blocks|key|3587000|text|在完全定义VimClojure映射之前，插件中最有可能出现错误。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3587001|当Clojure源文件在加载到Vim+buffer中时出现语法错误时，我可能会遇到一种可能的情况。|3587002|在加载源文件的过程中，插件中发生了一些错误(语法突出显示等)，导致错误并阻止了映射的定义。|3587003|这可能只是VimClojure的一个不幸的问题，应该报告，但我还没有时间深入挖掘并记录智能错误报告/补丁。|3587004|要进行故障排除，请在当前缓冲区中打开Clojure源文件，尝试执行以下操作：|3587005|:call+vimclojure#Repl.New()|code-block|syntax|javascript|3587006|这将调用映射到\sr的插件内的函数。这不是一种推荐的启动Repl的方式，但由于我们只是对你的配置进行故障排除，希望它能揭示出一些对你有意义的东西。|3587007|此外，执行此操作以查看是否有任何有用的消息被记录下来。|3587008|:messages|3587009|entityMap^0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|Y|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|Z|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|10|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|11|8|@]|9|@]|A|$M|N]]|$1|O|3|P|5|6|7|12|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|13|8|@]|9|@]|A|$]]|$1|S|3|T|5|L|7|14|8|@]|9|@]|A|$M|N]]|$1|U|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|V|$]]

Most likely there is an error occurring in the plugin before the VimClojure mappings are fully defined. 

One likely scenario that I have run into several times occurs when the Clojure source file has syntax errors when it's loaded into the Vim buffer. 

There's something going on in the plugin during the load of the source file (syntax highlighting or something) that errors out and prevents the mappings from getting defined. 

This is probably just an unfortunate issue with VimClojure and should be reported, but I haven't had time to dig enough and log an intelligent bug report/patch.

To troubleshoot, with a Clojure source file open in current buffer, try doing this:

<pre><code>:call vimclojure#Repl.New()
</code></pre>

This invokes the function inside the plugin that is mapped to \sr. It's not a recommended way of launching the Repl, but since we're just troubleshooting your configuration, hopefully it will reveal something meaningful to you. 

Also, do this to see if there happen to be any helpful messages getting logged.

<pre><code>:messages
</code></pre>

blocks|key|2413904|text|<LocalLeader>使用maplocalleader变量中的值，或者默认情况下是反斜杠。如果您没有设置maplocalleader变量，请尝试\sr|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2413905|entityMap^0|0|D|F|E|1I|E|22|3|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|G|$]]

<code>&lt;LocalLeader&gt;</code> uses value from <code>maplocalleader</code> variable or it is backslash by default. If you do not set <code>maplocalleader</code> variable try <code>\sr</code>

blocks|key|496976|text|我发现在vim-fireplace中学习Clojure插件要容易得多。可以在"Unboxing+vim-fireplace"中找到很好的介绍。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|496977|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/tpope/vim-fireplace|1|http://www.boxuk.com/blog/unboxing-vim-fireplace/^0|4|D|0|12|O|1|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]|$A|R|B|S|1|T]]|C|$]]|$1|D|3|-4|5|6|7|U|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]|L|$5|G|H|I|C|$J|M]]]]

I've found <a href="https://github.com/tpope/vim-fireplace" rel="nofollow">vim-fireplace</a> plugin a much easier way to start learning Clojure in Vim. Good introduction can be found in <a href="http://www.boxuk.com/blog/unboxing-vim-fireplace/" rel="nofollow">"Unboxing vim-fireplace"</a>.

blocks|key|5698918|text|我的.vimrc中没有sr的映射，但它适用于我。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5698919|你有没有检查过你的钉枪服务器正在运行，并且你已经打开了Gorilla？|5698920|例如，|5698921|let+clj_want_gorilla+=+1
let+vimclojure#NailgunClient+=+"/Users/foo/vimclojure-2.1.0/ng"|code-block|syntax|javascript|5698922|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|O|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|P|8|@]|9|@]|A|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I don't have a mapping for sr in my .vimrc, but it works for me.

