用Android r10编译FFmpeg 2.3

Question

我想通过以下教程编译FFMpeg 2.3与Android r10：http://www.roman10.net/how-to-build-ffmpeg-for-android/

在收到几个错误后，我修改了构建脚本如下：

  #!/bin/bash
    ######################################################
# Usage:
# put this script in top of FFmpeg source tree
# ./build_android
# It generates binary for following architectures:
# ARMv6 
# ARMv6+VFP 
# ARMv7+VFPv3-d16 (Tegra2) 
# ARMv7+Neon (Cortex-A8)
# Customizing:
# 1. Feel free to change ./configure parameters for more features
# 2. To adapt other ARM variants
# set $CPU and $OPTIMIZE_CFLAGS 
# call build_one
######################################################
NDK=/usr/local/src/android-ndk-r10
PLATFORM=$NDK/platforms/android-8/arch-arm/
PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64
function build_one
{
./configure --target-os=linux \
    --prefix=$PREFIX \
    --enable-cross-compile \
    --extra-libs="-lgcc" \
    --arch=arm \
    --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \
    --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \
    --nm=$PREBUILT/bin/arm-linux-androideabi-nm \
    --sysroot=$PLATFORM \
    --extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS " \
    --disable-shared \
    --enable-static \
    --extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog" \
    --disable-everything \
    --enable-demuxer=mov \
    --enable-demuxer=h264 \
    --disable-ffplay \
    --enable-protocol=file \
    --enable-avformat \
    --enable-avcodec \
    --enable-decoder=rawvideo \
    --enable-decoder=mjpeg \
    --enable-decoder=h263 \
    --enable-decoder=h265 \
    --enable-decoder=mpeg4 \
    --enable-decoder=h264 \
    --enable-parser=h264 \
    --enable-parser=h265
    --enabled-network \
    --enable-zlib \
    --disable-avfilter \
    --disable-avdevice \
    $ADDITIONAL_CONFIGURE_FLAG

make clean
make  -j4 install
$PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o
$PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib  -soname libffmpeg.so -nostdlib,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.8/libgcc.a
}

#arm v6
#CPU=armv6
#OPTIMIZE_CFLAGS="-marm -march=$CPU"
#PREFIX=./android/$CPU 
#ADDITIONAL_CONFIGURE_FLAG=
#build_one

#arm v7vfpv3
CPU=armv7-a
OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
PREFIX=./android/$CPU
ADDITIONAL_CONFIGURE_FLAG=
build_one

#arm v7vfp
#CPU=armv7-a
#OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU "
#PREFIX=./android/$CPU-vfp
#ADDITIONAL_CONFIGURE_FLAG=
#build_one

#arm v7n
#CPU=armv7-a
#OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=neon -marm -march=$CPU -mtune=cortex-a8"
#PREFIX=./android/$CPU 
#ADDITIONAL_CONFIGURE_FLAG=--enable-neon
#build_one

#arm v6+vfp
#CPU=armv6
#OPTIMIZE_CFLAGS="-DCMP_HAVE_VFP -mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU"
#PREFIX=./android/${CPU}_vfp 
#ADDITIONAL_CONFIGURE_FLAG=
#build_one

但不幸的是，我得到了以下错误：

    INSTALL ffmpeg
INSTALL ffprobe
INSTALL ffserver
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(eventfd.o): multiple definition of 'eventfd'
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(eventfd.o): previous definition here
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): multiple definition of '__dorand48'
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): previous definition here
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): multiple definition of '__rand48_mult'
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): previous definition here
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): multiple definition of '__rand48_add'
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): previous definition here
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): multiple definition of '__rand48_seed'
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(_rand48.o): previous definition here
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libm.a(s_scalbn.o): multiple definition of 'ldexp'
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: /usr/local/src/android-ndk-r10/platforms/android-8/arch-arm//usr/lib/libc.a(ldexp.o): previous definition here
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: cannot find -lz
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: cannot find -ldl
/usr/local/src/android-ndk-r10/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld: error: cannot find -llog
libavformat/http.c:384: error: undefined reference to 'inflateEnd'
libavformat/http.c:385: error: undefined reference to 'inflateInit2_'
libavformat/http.c:390: error: undefined reference to 'zlibCompileFlags'
libavformat/http.c:1029: error: undefined reference to 'inflateEnd'
libavformat/http.c:867: error: undefined reference to 'inflate'
libavformat/id3v2.c:840: error: undefined reference to 'uncompress'
libavformat/mov.c:2934: error: undefined reference to 'uncompress'
bionic/libc/bionic/drand48.c:24: error: undefined reference to '_rand48_seed'
bionic/libc/bionic/erand48.c:21: error: undefined reference to '_dorand48'

任何帮助都将不胜感激。谢谢!

Answer 1

在您的构建中，ld查找静态系统库(libc.a，libz.a，.)同时，它应该查找这些库的共享版本。

有一个-Bshared标志可以帮助您，但是要完全控制正在发生的事情，我建议使用以下链接步骤：

$PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib \
-soname libffmpeg.so -nostdlib,noexecstack -Bsymbolic \
--whole-archive --no-undefined \
-o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a \
libavutil/libavutil.a libswscale/libswscale.a \
$PLATFORM/usr/lib/libc.so $PLATFORM/usr/lib/libm.so \
$PLATFORM/usr/lib/libz.so \
$PLATFORM/usr/lib/libdl.so $PLATFORM/usr/lib/liblog.so \
--dynamic-linker=/system/bin/linker \
$PREBUILT/lib/gcc/arm-linux-androideabi/4.8/libgcc.a

您似乎不需要可执行文件，因此可以将其添加到./configure调用中。

--disable-ffmpeg
--disable-ffprobe
--disable-ffserver

并删除以下行：

--extra-ldflags
--extra-libs

Answer 2

这对我起了作用：

首先，建立一个独立的工具链：

android-ndk-r10/build/tools/make-standalone-toolchain.sh --platform=android-{your target here} --install-dir={pick a toolchain install directory}

然后使用您创建的独立工具链配置ffmpeg：

./configure                                                                  \
--prefix={where you want to install ffmpeg to}                               \
--cross-prefix={standalone toolchain install dir}/bin/arm-linux-androideabi- \
--target-os=linux                                                            \
--arch=arm                                                                   \
--enable-cross-compile                                                       \
--sysroot={standaline toolchain install dir}/sysroot                         \
--disable-yasm

我认为你需要让亚玛斯瘫痪，因为它对手臂不起作用。

从那里你可以只是“让安装”，它应该可以工作。