ioctl errorno: 25在使用python-gpib的GPIB通信中

Question

我正在尝试使用National Instruments的GPIB-USB-HS适配器与Tektronix示波器TDS 210通信。我的系统是Ubuntu14.04.3，我在其中安装了linux-gpib，链接如下：Linux GPIB Driver package (source)和python-gpib。我像这样重新配置了/etc/gpib.conf：

interface {
    minor = 0   /* board index, minor = 0 uses /dev/gpib0, minor = 1 uses /dev/gpib1, etc. */
    board_type = "ni_usb_b" /* type of interface board being used */
    name = "tds"    /* optional name, allows you to get a board descriptor using ibfind() */
    pad = 0 /* primary address of interface             */
    sad = 0 /* secondary address of interface           */
    master = yes    /* interface board is system controller */
    timeout = TNONE /* timeout for commands */
}
device {
       minor = 0
       name = "ATTN"
       pad = 0
       sad = 0
}

lsmod给了我这个：

$ lsmod | grep gpib
ni_usb_gpib            36515  1 
gpib_common            38274  3 ni_usb_gpib

dmesg：

$ dmesg | grep gpib
[ 2173.992039] ni_usb_gpib driver loadingni_usb_gpib: probe succeeded for path: usb-0000:00:1a.0-1.2
[ 2173.992098] usbcore: registered new interface driver ni_usb_gpib
[ 2173.992102] gpib: registered ni_usb_b interface
[ 2173.995077] ni_usb_gpib: attach

但是，当尝试使用ibtest与示波器通信时，我收到以下错误：

gpib status is: 
ibsta = 0x8100  < ERR CMPL >
iberr= 0
EDVR 0: OS error
ibcnt = 25

使用Python：

import Gpib
tds = Gpib.Gpib(0,0)
tds.write("*IDN?")
---------------------------------------------------------------------------
GpibError                                 Traceback (most recent call last)
<ipython-input-4-e61e6a76ac49> in <module>()
      1 import Gpib
      2 inst = Gpib.Gpib(0,0)
----> 3 inst.write("*IDN?")

/usr/local/lib/python2.7/dist-packages/Gpib.pyc in write(self, str)
     47 
     48         def write(self,str):
---> 49                 gpib.write(self.id, str)
     50 
     51         def write_async(self,str):

GpibError: write() error: Inappropriate ioctl for device (errno: 25)

是否有人已经有了类似的问题，或者知道如何解决这个问题？

Answer 1

我在ibtest和python中遇到了与您完全相同的错误。我在试着让gpib在圆周率上工作。我遵循了教程https://xdevs.com/guide/ni_gpib_rpi/

我通过更改我的/etc/gpib.conf (注意eos)修复了它：

interface {
minor = 0  
board_type = "ni_usb_b"
name = "violet"
pad = 0 
sad = 0 
timeout = T30s  
eos = 0xd       /* EOS Byte, was 0xa and I got same errors as you */
set-reos = yes   
set-bin = no    
set-xeos = no   
set-eot = yes   
master = yes    
}

现在一切都正常了！

$ sudo gpib_config
$ sudo ibtest
Do you wish to open a (d)evice or an interface (b)oard?
    (you probably want to open a device): d
enter primary gpib address for device you wish to open [0-30]: 3
trying to open pad = 3 on /dev/gpib0 ...
You can:
    w(a)it for an event
    ...
    (w)rite data string
: w
enter a string to send to your device: *idn?
sending string: *idn?

gpib status is:
ibsta = 0x2100  < END CMPL >
iberr= 0

ibcnt = 6
You can:
    w(a)it for an event
    ...      
    (r)ead string

: r
enter maximum number of bytes to read [1024]:
trying to read 1024 bytes from device...
received string: 'AEROFLEX,3920,1000662592,3.7.0,2'
Number of bytes read: 32
gpib status is:
ibsta = 0x2100  < END CMPL >
iberr= 0

ibcnt = 32

在Python中，除非我在实例化后调用clear，否则我会得到错误，然后就可以运行了：

? sudo python
Python 2.7.9 (default, Mar  8 2015, 00:52:26)
[GCC 4.9.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import Gpib
>>> inst = Gpib.Gpib(0,3)
>>> inst.clear()
>>> inst.write("*idn?")
>>> inst.read(100)
'AEROFLEX,3920,1000662592,3.7.0,2'

如果你仍然不能与乐器对话，试试字符串ID？而不是*IDN？一些hp设备有一个备用的命令语法，它使用不同的命令字符串，请查看手册(可能在后面顺便提到)，你通常可以用一个命令来回切换语法。祝好运。