blocks|key|4847171|text|如果您使用自制软件安装了Node.js，则可以在/usr/local/share/npm/bin中找到npm二进制文件。您应该确保此目录在您的PATH环境变量中。因此，在您的~/.zshrc文件中添加export+PATH=/usr/local/share/npm/bin:$PATH。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4847172|entityMap^0|O|O|2F|8|2S|16|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

If you installed Node.js using Homebrew, npm binaries can be found in <code>/usr/local/share/npm/bin</code>. You should make sure this directory is in your PATH environment variable. So, in your <code>~/.zshrc</code> file add <code>export PATH=/usr/local/share/npm/bin:$PATH</code>.

blocks|key|2723877|text|在~/.zshrc的开头添加source+/home/YOUUSERNAME/.bash_profile|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2723878|并且将检测到所有丢失的命令。|2723879|对于Mac用户:添加source+/Users/YOUUSERNAME/.bash_profile|BOLD|2723880|entityMap^0|1|8|E|12|0|0|2|3|A|13|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]|$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|R|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|S|8|@$9|T|A|U|B|J]|$9|V|A|W|B|C]]|D|@]|E|$]]|$1|K|3|-4|5|6|7|X|8|@]|D|@]|E|$]]]|L|$]]

add <code>source /home/YOUUSERNAME/.bash_profile</code> at the beginning of <code>~/.zshrc</code>

And all missing commands will be detected. 

For Mac users : add <code>source /Users/YOUUSERNAME/.bash_profile</code>

blocks|key|4934661|text|如果您是使用nvm添加的，请将以下内容添加到您的.zshrc文件中并重新启动终端，因为zsh+shell不会检测到该文件的二进制文件，因此我们指定路径|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4934662|export+NVM_DIR="$([+-z+"${XDG_CONFIG_HOME-}"+]+&&+printf+%25s+"${HOME}/.nvm"+%7C%7C+printf+%25s+"${XDG_CONFIG_HOME}/nvm")"
[+-s+"$NVM_DIR/nvm.sh"+]+&&+\.+"$NVM_DIR/nvm.sh"+#+This+loads+nvm|code-block|syntax|javascript|4934663|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

If you have added using nvm please add the following to your .zshrc file and restart the terminal since the binaries of the file are not being detected by zsh shell we specify the path

<pre><code>export NVM_DIR="$([ -z "${XDG_CONFIG_HOME-}" ] &amp;&amp; printf %s "${HOME}/.nvm" || printf %s "${XDG_CONFIG_HOME}/nvm")"
[ -s "$NVM_DIR/nvm.sh" ] &amp;&amp; \. "$NVM_DIR/nvm.sh" # This loads nvm
</code></pre>

blocks|key|4934486|text|对于Mac用户：|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|4934487|以及:+nvm、iterm2、zsh|4934488|我发现使用.bashrc而不是.profile或.bash_profile导致的问题要少得多。|CODE|4934489|只需将后者添加到我的.zshrc文件中：|4934490|source+$HOME/.bashrc|code-block|syntax|javascript|4934491|entityMap^0|2|3|0|0|5|7|F|8|O|D|0|A|6|0|0^^$0|@$1|2|3|4|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|W|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|X|8|@$9|Y|A|Z|B|J]|$9|10|A|11|B|J]|$9|12|A|13|B|J]]|D|@]|E|$]]|$1|K|3|L|5|6|7|14|8|@$9|15|A|16|B|J]]|D|@]|E|$]]|$1|M|3|N|5|O|7|17|8|@]|D|@]|E|$P|Q]]|$1|R|3|-4|5|6|7|18|8|@]|D|@]|E|$]]]|S|$]]

For Mac users:

Alongside the following:
nvm, iterm2, zsh

I found using the <code>.bashrc</code> rather than <code>.profile</code> or <code>.bash_profile</code> caused far less issues. 

Simply by adding the latter to my <code>.zshrc</code> file:

<pre><code>source $HOME/.bashrc
</code></pre>

blocks|key|4934566|text|仅限Mac用户使用|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|4934567|假设您之前安装了nvm，并且npm正确|4934568|(有关如何安装它的详细信息，请参阅以下分步指南：|4934569|install+nvm+for+Mac+users+)。|4934570|您需要：|4934571|找到'.zshrc‘文件：|4934572|directory.|4934573|Press+|unordered-list-item|4934574|
|4934575|开放终端。|4934576|4934577|键入open+~访问您的家庭Finder.|CODE|4934578|4934579|Locate+.zshrc.|4934580|
中的隐藏文件|4934581|+Cmd+%2B+Shift+%2B+.|4934582|4934583|编辑'.zshrc‘文件：|4934584|4934585|将：source+/Users/_user_Name_/.bash_profile添加到文件的顶部(其中_user_Name_代表您的用户。|4934586|保存文件，并关闭终端窗口。|4934587|4934588|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/24585261/nvm-keeps-forgetting-node-in-new-terminal-session/57024034#57024034^0|2|7|0|0|0|0|P|0|0|0|0|D|0|0|0|0|0|0|2|6|0|0|7|6|0|0|1|F|0|0|0|D|0|0|2|13|0|0|0^^$0|@$1|2|3|4|5|6|7|1Q|8|@$9|1R|A|1S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|1T|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|1U|8|@]|D|@]|E|$]]|$1|J|3|K|5|6|7|1V|8|@]|D|@$9|1W|A|1X|1|1Y]]|E|$]]|$1|L|3|M|5|6|7|1Z|8|@]|D|@]|E|$]]|$1|N|3|O|5|6|7|20|8|@$9|21|A|22|B|C]]|D|@]|E|$]]|$1|P|3|Q|5|6|7|23|8|@]|D|@]|E|$]]|$1|R|3|S|5|T|7|24|8|@]|D|@]|E|$]]|$1|U|3|V|5|6|7|25|8|@]|D|@]|E|$]]|$1|W|3|X|5|T|7|26|8|@]|D|@]|E|$]]|$1|Y|3|V|5|6|7|27|8|@]|D|@]|E|$]]|$1|Z|3|10|5|T|7|28|8|@$9|29|A|2A|B|11]]|D|@]|E|$]]|$1|12|3|V|5|6|7|2B|8|@]|D|@]|E|$]]|$1|13|3|14|5|T|7|2C|8|@$9|2D|A|2E|B|C]]|D|@]|E|$]]|$1|15|3|16|5|6|7|2F|8|@]|D|@]|E|$]]|$1|17|3|18|5|T|7|2G|8|@$9|2H|A|2I|B|11]]|D|@]|E|$]]|$1|19|3|-4|5|6|7|2J|8|@]|D|@]|E|$]]|$1|1A|3|1B|5|6|7|2K|8|@$9|2L|A|2M|B|C]]|D|@]|E|$]]|$1|1C|3|-4|5|6|7|2N|8|@]|D|@]|E|$]]|$1|1D|3|1E|5|T|7|2O|8|@$9|2P|A|2Q|B|11]]|D|@]|E|$]]|$1|1F|3|1G|5|T|7|2R|8|@]|D|@]|E|$]]|$1|1H|3|-4|5|6|7|2S|8|@]|D|@]|E|$]]|$1|1I|3|-4|5|6|7|2T|8|@]|D|@]|E|$]]]|1J|$1K|$5|1L|1M|1N|E|$1O|1P]]]]

Mac users only 
assuming you installed nvm prior, and npm correctly 
(step-by-step guide below on how to install it: 
<a href="https://stackoverflow.com/questions/24585261/nvm-keeps-forgetting-node-in-new-terminal-session/57024034#57024034">install nvm for Mac users</a>
). 

you need to:

Find the '.zshrc' file:

<ul>
<li>Open Terminal.</li>
<li>Type <code>open ~</code> to access your home directory.</li>
<li>Press <code>Cmd + Shift + .</code> to show the hidden files in Finder.</li>
<li>Locate the .zshrc.</li>
</ul>

Edit the '.zshrc' file:

<ul>
<li>add: <code>source /Users/_user_Name_/.bash_profile</code> to the top of the file (where _user_Name_ stands for your user.</li>
<li>Save the file, and close the Terminal window. </li>
</ul>

