LCD ESP8266WiFi接入点发送文本

Question

你好，我正试图将数据发送到液晶屏幕上，但它们以GET/ DATO /HTTP 1.1的形式到达

我只需要到达数据并删除(GET/ /HTTP 1.1)

我已经习惯了无线网络( wifi )在接入点模式下的esp8266程序。

请求是到达arduino终端的数据。

  }
 if (request.indexOf("") != -1)  { //////SHIPPING PART
  // enviar
  lcd.init();
   lcd.backlight();
   lcd.setCursor(0,0);
   lcd.print(request);

    delay(1000);
 
   }

发送文本

我只想发短信，所以这就是我希望看到的

派达图

删除GET/ /HTTP 1.1

#include <ESP8266WiFi.h>
#include <Wire.h> 
#include <LiquidCrystal_I2C.h>



   
const char *ssid_AP = "LCDAP";
const char *Password_AP = "12345678";

WiFiServer server(80);

LiquidCrystal_I2C lcd(0x27,2,16); 

void setup(){
  lcd.init();                      // initialize the lcd 
  lcd.backlight();
  lcd.setCursor(2,0);
  lcd.print("LCD Ready");
  Serial.begin(115200);
  delay(10);


  delay(1000);
  WiFi.mode(WIFI_AP);
  WiFi.softAP(ssid_AP,Password_AP);

  Serial.println("WiFi conected");
  Serial.println();
  WiFi.printDiag(Serial);
  Serial.print("AP direccion IP: ");
  Serial.println(WiFi.softAPIP());

  // Start the server
  server.begin();
  Serial.println("Server started");
  
  }

void loop() {
  // Check if a client has connected
  WiFiClient client = server.available();
  if (!client) {
    return;
  }
 
  // Wait until the client sends some data
  Serial.println("new client");
  while(!client.available()){
    delay(1);
  }
 
  // Read the first line of the\r %d\n
  String request = client.readStringUntil('\n');
  Serial.println(request);
  client.flush();

 

if (request.indexOf("/LCDBORRAR") != -1)  {
   lcd.clear();
    delay(1000);
 
  }
 if (request.indexOf("") != -1)  { ////// send text
  // enviar
  lcd.init();
   lcd.backlight();
   lcd.setCursor(0,0);
   lcd.print(request);

    delay(1000);
 
   }
 
 
  delay(1);
  Serial.println("Client disonnected");
  Serial.println("");

   }

Answer 1

req.replace(“HTTP1.1”、"")；// Para等量HTTP/1.1 req.replace("GET /“、"")；// Para等量GET /