blocks|key|962735|text|如果工具链是基于gcc和调试器gdb的，那么很可能是这样的。只需使用eclipse和CDT，设置交叉编译项目，输入工具链前缀(如arm-eabi-或其他)，等等……当使用create+"gdb+hardware+debugging“启动配置进行编译时，输入要使用的正确的gdb命令(可能是-gdb)，就可以了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|962736|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If toolchain is gcc based and debugger gdb based, then probably yes. 
Just use eclipse with CDT, set up cross compile project, enter toolchain prefix (like arm-eabi- or something) etc... 
When compiled use create "gdb hardware debugging" launch configuration, enter proper gdb command to use (probably something-gdb) and you will probably be fine.

blocks|key|5081307|text|这里有一个关于为ARM设置Eclipse%2BGNU工具链的相当全面的指南：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5081308|http://www.stf12.org/developers/ODeV.html|offset|length|5081309|它给出了三巨头(Mac/Win/Lin)的一个很好的设置，并且很容易理解。但是，在将OpenOCD集成到Eclipse时需要一些直觉。|5081310|entityMap|0|LINK|mutability|MUTABLE|url^0|0|0|15|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@$D|Q|E|R|1|S]]|A|$]]|$1|F|3|G|5|6|7|T|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|U|8|@]|9|@]|A|$]]]|I|$J|$5|K|L|M|A|$N|C]]]]

There is a fairly comprehensive guide to setting up an Eclipse+GNU toolchain for ARM here:

<a href="http://www.stf12.org/developers/ODeV.html" rel="nofollow">http://www.stf12.org/developers/ODeV.html</a>

It gives a good run-down of the setup for the big three (Mac/Win/Lin), and is pretty easy to follow. Some intuition is required when integrating OpenOCD into Eclipse, however.

blocks|key|3468158|text|我相信你要找的是：http://www.yagarto.de/|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3468159|entityMap|0|LINK|mutability|MUTABLE|url|http://www.yagarto.de/^0|9|M|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

I believe what you are looking for is: <a href="http://www.yagarto.de/" rel="nofollow">http://www.yagarto.de/</a>

blocks|key|3468192|text|根据"Programming+the+Stellaris+Launchpad+with+GNU/Linux"的说法，您可以使用lm4tools作为目标，使用summon-arm-toolchain来获取编译器，甚至可以使用Stellarisware。github上也有jsnyder's+gcc+project。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3468193|我也在寻找合适的工具链，但不会接触Eclipse或任何混乱的安装程序。对于该路径，您可能希望查看CodeSourcery。Eclipse附带试用版。我现在不是在找Kinetis还有适用于mswin和OSX的Yagarto。|3468194|有一些talk+about+interfacing+to+the+Stellaris+debugger。lmicdiusb,+"TCP/USB+bridge+created+by+T"I应该允许GDB与Stellaris+Launchpad+ICDI通信。我还不确定这与特定的电路板或芯片有多大的联系。|3468195|更新:我发现Emdebian+toolchains在大脑皮层(拇指)目标上工作得很好。Stellarisware和CMSIS基本上是开箱即用的(设置了正确的编译器名称)。这些都是集成的(对于Debian来说)，因此是获得工具链的最干净的方式。我相信在Ubuntu上，main中也有相同的arm编译器。|3468196|更新：Debian+now+has+a+"bare+metal"+compiler+in+the+main+distribution。它是working+well+for+me，应该与其他工具有最好的集成。|3468197|entityMap|0|LINK|mutability|MUTABLE|url|http://recursive-labs.com/blog/2012/10/28/stellaris-launchpad-gnu-linux-getting-started/|1|https://github.com/utzig/lm4tools|2|https://github.com/esden/summon-arm-toolchain|3|http://www.ti.com/tool/sw-ek-lm4f120xl|4|https://github.com/jsnyder/arm-eabi-toolchain|5|http://processors.wiki.ti.com/index.php/Installing_CodeSourcery_Toolchain|6|http://www.yagarto.de/|7|http://forum.stellarisiti.com/topic/309-icdi-support-in-openocd/|8|9|http://wiki.debian.org/EmdebianToolchain|10|http://packages.debian.org/jessie/gcc-arm-none-eabi|11|http://xtl.kapsi.fi/stellaris.html^0|2|1G|0|1R|8|1|26|K|2|33|D|3|3Q|L|4|0|1C|C|5|2V|7|6|0|3|1C|7|1G|15|8|0|6|J|9|0|3|1R|A|1X|J|B|0^^$0|@$1|2|3|4|5|6|7|1E|8|@]|9|@$A|1F|B|1G|1|1H]|$A|1I|B|1J|1|1K]|$A|1L|B|1M|1|1N]|$A|1O|B|1P|1|1Q]|$A|1R|B|1S|1|1T]]|C|$]]|$1|D|3|E|5|6|7|1U|8|@]|9|@$A|1V|B|1W|1|1X]|$A|1Y|B|1Z|1|20]]|C|$]]|$1|F|3|G|5|6|7|21|8|@]|9|@$A|22|B|23|1|24]|$A|25|B|26|1|27]]|C|$]]|$1|H|3|I|5|6|7|28|8|@]|9|@$A|29|B|2A|1|2B]]|C|$]]|$1|J|3|K|5|6|7|2C|8|@]|9|@$A|2D|B|2E|1|2F]|$A|2G|B|2H|1|2I]]|C|$]]|$1|L|3|-4|5|6|7|2J|8|@]|9|@]|C|$]]]|M|$N|$5|O|P|Q|C|$R|S]]|T|$5|O|P|Q|C|$R|U]]|V|$5|O|P|Q|C|$R|W]]|X|$5|O|P|Q|C|$R|Y]]|Z|$5|O|P|Q|C|$R|10]]|11|$5|O|P|Q|C|$R|12]]|13|$5|O|P|Q|C|$R|14]]|15|$5|O|P|Q|C|$R|16]]|17|$5|O|P|Q|C|$R|U]]|18|$5|O|P|Q|C|$R|19]]|1A|$5|O|P|Q|C|$R|1B]]|1C|$5|O|P|Q|C|$R|1D]]]]

