SocketScan在Swift中获得电池电平

Question

无论我看起来尝试了什么，我现在都无法从iOS/SocketScan中获得电池级别。我使用的是10.3.36版本，到目前为止我的代码如下：

func onDeviceArrival(result: SKTRESULT, device deviceInfo: DeviceInfo!) {
    print("onDeviceArrival:\(deviceInfo.getName())")
scanApiHelper.postGetBattery(deviceInfo, target: self, response: #selector(onGetBatteryInfo))

}

func onGetBatteryInfo(scanObj: ISktScanObject) {

    let result:SKTRESULT = scanObj.Msg().Result()
    print("GetBatteryInfo status:\(result)")

    if (result == ESKT_NOERROR) {
        let batterylevel = scanObj.Property().getUlong()
        print("Battery is:\(batterylevel)")
    } else {
        print("Error GetBatteryInfo status:\(result)")
    }

然而，我得到的值是：

GetBatteryInfo status:0

Battery is:1677741312

如果我的代码是正确的，那么我如何使电池的结果，我得到一个有意义的结果，如百分比？

如果我离得很远，那么我如何得到像电池级别，固件版本等信息呢？

谢谢

大卫

Answer 1

编辑：Swift不支持SKTBATTERY_GETCURLEVEL。然而，文档解释说，电池电平响应包括以第一、第二和第三字节编码的最小、当前和最大电平。

以下内容相当于使用SKTBATTERY_GETCURLEVEL

Swift

func onGetBatteryInfo(scanObj: ISktScanObject) {

    let result:SKTRESULT = scanObj.Msg().Result()

    if(SKTSUCCESS(result)){

        let batteryInfo = scanObj.Property().getUlong();

        let batteryMin = ((batteryInfo >> 4) & 0xff);
        let batteryCurrent = ((batteryInfo >> 8) & 0xff);
        let batteryMax = ((batteryInfo >> 12) & 0xff);

        let batteryPercentage = batteryCurrent / (batteryMax - batteryMin);
        print("Battery is:\(batteryPercentage)")

        self.setBatteryLevel = batteryPercentage
        self.tableView.reloadData

    } else {

        print("Error GetBatteryInfo status:\(result)")
    }
}

目标-C

-(void) onGetBatteryInfo:(ISktScanObject*)scanObj {

SKTRESULT result=[[scanObj Msg]Result];
if(SKTSUCCESS(result)){

    long batteryLevel = SKTBATTERY_GETCURLEVEL([[scanObj Property] getUlong]);
    NSLog(@"BatteryInfo %ld", batteryLevel);

    [self setBatteryLevel:batteryLevel];
    [self.tableView reloadData];

} else {

    NSLog(@"Error GetBatteryInfo status: %ld",result);
}
}

Answer 2

这是我使用的代码。在appDelegate中为batteryPercentage定义了一个变量，当需要v值时读取该变量。该值由计时器每120秒更新一次，这样操作就可以在电平下降等情况下发生。

 func onBatteryLevel (scanObj: ISktScanObject) {
    let result: SKTRESULT = scanObj.Msg().Result()
    if (SKTRESULT(result) > -1) {
        let property: ISktScanProperty = scanObj.Property()
        var batteryLevel = property.getUlong()

        #if arch(x86_64) || arch(arm64)
            batteryLevel = (batteryLevel<<(48))>>(56)
            #else
            batteryLevel = (batteryLevel<<(48-32))>>(56-32)
        #endif
        batteryPercentage = Int(batteryLevel)
    } else {
        debug ("data error \(result)")
    }
}

Answer 3

对于Swift 4，我刚刚遇到了这个问题，并提出了以下解决方案。

var lastDeviceConnected : CaptureHelperDevice? {

    didSet {

        guard let lastDevice = self.lastDeviceConnected else { return }
        lastDevice.getBatteryLevelWithCompletionHandler { result, batteryLevel in

            guard result == SKTResult.E_NOERROR, let batteryLevel = batteryLevel else { return }

            let minimum = SKTHelper.getMinimumLevel(fromBatteryLevel: Int(batteryLevel))
            let maximum = SKTHelper.getMaximumLevel(fromBatteryLevel: Int(batteryLevel))
            let current = SKTHelper.getCurrentLevel(fromBatteryLevel: Int(batteryLevel))

            print("minimum: \(minimum)")
            print("maximum: \(maximum)")
            print("current: \(current)")

            // current is out battery level in %
            // minimum and maximum could for example be used for 
            // for a slider or something that visually presents
            // the battery status
        }
    }
}

在我的示例中，我是，而不是，处理可能没有设备或电池状态可能没有按预期检索的情况。我只是guard / return。在您的示例中，您可能需要处理这个问题。