通过USB Modem和gnokii- SMS pgsql发送/接收大量短信

Question

我试图通过标准的GSM USB Modem发送和接收批量SMSs，使用gnokii-SMSs在Debain上压缩6.0.3 64位。

我遵循以下站点的说明：http://thelogbox.com/send-receive-sms-messages-usb-modem-linux/

我已经在我的机器上安装了Postgres，所以我使用了gnokii-smsd。

shalin@developer-hp:/dev$ sudo apt-get install gnokii-smsd-pgsql 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
gnokii-smsd-pgsql is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 378 not upgraded.
shalin@developer-hp:/dev$ sudo apt-get install gnokii-smsd-pgsql 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
gnokii-smsd-pgsql is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 378 not upgraded.

当我试图找到调制解调器连接的端口时，我得到的是：

shalin@developer-hp:~$ sudo lsusb 
[sudo] password for shalin: 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 0461:0010 Primax Electronics, Ltd 
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 19d2:0154 ONDA Communication S.p.A. 
Bus 001 Device 006: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 002: ID 04e8:3426 Samsung Electronics Co., Ltd SCX-4500 Laser Printer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
shalin@developer-hp:~$ 

设备是: ONDA通讯有限公司。

shalin@developer-hp:~$ sudo dmesg | grep USB
[    0.471217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.471311] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.475052] uhci_hcd: USB Universal Host Controller Interface driver
[    0.487912] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.487956] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.487960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.488073] hub 1-0:1.0: USB hub found
[    0.488148] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.488195] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.488197] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.488257] hub 2-0:1.0: USB hub found
[    0.489428] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.489495] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.489497] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.489559] hub 3-0:1.0: USB hub found
[    0.490862] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.490916] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.490918] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.490981] hub 4-0:1.0: USB hub found
[    0.491031] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.491082] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.491084] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.491141] hub 5-0:1.0: USB hub found
[    0.803706] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    0.937425] usb 1-1: New USB device found, idVendor=04e8, idProduct=3426
[    0.937431] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.268016] usb 1-7: new high speed USB device using ehci_hcd and address 6
[    1.401680] usb 1-7: New USB device found, idVendor=058f, idProduct=6366
[    1.401683] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.406441] Initializing USB Mass Storage driver...
[    1.406635] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.406703] USB Mass Storage support registered.
[    1.640040] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    1.803952] usb 4-2: New USB device found, idVendor=1a86, idProduct=7523
[    1.803957] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.803961] usb 4-2: Product: USB2.0-Ser!
[    2.044018] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    2.218546] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
[    2.218552] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.218557] usb 3-1: Product: USB OPTICAL MOUSE
[    2.524518] usb 3-2: new low speed USB device using uhci_hcd and address 3
[    2.701552] usb 3-2: New USB device found, idVendor=0461, idProduct=0010
[    2.701558] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.701562] usb 3-2: Product: USB Keyboard
[    3.125256] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3426
[    3.140601] USB Serial support registered for generic
[    3.140639] usbserial: USB Serial Driver core
[    3.163516] USB Serial support registered for ch341-uart
[    3.176282] usb 4-2: ch341-uart converter now attached to ttyUSB0
[    3.476799] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
[    3.476877] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-1/input0
[    3.491755] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
[    3.491808] generic-usb 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input0
[    3.525651] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6
[    3.525714] generic-usb 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input1
[    3.525736] usbhid: v2.6:USB HID core driver
[ 1636.760031] usb 1-5: new high speed USB device using ehci_hcd and address 7
[ 1636.893751] usb 1-5: New USB device found, idVendor=19d2, idProduct=0154
[ 1636.893756] usb 1-5: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 1636.896329] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1641.897006] scsi 5:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
shalin@developer-hp:~$ 

我应该指出，我已经有一段时间没有使用linux系统了，并且开始怀疑为什么我不知道/dev/文件夹调制解调器映射到哪个系统的主要原因是因为我使用的是较旧版本的Debian。

我按照指令创建并编辑了配置文件。文件位于这里：

/home/shalin/.config/

编辑如下：

port = /dev/tty0

和：

model = AT

最后，当我尝试使用以下方法进行测试时：

sudo gnokii --identify

gnokii甚至没有在可能的命令中列出提示符。选项卡只属于gnome，所以我甚至不认为gnokii已经安装好了。

如你所见，我不知道出了什么问题，也不知道我到底该做什么。任何帮助都将不胜感激。

你好，沙林。

Answer 1

1. 我相信你还没安装。smsd不是gnokii。只需安装gnokii，然后尝试运行gnokii --从命令行中识别
2. 此外，您还必须确保端口是您的调制解调器连接到的确切端口。当我插入我的调制解调器和做dmesg，它没有列出它，但幸运的是，我只有6个USB端口，所以我只是尝试了所有这些，直到我找到正确的一个。我的配置文件中的行是：

端口= /dev/ttyUSB3 3

最后的数目将根据端口的不同而变化。

3.http://rolfblijleven.blogspot.nl/2013/01/raspberry-pi-as-sms-gateway.html