blocks|key|4847317|text|在Ubuntu上，安装ZSH后，在bash终端上预先安装Node或其他软件包。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|CODE|entityRanges|data|4847318|4847319|首次打开：|blockquote|4847320|4847321|4847322|nano+.zshrc|4847323|4847324|并取消注释第二行：|4847325|4847326|4847327|export+PATH=$HOME/bin:/usr/local/bin:$PATH|4847328|这对我来说很有效，而且不需要写任何代码，我认为这个选项在Mac上也是可用的。|4847329|entityMap^0|1|6|H|4|0|0|0|0|0|0|B|0|0|0|0|0|0|16|0|S|3|0^^$0|@$1|2|3|4|5|6|7|Z|8|@$9|10|A|11|B|C]|$9|12|A|13|B|D]]|E|@]|F|$]]|$1|G|3|-4|5|6|7|14|8|@]|E|@]|F|$]]|$1|H|3|I|5|J|7|15|8|@]|E|@]|F|$]]|$1|K|3|-4|5|6|7|16|8|@]|E|@]|F|$]]|$1|L|3|-4|5|6|7|17|8|@]|E|@]|F|$]]|$1|M|3|N|5|6|7|18|8|@$9|19|A|1A|B|D]]|E|@]|F|$]]|$1|O|3|-4|5|6|7|1B|8|@]|E|@]|F|$]]|$1|P|3|Q|5|J|7|1C|8|@]|E|@]|F|$]]|$1|R|3|-4|5|6|7|1D|8|@]|E|@]|F|$]]|$1|S|3|-4|5|6|7|1E|8|@]|E|@]|F|$]]|$1|T|3|U|5|6|7|1F|8|@$9|1G|A|1H|B|D]]|E|@]|F|$]]|$1|V|3|W|5|6|7|1I|8|@$9|1J|A|1K|B|C]]|E|@]|F|$]]|$1|X|3|-4|5|6|7|1L|8|@]|E|@]|F|$]]]|Y|$]]

On Ubuntu, after installing ZSH, and prevously on the <code>bash</code> terminal installed Node or other packages,

<blockquote>
 First open:
</blockquote>

<code>nano .zshrc</code>

<blockquote>
 And uncomment the second line:
</blockquote>

<code>export PATH=$HOME/bin:/usr/local/bin:$PATH</code>

This works for me, and without writting any line, and I think this option is available on Mac too.

blocks|key|2723916|text|对于macOS用户:请考虑使用.profile+而不是。您可能仍需要手动将其添加到~/.zshrc|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|CODE|entityRanges|data|2723917|source+$HOME/.profile|code-block|syntax|javascript|2723918|请注意，默认情况下没有这样的文件！引用slhck+https://superuser.com/a/473103|2723919|2723920|不管怎样，如果文件不存在，你可以简单地创建它，并在文本编辑器中打开它。|blockquote|2723921|2723922|触摸~/.profile打开-e+!$|2723923|2723924|附加的价值在于，不管使用的是哪种shell，使用单个文件来设置环境的感觉都很好。在zsh中加载bash配置文件感觉很笨拙。|2723925|引用Cos+https://stackoverflow.com/a/415444/2445063接受的答案|2723926|2723927|+.profile只是最初由/bin/sh使用的登录脚本文件名。bash通常与/bin/sh向后兼容，如果存在的话，它将读取.profile|2723928|2723929|2723930|遵循菲利普·埃克伯格的研究/观点https://stackoverflow.com/a/415410/2445063|2723931|对于根目录，|2723932|+.profile相当于.bash_profile。我认为更改名称是为了让其他shell+(csh、sh、tcsh)也能使用它。(作为用户，您不需要)|2723933|2723934|2723935|回到slhck，关于bash的注意事项|2723936|2723937|+(…)一旦您创建了一个名为~/.bash_profile的文件，您的~/.profile将不再被读取。|2723938|2723939|entityMap|0|LINK|mutability|MUTABLE|url|https://superuser.com/a/473103|1|https://stackoverflow.com/a/415444/2445063|2|https://stackoverflow.com/a/415410/2445063^0|2|5|O|3|F|8|15|8|0|0|0|H|P|U|0|0|0|0|0|0|0|0|6|16|1|0|0|1|8|E|7|13|7|1Q|8|0|0|0|G|16|2|0|0|1|8|C|D|0|0|0|F|4|0|0|0|1G|E|F|Z|A|0|0^^$0|@$1|2|3|4|5|6|7|1U|8|@$9|1V|A|1W|B|C]|$9|1X|A|1Y|B|C]|$9|1Z|A|20|B|D]|$9|21|A|22|B|D]]|E|@]|F|$]]|$1|G|3|H|5|I|7|23|8|@]|E|@]|F|$J|K]]|$1|L|3|M|5|6|7|24|8|@$9|25|A|26|B|C]]|E|@$9|27|A|28|1|29]]|F|$]]|$1|N|3|-4|5|6|7|2A|8|@]|E|@]|F|$]]|$1|O|3|P|5|Q|7|2B|8|@]|E|@]|F|$]]|$1|R|3|-4|5|6|7|2C|8|@]|E|@]|F|$]]|$1|S|3|T|5|6|7|2D|8|@]|E|@]|F|$]]|$1|U|3|-4|5|6|7|2E|8|@]|E|@]|F|$]]|$1|V|3|W|5|6|7|2F|8|@]|E|@]|F|$]]|$1|X|3|Y|5|6|7|2G|8|@]|E|@$9|2H|A|2I|1|2J]]|F|$]]|$1|Z|3|-4|5|6|7|2K|8|@]|E|@]|F|$]]|$1|10|3|11|5|Q|7|2L|8|@$9|2M|A|2N|B|D]|$9|2O|A|2P|B|D]|$9|2Q|A|2R|B|D]|$9|2S|A|2T|B|D]]|E|@]|F|$]]|$1|12|3|-4|5|6|7|2U|8|@]|E|@]|F|$]]|$1|13|3|-4|5|6|7|2V|8|@]|E|@]|F|$]]|$1|14|3|15|5|6|7|2W|8|@]|E|@$9|2X|A|2Y|1|2Z]]|F|$]]|$1|16|3|17|5|6|7|30|8|@]|E|@]|F|$]]|$1|18|3|19|5|Q|7|31|8|@$9|32|A|33|B|D]|$9|34|A|35|B|D]]|E|@]|F|$]]|$1|1A|3|-4|5|6|7|36|8|@]|E|@]|F|$]]|$1|1B|3|-4|5|6|7|37|8|@]|E|@]|F|$]]|$1|1C|3|1D|5|6|7|38|8|@$9|39|A|3A|B|C]]|E|@]|F|$]]|$1|1E|3|-4|5|6|7|3B|8|@]|E|@]|F|$]]|$1|1F|3|1G|5|Q|7|3C|8|@$9|3D|A|3E|B|C]|$9|3F|A|3G|B|D]|$9|3H|A|3I|B|D]]|E|@]|F|$]]|$1|1H|3|-4|5|6|7|3J|8|@]|E|@]|F|$]]|$1|1I|3|-4|5|6|7|3K|8|@]|E|@]|F|$]]]|1J|$1K|$5|1L|1M|1N|F|$1O|1P]]|1Q|$5|1L|1M|1N|F|$1O|1R]]|1S|$5|1L|1M|1N|F|$1O|1T]]]]