According to <a href="http://recursive-labs.com/blog/2012/10/28/stellaris-launchpad-gnu-linux-getting-started/" rel="nofollow">"Programming the Stellaris Launchpad with GNU/Linux"</a>, you can use <a href="https://github.com/utzig/lm4tools" rel="nofollow">lm4tools</a>
 for the target, <a href="https://github.com/esden/summon-arm-toolchain" rel="nofollow">summon-arm-toolchain</a> to get the compiler and even use <a href="http://www.ti.com/tool/sw-ek-lm4f120xl" rel="nofollow">Stellarisware</a>. There's also <a href="https://github.com/jsnyder/arm-eabi-toolchain" rel="nofollow">jsnyder's gcc project</a> on github.

I'm in the process of finding a suitable toolchain as well, but will not touch Eclipse or any messy installers. For that path, you may want to look at <a href="http://processors.wiki.ti.com/index.php/Installing_CodeSourcery_Toolchain" rel="nofollow">CodeSourcery</a>. Eclipse comes with the trial cersion. I'm not looking for Kinetis at the moment myself. There's also <a href="http://www.yagarto.de/" rel="nofollow">Yagarto</a> for mswin and OSX.

There is some <a href="http://forum.stellarisiti.com/topic/309-icdi-support-in-openocd/" rel="nofollow">talk about interfacing to the Stellaris debugger</a>. The <a href="https://github.com/utzig/lm4tools" rel="nofollow">lmicdiusb, "TCP/USB bridge created by T"I</a> should let GDB communicate with the Stellaris Launchpad ICDI. I'm not yet sure how tied that is to the particular board or chip.

Update: I've found that the <a href="http://wiki.debian.org/EmdebianToolchain" rel="nofollow">Emdebian toolchains</a> work perfectly well for Cortex (Thumb) targets. Stellarisware and CMSIS build essentially out of the box (with the right compiler name set). These are integrated and (for Debian) thus the cleanest way to get the toolchain. I believe on Ubuntu, you have the same arm compilers in main.

Update: <a href="http://packages.debian.org/jessie/gcc-arm-none-eabi" rel="nofollow">Debian now has a "bare metal" compiler in the main distribution</a>. It is <a href="http://xtl.kapsi.fi/stellaris.html" rel="nofollow">working well for me</a> and should have the neatest integration into other tools.

is there a way how to setup Eclipse + gnu gcc + debuger for ARM Cortex M3/M4 based micros (Stellaris, Kinetis)?

Best regards,
Peter

Toolchain ARM Cortex M4

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

EdgeOne AI 安全实战专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

有没有办法为基于ARM Cortex M3/M4的micros (Stellaris，Kinetis)设置Eclipse + gnu gcc +调试器？致以最好的问候，彼得

问工具链ARM Cortex M4
EN

回答 4

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问工具链ARM Cortex M4EN

回答 4

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问工具链ARM Cortex M4
EN