在windows上使用c++向gmail帐户发送电子邮件错误检查

Question

我知道这已经讨论了很多，但我我不是在问怎么做，我只是问为什么它不起作用。我做错了什么。它说电子邮件已成功发送，但我在收件箱中没有看到它。我想发送电子邮件到gmail帐户，而不是通过它。

#include <iostream>
#include <windows.h>
#include <fstream>
#include <conio.h>
#pragma comment(lib, "ws2_32.lib")

// Insist on at least Winsock v1.1
const int VERSION_MAJOR = 1;
const int VERSION_MINOR = 1;

#define CRLF "\r\n"                 // carriage-return/line feed pair
using namespace std;

// Basic error checking for send() and recv() functions
void Check(int iStatus, char *szFunction)
{
  if((iStatus != SOCKET_ERROR) && (iStatus))
    return;

  cerr<< "Error during call to " << szFunction << ": " << iStatus << " - " << GetLastError() << endl;
}

int main(int argc, char *argv[])
{
  int         iProtocolPort        = 25;
  char        szSmtpServerName[64] = "";
  char        szToAddr[64]         = "";
  char        szFromAddr[64]       = "";
  char        szBuffer[4096]       = "";
  char        szLine[255]          = "";
  char        szMsgLine[255]       = "";
  SOCKET      hServer;
  WSADATA     WSData;
  LPHOSTENT   lpHostEntry;
  LPSERVENT   lpServEntry;
  SOCKADDR_IN SockAddr;

  // Check for four command-line args
  //if(argc != 5)
   // ShowUsage();

  // Load command-line args
  lstrcpy(szSmtpServerName, "smtp.gmail.com");
  lstrcpy(szToAddr, "xxxx@gmail.com");
  lstrcpy(szFromAddr, "xxx@gmail.com");

  // Create input stream for reading email message file
  ifstream MsgFile("D:\\d.txt");

  // Attempt to intialize WinSock (1.1 or later)
  if(WSAStartup(MAKEWORD(VERSION_MAJOR, VERSION_MINOR), &WSData))
  {
    cout << "Cannot find Winsock v" << VERSION_MAJOR << "." << VERSION_MINOR << " or later!" << endl;

    return 1;
  }

  // Lookup email server's IP address.
  lpHostEntry = gethostbyname(szSmtpServerName);
  if(!lpHostEntry)
  {
    cout << "Cannot find SMTP mail server " << szSmtpServerName << endl;

    return 1;
  }

  // Create a TCP/IP socket, no specific protocol
  hServer = socket(PF_INET, SOCK_STREAM, 0);
  if(hServer == INVALID_SOCKET)
  {
    cout << "Cannot open mail server socket" << endl;

    return 1;
  }

  // Get the mail service port
  lpServEntry = getservbyname("mail", 0);

  // Use the SMTP default port if no other port is specified
  if(!lpServEntry)
    iProtocolPort = htons(IPPORT_SMTP);
  else
    iProtocolPort = lpServEntry->s_port;

  // Setup a Socket Address structure
  SockAddr.sin_family = AF_INET;
  SockAddr.sin_port   = iProtocolPort;
  SockAddr.sin_addr   = *((LPIN_ADDR)*lpHostEntry->h_addr_list);

  // Connect the Socket
  if(connect(hServer, (PSOCKADDR) &SockAddr, sizeof(SockAddr)))
  {
    cout << "Error connecting to Server socket" << endl;

    return 1;
  }

  // Receive initial response from SMTP server
  Check(recv(hServer, szBuffer, sizeof(szBuffer), 0), "recv() Reply");

  // Send HELO server.com
  sprintf(szMsgLine, "HELO %s%s", szSmtpServerName, CRLF);
  Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() HELO");
  Check(recv(hServer, szBuffer, sizeof(szBuffer), 0), "recv() HELO");

  // Send MAIL FROM: <sender@mydomain.com>
  sprintf(szMsgLine, "MAIL FROM:<%s>%s", szFromAddr, CRLF);
  Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() MAIL FROM");
  Check(recv(hServer, szBuffer, sizeof(szBuffer), 0), "recv() MAIL FROM");

  // Send RCPT TO: <receiver@domain.com>
  sprintf(szMsgLine, "RCPT TO:<%s>%s", szToAddr, CRLF);
  Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() RCPT TO");
  Check(recv(hServer, szBuffer, sizeof(szBuffer), 0), "recv() RCPT TO");

  // Send DATA
  sprintf(szMsgLine, "DATA%s", CRLF);
  Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() DATA");
  Check(recv(hServer, szBuffer, sizeof(szBuffer), 0), "recv() DATA");
  //strat writing about the subject, end it with two CRLF chars and after that you can 
  //write data to the body oif the message
  sprintf(szMsgLine, "Subject: My own subject %s%s", CRLF, CRLF);
  Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() DATA");




  // Send all lines of message body (using supplied text file)
  MsgFile.getline(szLine, sizeof(szLine));             // Get first line

  do         // for each line of message text...
  {
    sprintf(szMsgLine, "%s%s", szLine, CRLF);
    Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() message-line");
    MsgFile.getline(szLine, sizeof(szLine)); // get next line.
  } while(!MsgFile.eof());

  // Send blank line and a period
  sprintf(szMsgLine, "%s.%s", CRLF, CRLF);
  Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() end-message");
  Check(recv(hServer, szBuffer, sizeof(szBuffer), 0), "recv() end-message");

  // Send QUIT
  sprintf(szMsgLine, "QUIT%s", CRLF);
  Check(send(hServer, szMsgLine, strlen(szMsgLine), 0), "send() QUIT");
  Check(recv(hServer, szBuffer, sizeof(szBuffer), 0), "recv() QUIT");

  // Report message has been sent
  cout<< "Sent " << argv[4] << " as email message to " << szToAddr << endl;

  // Close server socket and prepare to exit.
  closesocket(hServer);

  WSACleanup();
  _getch();
  return 0;
}

Answer 1

Google Mail SMTP服务器将不接受任何未经身份验证的邮件。如果发送者不是GMail用户，你可能会成功，你可以让会话看起来像是从另一个邮件服务器转发到GMail用户的邮箱，但是一旦你的发送者是@gmail.com，这个选项就不可用。

您必须执行身份验证，即启用SSL或TLS的会话(端口465、587)，然后进行密码身份验证。这样，邮件服务器将接受您的投递。您可以使用SChannel API为您执行TLS/SSL。

现在，当您有了这个代码片段时，您需要查看发送给您的响应。我相信您有一些东西可以解释身份验证是强制性的。