for macOS users: consider using <code>.profile</code> instead of <code>.bash_profile</code>. You may still need to manually add it to <code>~/.zshrc</code>:
<pre><code>source $HOME/.profile
</code></pre>
Note that there is no such file by default! Quoting slhck <a href="https://superuser.com/a/473103">https://superuser.com/a/473103</a>:
<blockquote>
Anyway, you can simply create the file if it doesn't exist and open it in a text editor.
<pre><code>touch ~/.profile
open -e !$
</code></pre>
</blockquote>
The added value is that it feels good man to use a single file to set up the environment, regardless of the shell used. Loading a bash config file in zsh felt awkward.
Quoting an accepted answer by Cos <a href="https://stackoverflow.com/a/415444/2445063">https://stackoverflow.com/a/415444/2445063</a>
<blockquote>
<code>.profile</code> is simply the login script filename originally used by <code>/bin/sh</code>. bash, being generally backwards-compatible with <code>/bin/sh</code>, will read <code>.profile</code> if one exists
</blockquote>
Following Filip Ekberg's research / opinion <a href="https://stackoverflow.com/a/415410/2445063">https://stackoverflow.com/a/415410/2445063</a>
<blockquote>
<code>.profile</code> is the equivalent of <code>.bash_profile</code> for the root. I think the name is changed to let other shells (csh, sh, tcsh) use it as well. (you don't need one as a user)
</blockquote>
getting back to slhck, a note of attention regarding bash:
<blockquote>
(…) once you create a file called <code>~/.bash_profile</code>, your <code>~/.profile</code> will not be read anymore.
</blockquote>

blocks|key|2723952|text|我要尝试的另一件事是取消对~/.zshrc中的第一个export的注释|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2723953|#+If+you+come+from+bash+you+might+have+to+change+your+$PATH.
export+PATH=$HOME/bin:/usr/local/bin:$PATH|code-block|syntax|javascript|2723954|entityMap^0|D|8|Q|6|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]|$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|R|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|S|8|@]|D|@]|E|$]]]|L|$]]

Another thing to try and the answer for me was to uncomment the first <code>export</code> in <code>~/.zshrc</code>:
<pre><code># If you come from bash you might have to change your $PATH.
export PATH=$HOME/bin:/usr/local/bin:$PATH
</code></pre>

blocks|key|2724256|text|我用brew+upgrade+node解决了这个问题|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2724257|entityMap^0|2|H|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

