Compiling T2600G-28TS GPL源代码编译错误

Question

我正在尝试构建t2600g-28ts交换机的u引导和内置linux，以获得用于修改设备的引导加载器，我的下一个目标是闪烁OpenWRT。这是一个基于bcm53547的董事会，我已经尝试了以下构建说明，没有运气。我认为也许工具链是问题所在，所以我如何解决这个问题。任何帮助都将不胜感激..。

T 2600-28TS GPL代码 https://static.tp-link.com/resources/gpl/t2600g-28ts_gpl_20181206.tar.gz

编译指令

1. All build targets are in "t2600g-28ts_gpl/tplink/buildroot-wolfhound2/" and "t2600g-28ts_gpl/ldk/XLDK_4.2.1/bootloader/uboot-2016.01", you should enter the directory to build components.

2. Toolchain binary is avaliable in this package. The directory is "t2600g-28ts_gpl/tplink/buildroot-wolfhound2/host/usr/bin/".

3. Building steps:
 1) put t2600g-28ts_gpl in directory /project/trunk
 2) export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:/project/trunk/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/host/usr/lib" 
 3) cd /project/trunk/t2600g-28ts_gpl/tplink/buildroot-wolfhound2
 3) make O=./build/t2600g-28ts tplink-t2600g-28ts_defconfig
 4) make O=./build/t2600g-28ts
 After step4 completed, The linux kernel image, rootfs filesystem will be found in directory "t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/images".
 
 5) cd /project/trunk/t2600g-28ts_gpl/ldk/XLDK_4.2.1/bootloader/uboot-2016.01
 6) export CROSS_COMPILE=/project/trunk/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/host/usr/bin/arm-linux-
 7) export ARCH=arm
 8) export PATH="$PATH:/project/trunk/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/host/usr/bin"
 9) make O=./build-output bcm953547k_defconfig
 10) make O=./build-output all
 After step11 completed, uboot will be found in directory "t2600g-28ts_gpl/ldk/XLDK_4.2.1/bootloader/uboot-2016.01".

我的工作

export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:~/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/host/usr/lib"
cd ~/t2600g-28ts_gpl/tplink/buildroot-wolfhound2
make O=./build/t2600g-28ts tplink-t2600g-28ts_defconfig

构建Debug

/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/sbin
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/bin
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/sbin
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib
ln -snf lib /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib32
ln -snf lib /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib32
>>> skeleton undefined Fixing libtool files
>>> skeleton undefined Installing to target
rsync -a --ignore-times  --chmod=u=rwX,go=rX --exclude .empty --exclude '*~' board/broadcom/iproc/skeleton/ /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/target/
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/target/bin
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/target/sbin
/usr/bin/install -d -m 0755 /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/target/lib
ln -snf lib /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/target/lib32
ln -snf lib /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/target/usr/lib32
/usr/bin/install -m 0644 support/misc/target-dir-warning.txt /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
>>> toolchain-external undefined Extracting
>>> toolchain-external undefined Patching
>>> toolchain-external undefined Configuring
Cannot execute cross-compiler '/home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/host/usr/bin/arm-linux-gcc.br_real'
make[1]: *** [package/pkg-generic.mk:189: /home/topcu/t2600g-28ts_gpl/tplink/buildroot-wolfhound2/build/t2600g-28ts/build/toolchain-external-undefined/.stamp_configured] Error 1
make: *** [Makefile:36: _all] Error 2

Answer 1

我也有同样的问题。我设法通过在CentOS 6.10上编译来解决这个问题，但是我必须首先安装GCC和一些python依赖项。现在我正试着上传EVE-NG的图像