blocks|key|2856606|text|(另请参阅iPhone+to+RS-232+via+Bluetooth)|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2856607|存在支持MFi+(为iPhone设计)的蓝牙模块，例如connectBlue+http://www.connectblue.com/products/bluetooth-products/bluetooth-modules/bluetooth-iphone-ios-accessory-module-obs414/的这个模块，因此标准的iPhone蓝牙堆栈可以建立到该设备的SPP/RFCOMM连接。该设备可以与RS232电平转换等一起添加到电路板上。也因此成功。|2856608|我不知道有没有人卖这样的设备。connectBlue销售的RS232设备似乎不支持MFi、http://www.connectblue.com/products/bluetooth-products/bluetooth-devices/bluetooth-rugged-serial-port-adapter-rbs433/|2856609|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/7420717/iphone-to-rs-232-via-bluetooth|1|http://www.connectblue.com/products/bluetooth-products/bluetooth-modules/bluetooth-iphone-ios-accessory-module-obs414/|2|http://www.connectblue.com/products/bluetooth-products/bluetooth-devices/bluetooth-rugged-serial-port-adapter-rbs433/^0|5|U|0|0|13|3A|1|0|19|39|2|0^^$0|@$1|2|3|4|5|6|7|T|8|@]|9|@$A|U|B|V|1|W]]|C|$]]|$1|D|3|E|5|6|7|X|8|@]|9|@$A|Y|B|Z|1|10]]|C|$]]|$1|F|3|G|5|6|7|11|8|@]|9|@$A|12|B|13|1|14]]|C|$]]|$1|H|3|-4|5|6|7|15|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]|P|$5|K|L|M|C|$N|Q]]|R|$5|K|L|M|C|$N|S]]]]

(See also <a href="https://stackoverflow.com/questions/7420717/iphone-to-rs-232-via-bluetooth">iPhone to RS-232 via Bluetooth</a>)

Bluetooth modules exists that support MFi (Made For iPhone) such as this one from connectBlue <a href="http://www.connectblue.com/products/bluetooth-products/bluetooth-modules/bluetooth-iphone-ios-accessory-module-obs414/" rel="nofollow noreferrer">http://www.connectblue.com/products/bluetooth-products/bluetooth-modules/bluetooth-iphone-ios-accessory-module-obs414/</a> So the standard iPhone Bluetooth stack can make a SPP/RFCOMM connection to that device. That device could be added to a board along with RS232 level-conversion etc... And thus success.

I don't know whether someone sells such a device. The RS232 device that connectBlue sells seems not to support MFi, <a href="http://www.connectblue.com/products/bluetooth-products/bluetooth-devices/bluetooth-rugged-serial-port-adapter-rbs433/" rel="nofollow noreferrer">http://www.connectblue.com/products/bluetooth-products/bluetooth-devices/bluetooth-rugged-serial-port-adapter-rbs433/</a>

blocks|key|4969254|text|不怎么有意思。GameKit是在iOS中访问蓝牙一种方法，但是它所允许的功能非常有限。根据你正在构建的是什么，你也许能够使用苹果为iPod制造的程序，但这可能是一个很小的机会。http://developer.apple.com/programs/mfi/|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4969255|entityMap|0|LINK|mutability|MUTABLE|url|http://developer.apple.com/programs/mfi/^0|2G|14|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

Not really. The GameKit is one way to access bluetooth in iOS, but it is very limited in what that API allows you to do. 
Depending on what you are building, you might be able to use the Apple Made for iPod program, but it's probably a long shot. 
<a href="http://developer.apple.com/programs/mfi/" rel="nofollow">http://developer.apple.com/programs/mfi/</a>

blocks|key|139013|text|最好的方法可能是设计一个通过WiFi连接的设备。我已经走了这条路，而且效果很好。如果您必须与具有RS-232接口的设备连接，则可以设计一个中间“适配器”，它通过WiFi连接到iOS设备，并通过RS-232连接到另一个设备。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|139014|如果你不需要通过app+Store分发你的应用程序，你可以使用Redpark的iOS串行电缆：http://redpark.com/c2db9.html。(免责声明，我从来没有尝试过，但据Redpark的一个人说，越狱不是必须的，你只是不能在应用商店上分发你的应用程序。)|offset|length|139015|entityMap|0|LINK|mutability|MUTABLE|url|http://redpark.com/c2db9.html^0|0|1B|T|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@$D|P|E|Q|1|R]]|A|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|M]]]]

The best way to go is probably to design a device that connects via WiFi. I've gone this route, and it worked out well. If you must interface with something with an RS-232 interface, you might design an intermediary "adapter" that connects via WiFi to the iOS device, and via RS-232 to the other device.