I solved this by <code>brew upgrade node</code>

blocks|key|3205245|text|以我的浅见，首先，你必须确保你安装了任何类型的Node版本。对于该类型：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3205246|nvm+ls|code-block|syntax|javascript|3205247|如果你没有得到任何版本，这意味着我是对的:)然后你必须输入：|3205248|nvm+install+<node_version**>|3205249|**您可以在Node+website中找到的实际版本|offset|length|3205250|然后您将拥有Node，并且您将能够使用npm命令|style|BOLD|3205251|entityMap|0|LINK|mutability|MUTABLE|url|https://nodejs.org/en/^0|0|0|0|0|6|C|0|0|J|5|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|11|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|12|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|13|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|14|8|@]|9|@$M|15|N|16|1|17]]|A|$]]|$1|O|3|P|5|6|7|18|8|@$M|19|N|1A|Q|R]]|9|@]|A|$]]|$1|S|3|-4|5|6|7|1B|8|@]|9|@]|A|$]]]|T|$U|$5|V|W|X|A|$Y|Z]]]]

In my humble opinion, first, you have to make sure you have any kind of Node version installed. For that type:

<pre><code>nvm ls
</code></pre>

And if you don't get any versions it means I was right :) Then you have to type:

<pre><code>nvm install &lt;node_version**&gt;
</code></pre>

** the actual version you can find in <a href="https://nodejs.org/en/" rel="noreferrer">Node website</a>

Then you will have Node and you will be able to use npm commands

blocks|key|2724624|text|转到终端并运行：nano+.zshrc|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2724625|注意:如果您没有这个目录，可以使用mkdir命令创建它：mkdir+~/.zshrc|2724626|将以下内容粘贴到包含"export+ZSH“的行下的任何位置：|2724627|export+NVM_DIR="$([+-z+"${XDG_CONFIG_HOME-}"+]+&&+printf+%25s+"${HOME}/.nvm"+%7C%7C+printf+%25s+"${XDG_CONFIG_HOME}/nvm")"
[+-s+"$NVM_DIR/nvm.sh"+]+&&+\.+"$NVM_DIR/nvm.sh"+#+This+loads+nvm|code-block|syntax|javascript|2724628|现在只需点击%5EX，系统将询问您是否要保存。说‘是’，然后按回车，然后再次按回车，如果它说你正在更改一个文件。您可能需要在保存后重新启动终端。|2724629|如果您以前安装过node，请尝试使用node+-v作为快速测试。|2724630|entityMap^0|8|B|0|S|E|0|0|0|0|I|7|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|X|8|@$9|Y|A|Z|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|10|8|@]|D|@]|E|$]]|$1|J|3|K|5|L|7|11|8|@]|D|@]|E|$M|N]]|$1|O|3|P|5|6|7|12|8|@]|D|@]|E|$]]|$1|Q|3|R|5|6|7|13|8|@$9|14|A|15|B|C]]|D|@]|E|$]]|$1|S|3|-4|5|6|7|16|8|@]|D|@]|E|$]]]|T|$]]

Go to your terminal and run: nano .zshrc
NOTE: If you don't have this directory, you can create it using mkdir command:
mkdir ~/.zshrc
Paste the following anywhere below the line containing &quot;export ZSH&quot;:
<pre><code>export NVM_DIR=&quot;$([ -z &quot;${XDG_CONFIG_HOME-}&quot; ] &amp;&amp; printf %s &quot;${HOME}/.nvm&quot; || printf %s &quot;${XDG_CONFIG_HOME}/nvm&quot;)&quot;
[ -s &quot;$NVM_DIR/nvm.sh&quot; ] &amp;&amp; \. &quot;$NVM_DIR/nvm.sh&quot; # This loads nvm
</code></pre>
Now simply hit ^X and you will be asked if you would like to save. Say 'yes' and hit return, then hit return again if it says you are changing a file. You may need to restart your terminal after saving.
Try using node -v as a quick test if you've installed node before.

blocks|key|2724239|text|对于任何仍然有问题的人来说。别忘了注销并重新登录。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2724240|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

For anyone who is still having problem. Don't forget to logout and login again.

