https://issues.jenkins-ci.org/browse/JENKINS-59017" rel="nofollow noreferrer">https://issues.jenkins-ci.org/browse/JENKINS-59017</a>.

I have just installed Jenkins on my RHEL 6.0 server via npm:

<pre><code>npm -ivh jenkins-2.7.2-1.1.noarch.rpm
</code></pre>

I have also configured my port to be 9917 to avoid clashing with my Tomcat server, allowing me to access the Jenkins page at <code>ipaddress:9917</code>. After entering the initial admin password at the Unlock Jenkins page, I am presented with a blank page, with the header "SetupWizard [Jenkins]".

Anyone knows why am I getting a blank page, and how do I solve it?

Jenkins Setup Wizard Blank Page

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

EdgeOne AI 安全实战专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

我刚刚通过npm在我的RHEL6.0服务器上安装了Jenkins：npm -ivh jenkins-2.7.2-1.1.noarch.rpm我还将端口配置为9917，以避免与Tomcat服务器发生冲突，从而允许我在ipaddress:9917访问Jenkins页面。在解锁Jenkins页面输入初始管理密码后，我将看到一个空白页面，标题为"SetupWizard Jenkins“。有人知道为什么我会

问Jenkins安装向导空白页
EN

回答 14

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Jenkins安装向导空白页EN

回答 14

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Jenkins安装向导空白页
EN