If you don't have a need to distribute your app via the App Store, you can use Redpark's iOS serial cable: <a href="http://redpark.com/c2db9.html" rel="nofollow">http://redpark.com/c2db9.html</a>. (Disclaimer, I've never tried one, but according to someone at Redpark, jailbreaking is not required, you just can't distribute your app on the app store.)

blocks|key|2050529|text|你可以设计一个小的加密狗，通过基座连接器连接，并通过蓝牙向你的其他设备广播。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2050530|或者你可以使用WiFi代替蓝牙。也许是通过WiFi与你想要控制的任何东西进行物理连接。|2050531|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

You could design a small dongle that attaches via the dock connector, and broadcasts over bluetooth to your other device.

Or you could use WiFi instead of bluetooth... perhaps communicating over WiFi to something that's physically plugged into whatever you want to control.

blocks|key|2043601|text|我开发了一个越狱应用程序，它使用BTStack与串行设备通信。你也许可以在你的演示中使用它。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2043602|entityMap|0|LINK|mutability|MUTABLE|url|http://code.google.com/p/btstack/^0|G|7|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

I worked on a jailbroken app which used <a href="http://code.google.com/p/btstack/" rel="nofollow">BTStack</a> to communicate with a serial device. You might be able to use this for your demo.

blocks|key|2043634|text|如果你还想使用蓝牙，这对我很有帮助，可以帮助你在不越狱的情况下实现标准的串行连接：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2043635|http://www.seeedstudio.com/depot/bleshield-based-on-bluegigas-ble112-module-p-1367.html|offset|length|2043636|它适用于支持蓝牙4.0的iOS设备，所有原理图、板卡文件、固件源和iOS应用程序源均可在此处获得：|2043637|https://github.com/michaelkroll/BLE-Shield|2043638|entityMap|0|LINK|mutability|MUTABLE|url|1^0|0|0|2F|0|0|0|0|16|1|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@$D|T|E|U|1|V]]|A|$]]|$1|F|3|G|5|6|7|W|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|X|8|@]|9|@$D|Y|E|Z|1|10]]|A|$]]|$1|J|3|-4|5|6|7|11|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|C]]|Q|$5|M|N|O|A|$P|I]]]]

If you're still looking to use bluetooth, this helped me out alot to facilitate the standard serial connection for prototyping without jailbreaking:

<a href="http://www.seeedstudio.com/depot/bleshield-based-on-bluegigas-ble112-module-p-1367.html" rel="nofollow">http://www.seeedstudio.com/depot/bleshield-based-on-bluegigas-ble112-module-p-1367.html</a>

It works on the Bluetooth 4.0 enabled iOS devices and all of the schematic, boardfiles, firmware sources and the iOS App sources are available here:

<a href="https://github.com/michaelkroll/BLE-Shield" rel="nofollow">https://github.com/michaelkroll/BLE-Shield</a>

Is it possible to pair an iDevice to an rs232-bluetooth adapter for the purpose of sending serial commands like it would through an iDevice dock connector to rs232 (just like the Redpark Serial Cable does)? I ask because the company I work for is thinking of having an iDevice control one of our systems for demo. I know it doesn't relate to anything specific but any information would be greatly appreciated.

RS232 for iOS device

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云AI代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

功能1上新10个字符

功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符。

功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符。

功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符

功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符

功能4上新

文章&问答评论现已支持表情

全新交互，全新视觉，新增快捷键、悬浮工具栏、高亮块等功能并同时优化现有功能，全面提升创作效率和体验

社区富文本编辑器全新改版！诚邀体验～ 

精选全网热门MCP server，让你的AI更好用 🚀

💥开发者 MCP广场重磅上线！

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

是否可以将iDevice与rs232-bluetooth适配器配对，以便发送串行命令，就像通过iDevice坞站连接器发送rs232一样(就像Redpark串行电缆一样)？我问这个问题是因为我工作的公司正在考虑让一个iDevice控制我们的一个系统进行演示。我知道它不涉及任何具体的东西，但任何信息都会非常感谢。

问iOS设备的RS232
EN

回答 6

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问iOS设备的RS232EN

回答 6

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问iOS设备的RS232
EN