blocks|key|2724132|text|对我来说，将export+PATH=/usr/local/share/npm/bin:$PATH添加到.zshrc的公认答案是不起作用的。我也尝试添加了NVM_DIR，这解决了我的问题。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2724133|2724134|Try+vi+.bashrc|ordered-list-item|2724135|You将找到类似以下内容的行。复印一下。|2724136|2724137|将复制的内容重新启动到.zshrc文件|2724138|unordered-list-item|2724139|
|2724140|2724141|2724142|我希望这能解决你的问题。|2724143|entityMap^0|6|16|1F|6|24|7|0|0|4|A|0|0|0|B|6|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@$9|Z|A|10|B|C]|$9|11|A|12|B|C]|$9|13|A|14|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|15|8|@]|D|@]|E|$]]|$1|G|3|H|5|I|7|16|8|@$9|17|A|18|B|C]]|D|@]|E|$]]|$1|J|3|K|5|I|7|19|8|@]|D|@]|E|$]]|$1|L|3|-4|5|6|7|1A|8|@]|D|@]|E|$]]|$1|M|3|N|5|6|7|1B|8|@$9|1C|A|1D|B|C]]|D|@]|E|$]]|$1|O|3|-4|5|P|7|1E|8|@]|D|@]|E|$]]|$1|Q|3|R|5|6|7|1F|8|@]|D|@]|E|$]]|$1|S|3|-4|5|P|7|1G|8|@]|D|@]|E|$]]|$1|T|3|-4|5|6|7|1H|8|@]|D|@]|E|$]]|$1|U|3|V|5|6|7|1I|8|@]|D|@]|E|$]]|$1|W|3|-4|5|6|7|1J|8|@]|D|@]|E|$]]]|X|$]]

For me the accepted answer for adding <code>export PATH=/usr/local/share/npm/bin:$PATH</code> to <code>.zshrc</code> didn't work. I tried adding the <code>NVM_DIR</code> as well which solved my issue.

<ol>
<li>Try <code>vi .bashrc</code></li>
<li>You will find a line like the following. Copy it.

<code>export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] &amp;&amp; \. "$NVM_DIR/nvm.sh" # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] &amp;&amp; \. "$NVM_DIR/bash_completion" # This loads nvm bash_completion</code></li>
<li>Paste the copied content to <code>.zshrc</code> file</li>
<li>Restart the terminal</li>
</ol>

I hope this solves your issue.

blocks|key|2724444|text|在我的例子中，重新安装node解决了这个问题。任何人都可以通过以下网站安装node：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2724445|2724446|+https://nodejs.org/en/download/|blockquote|offset|length|2724447|2724448|entityMap|0|LINK|mutability|MUTABLE|url|https://nodejs.org/en/download/^0|0|0|1|V|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|R|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|S|8|@]|9|@$F|T|G|U|1|V]]|A|$]]|$1|H|3|-4|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|X|8|@]|9|@]|A|$]]]|J|$K|$5|L|M|N|A|$O|P]]]]

In my case, reinstalling node solved the issue. Anyone can install node via below website:
<blockquote>
<a href="https://nodejs.org/en/download/" rel="nofollow noreferrer">https://nodejs.org/en/download/</a>
</blockquote>

blocks|key|4934981|text|我在安装Vercel+CLI时遇到了同样的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4934982|在我的例子中，使用sudo安装。|offset|length|style|CODE|4934983|示例：sudo+npm+i+-g+vercel|4934984|entityMap^0|0|9|4|0|3|K|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@$D|Q|E|R|F|G]]|9|@]|A|$]]|$1|J|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|K|$]]

I had the same problem while installing Vercel CLI.
In my case, install with <code>sudo</code>.
example: <code>sudo npm i -g vercel</code>

blocks|key|3205817|text|它在zsh中对我有效。试试nvm+install+--latest-npm|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|3205818|entityMap^0|D|O|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

It works for me in zsh. Try <code>nvm install --latest-npm</code>

blocks|key|4847414|text|在我的例子中，我使用NVM安装了node，在安装z+Shell之后，node和nvm命令不起作用。因此，对我有效的方法是使用以下命令再次安装nvm：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4847415|wget+https://raw.githubusercontent.com/creationix/nvm/master/install.sh+%7C+bash
sudo+zsh+install.sh|code-block|syntax|javascript|4847416|上面的命令再次安装了nvm，因为node已经安装好了，它自动在.zshrc文件中添加了节点路径，一切都正常。|4847417|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

In my case, i installed node with NVM and after installing z Shell, node and nvm command didn't worked. So what worked for me was installing nvm again with this command : 

<pre><code>wget https://raw.githubusercontent.com/creationix/nvm/master/install.sh | bash
sudo zsh install.sh
</code></pre>

Above commands installed nvm again, since node was already installed, it added the node path automatically in .zshrc file and everything worked.