Have you checked that your Nailgun server is running, and that you have turned on Gorilla?

E.g.,

<pre><code>let clj_want_gorilla = 1
let vimclojure#NailgunClient = "/Users/foo/vimclojure-2.1.0/ng"
</code></pre>

blocks|key|3587076|text|可以使用Conque，这是一个支持在vim缓冲区中运行外壳的vim插件。我已经成功地使用它在vim中运行了一个clojure+REPL。它支持拆分屏幕，因此可以将代码从clojure源代码缓冲区发送到clojure+REPL。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3587077|entityMap|0|LINK|mutability|MUTABLE|url|http://code.google.com/p/conque/^0|4|6|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

One can use <a href="http://code.google.com/p/conque/" rel="nofollow noreferrer">Conque</a>, a vim plugin that supports running a shell in a vim buffer. I have successfully used it to run a clojure REPL inside vim. It supports split screens, so one can send code from a clojure source code buffer to the clojure REPL.

blocks|key|3587049|text|我发现，如果找不到NailgunClient，VimClojure将静默失败，并且所有命令都不起作用。我基本上只是重复上面的Joe+Holloway，但是尝试这个来验证是否真的找到了Nailgun客户端：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3587050|:call+vimclojure#Repl.New()|code-block|syntax|javascript|3587051|在我的例子中，我忘记了构建客户端，所以我只是返回到解压缩的VimClojure文件夹并运行make。这将创建ng，即钉枪客户端可执行文件。确保它在您的PATH中的某个位置，或设置|offset|length|style|CODE|3587052|let+vimclojure#NailgunClient+=+"/Users/foo/vimclojure-2.1.0/ng"|3587053|如上所述。|3587054|entityMap^0|0|0|19|4|1I|2|23|4|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@$I|V|J|W|K|L]|$I|X|J|Y|K|L]|$I|Z|J|10|K|L]]|9|@]|A|$]]|$1|M|3|N|5|D|7|11|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|12|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|R|$]]

I've found that if the NailgunClient cannot be found, VimClojure will fail silently and none of the &lt;LocalLeader&gt; commands will work. I'm basically just repeating Joe Holloway above, but try this to verify that the Nailgun client is actually found:

<pre><code>:call vimclojure#Repl.New()
</code></pre>

In my case I forgot to build the client, so I just returned to the unzipped VimClojure folder and ran <code>make</code>. This creates <code>ng</code>, the nailgun client executable. Make sure this is in your <code>PATH</code> somewhere, or set

<pre><code>let vimclojure#NailgunClient = "/Users/foo/vimclojure-2.1.0/ng"
</code></pre>

as mentioned above.

blocks|key|2407875|text|你不需要按一下吗，老大？我认为默认情况下LocalLeader是一个逗号。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2407876|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Don't you need to press ,sr? LocalLeader is a comma by default I think.

blocks|key|2407901|text|你有没有试过把它映射到其他东西上？看起来您不确定LocalLeader映射到了什么，所以我建议更改您的映射。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2407902|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Have you tried mapping it to something else? It seems like you aren't sure what LocalLeader is mapped to, so I would recommend changing your mapping.

blocks|key|5698956|text|我用:set+nocompatible解决了E10问题。然后，\sr等命令可以正常工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5698957|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I solved the E10 problem with :set nocompatible. Then the \sr etc. commands worked OK.

blocks|key|3587091|text|使用Nailgun+server+is+how+I've+done+it获取VimClojure设置。我使用leiningen来帮助管理类路径。这是一个相当复杂的过程，但一旦设置好就很好了。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3587092|entityMap|0|LINK|mutability|MUTABLE|url|http://naleid.com/blog/2011/12/19/getting-a-clojure-repl-in-vim-with-vimclojure-nailgun-and-leiningen/^0|2|Y|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