blocks|key|4847620|text|对于MAC:我尝试了上面的一些方法，但都没有用，什么都不能工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4847621|我确实安装了BREW，所以尽管这不是最好的方法，但使用zsh时，我安装了：|4847622|4847623|sudo+chown+access)|ordered-list-item|offset|length|style|BOLD|4847624|brew+$()/usr/local/share/man/MAN8|4847625|sudo(对于brew+access)|4847626|brew更新&&+brew安装npm+(我已经让node+access)|4847627|brew确认了|4847628|sudo+~/.zshrc+(清空文件更改并保存)|4847629|4847630|4847631|4847632|这对我很有效。希望这对某些人有帮助。#1困扰着我，但我会暂时接受。|4847633|entityMap^0|0|0|0|0|I|0|0|X|1|0|J|1|0|10|1|0|7|2|0|P|2|1|0|0|0|X|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|13|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|14|8|@]|9|@]|A|$]]|$1|E|3|F|5|G|7|15|8|@$H|16|I|17|J|K]]|9|@]|A|$]]|$1|L|3|M|5|G|7|18|8|@$H|19|I|1A|J|K]]|9|@]|A|$]]|$1|N|3|O|5|G|7|1B|8|@$H|1C|I|1D|J|K]]|9|@]|A|$]]|$1|P|3|Q|5|G|7|1E|8|@$H|1F|I|1G|J|K]]|9|@]|A|$]]|$1|R|3|S|5|G|7|1H|8|@$H|1I|I|1J|J|K]]|9|@]|A|$]]|$1|T|3|U|5|G|7|1K|8|@$H|1L|I|1M|J|K]]|9|@]|A|$]]|$1|V|3|-4|5|6|7|1N|8|@]|9|@]|A|$]]|$1|W|3|-4|5|6|7|1O|8|@]|9|@]|A|$]]|$1|X|3|-4|5|6|7|1P|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|1Q|8|@$H|1R|I|1S|J|K]]|9|@]|A|$]]|$1|10|3|-4|5|6|7|1T|8|@]|9|@]|A|$]]]|11|$]]

FOR MAC: I tried some of the above but to no avail, could not get anything to work.
I did have BREW INSTALLED, so although this not be the best approach, with zsh, I did:
<ol>
<li>sudo chown -R $(whoami) /usr/local/share/man/man8 (for brew access)</li>
<li>brew update &amp;&amp; brew install npm (I had had node installed)</li>
<li>npm -v (to confirm install)</li>
<li>nano ~/.zshrc (to empty file changes and save)</li>
</ol>
This worked for me. Hope this helps someone. #1 bothers me, but I will live with for now.

blocks|key|2724689|text|在我的终端上写这篇文章就解决了这个问题。请注意，我必须在我的项目文件夹中单独编写它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2724690|export+PATH="$HOME/.npm-packages/bin:$PATH"
export+PATH="$HOME/.node/bin:$PATH"|code-block|syntax|javascript|2724691|来源：https://cloudlinuxtech.com/npm-command-not-found-fix/|offset|length|2724692|entityMap|0|LINK|mutability|MUTABLE|url|https://cloudlinuxtech.com/npm-command-not-found-fix/^0|0|0|3|1H|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@$I|V|J|W|1|X]]|A|$]]|$1|K|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

Just writing this in my terminal fixed the issue. Note that I had to write it separately in my project folder.
<pre><code>export PATH=&quot;$HOME/.npm-packages/bin:$PATH&quot;
export PATH=&quot;$HOME/.node/bin:$PATH&quot;
</code></pre>
Source: <a href="https://cloudlinuxtech.com/npm-command-not-found-fix/" rel="nofollow noreferrer">https://cloudlinuxtech.com/npm-command-not-found-fix/</a>

blocks|key|2724725|text|有时，简单的事情会起作用。卸载节点并重新安装对我来说是可行的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2724726|brew+uninstall+node
brew+install+node
npm+update|code-block|syntax|javascript|2724727|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Sometimes simple things work. Uninstalling node and installing again worked for me.
<pre><code>brew uninstall node
brew install node
npm update
</code></pre>

blocks|key|2723859|text|我认为问题更多的是关于ZSH的完成。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2723860|您需要在.zshrc中添加以下行：|2723861|zstyle+':completion:*'+rehash+true|code-block|syntax|javascript|2723862|如果你有一个哦-my-zsh，你已经创建了一个PR，你可以集成它直到它被拉出来：https://github.com/robbyrussell/oh-my-zsh/issues/3440|offset|length|2723863|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/robbyrussell/oh-my-zsh/issues/3440^0|0|0|0|14|1H|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|W|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|X|8|@]|9|@$K|Y|L|Z|1|10]]|A|$]]|$1|M|3|-4|5|6|7|11|8|@]|9|@]|A|$]]]|N|$O|$5|P|Q|R|A|$S|T]]]]

I think the problem is more about the ZSH completion.