Getting VimClojure setup with a <a href="http://naleid.com/blog/2011/12/19/getting-a-clojure-repl-in-vim-with-vimclojure-nailgun-and-leiningen/" rel="nofollow">Nailgun server is how I've done it</a>. I use leiningen to help manage the classpath. It's a fairly complicated process, but nice once you've got it set up.

blocks|key|501896|text|除了使用正确的本地领导密钥(即，"\“默认情况下为->+\sr+)，请注意，为了让VimClojure启动repl，需要在缓冲区中加载clojure文件。如果你只是启动VimClojure并点击\sr，什么都不会发生，因为vim还没有激活。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|501897|您可以通过编辑扩展名为clj的文件来激活VimClojure。来自vim内部：:e+test.clj|501898|现在，当你点击\sr时，repl应该会打开。如果没有，请参阅有关检查隐藏错误消息的另一个答案。|501899|本教程在撰写本文时是最新的，它帮助我在OSX：https://github.com/daveray/vimclojure-easy中使用Leiningen设置了VimClojure。|501900|链接到“下一步是什么”部分的更高级设置也很有帮助。|501901|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/daveray/vimclojure-easy^0|S|3|2P|3|0|13|B|0|7|3|0|N|16|0|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@$9|W|A|X|B|C]|$9|Y|A|Z|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|10|8|@$9|11|A|12|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|13|8|@$9|14|A|15|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|16|8|@]|D|@$9|17|A|18|1|19]]|E|$]]|$1|L|3|M|5|6|7|1A|8|@]|D|@]|E|$]]|$1|N|3|-4|5|6|7|1B|8|@]|D|@]|E|$]]]|O|$P|$5|Q|R|S|E|$T|U]]]]

In addition to using the correct local leader key (ie. "\" -> <code>\sr</code> by default), note that in order for VimClojure to start a repl, a clojure file needs to be loaded in the buffer. If you just start vim and hit <code>\sr</code> nothing will happen because VimClojure is not active yet. 

You can activate VimClojure by editing a file with the clj extension. From inside vim:
<code>
:e test.clj
</code>

Now when you hit <code>\sr</code> the repl should open. If not, see the other answer regarding checking hidden error messages.

This tutorial is up-to-date as of time of writing and helped me get VimClojure set up with Leiningen in OSX: <a href="https://github.com/daveray/vimclojure-easy" rel="nofollow">https://github.com/daveray/vimclojure-easy</a>

The more advanced setup linked to in the What's Next section was also helpful.

I have installed vimclojure to make it easier to start learning clojure. But, I haven't been able to setup REPL inside vim. This is essentially because I was not able to write a maplocalleader in vim(?)

Based on the documentation in vimclojure/doc/clojure.txt I put the following in my .vimrc to start the REPL -

<pre><code>:map &lt;LocalLeader&gt;sr *sr* *StartRepl*
</code></pre>

But typing "sr" doesn't start the REPL.

Thanks in advance.

How do I setup REPL on vim?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云AI代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

功能1上新10个字符

功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符。

功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符。

功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符

功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符

功能4上新

文章&问答评论现已支持表情

全新交互，全新视觉，新增快捷键、悬浮工具栏、高亮块等功能并同时优化现有功能，全面提升创作效率和体验

社区富文本编辑器全新改版！诚邀体验～ 

精选全网热门MCP server，让你的AI更好用 🚀

💥开发者 MCP广场重磅上线！

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

我安装了vimclojure，以便更容易地开始学习clojure。但是，我还无法在vim中设置REPL。这本质上是因为我不能用vim(?)基于vimclojure/doc/clojure.txt中的文档，我在我的.vimrc中添加了以下内容来启动REPL -:map <LocalLeader>sr *sr* *StartRepl*但是输入"sr“并不会启动REPL。提前谢谢。

问如何在vim上设置REPL？
EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在vim上设置REPL？EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在vim上设置REPL？
EN