You need to add this line in your .zshrc:

<pre><code>zstyle ':completion:*' rehash true
</code></pre>

If you have Oh-my-zsh, a PR has been made, you can integrate it until it is pulled: <a href="https://github.com/robbyrussell/oh-my-zsh/issues/3440" rel="nofollow">https://github.com/robbyrussell/oh-my-zsh/issues/3440</a>

blocks|key|4847765|text|在/$HOME/.npm-global/bin中使用Mac+Catalina上的Node+v12%2B时，全局依赖项会显示出来|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4847766|添加|4847767|export+PATH="$HOME/.npm-global/bin:$PATH"|code-block|syntax|javascript|4847768|添加到~/.bash_profile以将所有内容保存在一个位置，然后添加|4847769|source+$HOME/.bash_profile|4847770|添加到~/.zshrc，如果还没有这样做的话就可以了。不需要注销再重新登录，只需重启终端即可。|4847771|entityMap^0|1|M|0|0|0|3|F|0|0|Q|0|3|8|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|X|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|Y|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|Z|8|@$9|10|A|11|B|C]]|D|@]|E|$]]|$1|O|3|P|5|6|7|12|8|@$9|13|A|14|B|C]]|D|@]|E|$]]|$1|Q|3|R|5|6|7|15|8|@$9|16|A|17|B|C]]|D|@]|E|$]]|$1|S|3|-4|5|6|7|18|8|@]|D|@]|E|$]]]|T|$]]

Using Node v12+ on Mac Catalina, global dependencies are showing up in <code>/$HOME/.npm-global/bin</code>
Adding
<pre><code>export PATH=&quot;$HOME/.npm-global/bin:$PATH&quot;
</code></pre>
To <code>~/.bash_profile</code> to keep everything in one place, and then adding
<code>source $HOME/.bash_profile</code>
To <code>~/.zshrc</code> if it's not already there will do the trick. No need to logout and back in, just restart terminal.

blocks|key|2724562|text|适用于OSX+Catalina用户|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2724563|brew+install+node@14|code-block|syntax|javascript|2724564|我使用节点14，因为angular不支持最新版本(不知道为什么)..然后|2724565|echo+'export+PATH="/usr/local/opt/node@14/bin:$PATH"'+>>+~/.zshrc|2724566|entityMap^0|3|3|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|T|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|O|3|-4|5|6|7|W|8|@]|D|@]|E|$]]]|P|$]]

For OSX Catalina users
<pre><code>brew install node@14
</code></pre>
I'm using node 14 cause angular won't support latest version (Don't know why)..
Then
<pre><code>echo 'export PATH=&quot;/usr/local/opt/node@14/bin:$PATH&quot;' &gt;&gt; ~/.zshrc
</code></pre>

I'm having some problems installing <a href="http://vowsjs.org">vows</a> via npm in zsh. Here's what I get. I tried installing it with and without the -g option. Do you have any idea what's wrong here?

<pre><code>[❤ ~/Desktop/sauce-node-demo:master] npm install -g vows
npm http GET https://registry.npmjs.org/vows
npm http 304 https://registry.npmjs.org/vows
npm http GET https://registry.npmjs.org/eyes
npm http GET https://registry.npmjs.org/diff
npm http 304 https://registry.npmjs.org/eyes
npm http 304 https://registry.npmjs.org/diff
/usr/local/share/npm/bin/vows -&gt; /usr/local/share/npm/lib/node_modules/vows/bin/vows
vows@0.6.4 /usr/local/share/npm/lib/node_modules/vows
├── eyes@0.1.8
└── diff@1.0.3
[❤ ~/Desktop/sauce-node-demo:master] vows
zsh: command not found: vows
</code></pre>

Thanks

Command not found after npm install in zsh

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云AI代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

功能1上新10个字符

功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符。

功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符。

功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符

功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符

功能4上新

文章&问答评论现已支持表情

全新交互，全新视觉，新增快捷键、悬浮工具栏、高亮块等功能并同时优化现有功能，全面提升创作效率和体验

社区富文本编辑器全新改版！诚邀体验～ 

精选全网热门MCP server，让你的AI更好用 🚀

💥开发者 MCP广场重磅上线！

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

我在zsh中通过npm安装时遇到了一些问题。这就是我所得到的。我尝试使用和不使用-g选项来安装它。你知道这里出了什么问题吗？[❤  ~/Desktop/sauce-node-demo:master] npm install -g vowsnpm http GET https://registry.npmjs.org/vowsnpm http 304 https://registry.npmjs.o

问在zsh中安装npm后找不到命令
EN

回答 23

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在zsh中安装npm后找不到命令EN

回答 23

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在zsh中安装npm后找不到命令
EN