blocks|key|2739365|text|我也遇到过类似的问题。我不知道为什么，很快我就失去了耐心，所以我忽略了这个错误，直接点击“运行”。错误实际上消失了，并显示"Build+Succeeded“！|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2739366|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I met similar problem, too. I couldn't figure out why and soon I lost patience so just ignored the error and clicked "run" directly. The error actually disappeared and "Build Succeeded" was shown!

blocks|key|4852143|text|您还可以尝试其他一些方法：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4852144|验证xcodebuild版本|4852145|确保您的xcodebuild版本也设置为6.4。|offset|length|style|CODE|4852146|​|4852147|📷|atomic|4852148|4852149|全部清理|4852150|您肯定想在项目中尝试使用clean+all。有时，这会重置问题。|4852151|擦除DerivedData和Xcode缓存|4852152|另一件可能导致这个问题的事情是，你可能需要擦除你的DerivedData文件夹和Xcode缓存。|4852153|echo+"Removing+DerivedData+and+Xcode+Cache"
rm+-rf+~/Library/Developer/Xcode/DerivedData
rm+-rf+~/Library/Caches/com.apple.dt.Xcode|code-block|syntax|javascript|4852154|试一试，我会相应地更新我的答案。祝你好运！|4852155|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/f66eb33b75e33a0def0c295954dfc93f.png|imageAlt^0|0|0|4|A|K|3|0|0|0|1|0|0|0|0|C|9|0|0|P|B|0|0|0^^$0|@$1|2|3|4|5|6|7|1D|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1E|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|1F|8|@$F|1G|G|1H|H|I]|$F|1I|G|1J|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|1K|8|@]|9|@]|A|$]]|$1|L|3|M|5|N|7|1L|8|@]|9|@$F|1M|G|1N|1|1O]]|A|$]]|$1|O|3|K|5|6|7|1P|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|1Q|8|@]|9|@]|A|$]]|$1|R|3|S|5|6|7|1R|8|@$F|1S|G|1T|H|I]]|9|@]|A|$]]|$1|T|3|U|5|6|7|1U|8|@]|9|@]|A|$]]|$1|V|3|W|5|6|7|1V|8|@$F|1W|G|1X|H|I]]|9|@]|A|$]]|$1|X|3|Y|5|Z|7|1Y|8|@]|9|@]|A|$10|11]]|$1|12|3|13|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|14|3|-4|5|6|7|20|8|@]|9|@]|A|$]]]|15|$16|$5|17|18|19|A|$1A|1B|1C|-4]]]]

There are a few other things you can try:

<h2>Verify xcodebuild version</h2>

Make sure your <code>xcodebuild</code> version also set to <code>6.4</code>.

<a href="https://i.stack.imgur.com/HKZC5.png" rel="noreferrer"><img src="https://i.stack.imgur.com/HKZC5.png" alt="xcodebuild settings"></a>

<h2>Clean All</h2>

You certainly want to try <code>clean all</code> in the project. Sometimes that will reset the issue.

<h2>Wipe DerivedData and Xcode Cache</h2>

Another thing that could be causing the problem is that you may need to wipe your <code>DerivedData</code> folder along with your Xcode cache.

<pre><code>echo "Removing DerivedData and Xcode Cache"
rm -rf ~/Library/Developer/Xcode/DerivedData
rm -rf ~/Library/Caches/com.apple.dt.Xcode
</code></pre>

Give those a whirl and I'll update my answer accordingly. Best of luck!

blocks|key|4852237|text|我遇到了同样的问题，并通过Product->clean+then+Product->build修复了它|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4852238|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I met the same question and by
Product->clean then Product->build fixed it

blocks|key|4852259|text|我的修复方法是将我的Podfile中的平台版本更改为我在Xcode中为其构建的相同版本。然后再次运行pod+install。德尔普。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4852260|示例：platform+:ios,+'11.2'|4852261|entityMap^0|A|7|1E|B|0|3|L|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|R|8|@]|D|@]|E|$]]]|I|$]]

The fix for me was changing the platform version in my <code>Podfile</code> to the same version I was building for in Xcode. Then run <code>pod install</code> again. Derp.

Example: <code>platform :ios, '11.2'</code>

blocks|key|1985161|text|这个问题已经在Github上报告过了：https://github.com/Alamofire/Alamofire/issues/441|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1985162|请按照以下步骤操作|1985163|1985164|产品->清理|ordered-list-item|1985165|重启Xcode|1985166|重建项目|1985167|可能已允许访问密钥链|1985168|<代码>G210|1985169|好运和快乐的编码|1985170|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/Alamofire/Alamofire/issues/441^0|J|1D|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|11|8|@]|9|@$A|12|B|13|1|14]]|C|$]]|$1|D|3|E|5|6|7|15|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|16|8|@]|9|@]|C|$]]|$1|G|3|H|5|I|7|17|8|@]|9|@]|C|$]]|$1|J|3|K|5|I|7|18|8|@]|9|@]|C|$]]|$1|L|3|M|5|I|7|19|8|@]|9|@]|C|$]]|$1|N|3|O|5|I|7|1A|8|@]|9|@]|C|$]]|$1|P|3|Q|5|6|7|1B|8|@]|9|@]|C|$]]|$1|R|3|S|5|6|7|1C|8|@]|9|@]|C|$]]|$1|T|3|-4|5|6|7|1D|8|@]|9|@]|C|$]]]|U|$V|$5|W|X|Y|C|$Z|10]]]]

This issue was already reported on Github: <a href="https://github.com/Alamofire/Alamofire/issues/441" rel="nofollow">https://github.com/Alamofire/Alamofire/issues/441</a>

Follow the following steps

<ol>
<li>Product -> Clean </li>
<li>Restart Xcode</li>
<li>Rebuild the project</li>
<li>Might have allowed permission to access the keychain</li>
</ol>

Good Luck and Happy Coding

blocks|key|4852340|text|对我来说，上面的答案都不管用。在构建设置中，我在其他Swift+Flags中设置了一个标志，这是我做得非常错误的事情。覆盖cocoapods自定义标志的。在这种情况下，它会显示如下所示的错误。Pod安装完成！Podfile中有16个依赖项，总共安装了29个pods。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|4852341|[!]+The+`*****+[Debug]`+target+overrides+the+`OTHER_SWIFT_FLAGS`+build+setting+defined+in
++++`Pods/Target+Support+Files/Pods-MishiPay/Pods-MishiPay.debug.xcconfig'.+This+can+lead+
++++to+problems+with+the+CocoaPods+installation
++++-+Use+the+`$(inherited)`+flag,+or
++++-+Remove+the+build+settings+from+the+target.|code-block|syntax|javascript|4852342|而不是删除我的其他自定义标志。在此之后，我又添加了一个标志$(inherited)，一切工作正常。|CODE|4852343|​|4852344|📷|atomic|4852345|4852346|$(inherited)继承cocoapods定义的所有自定义标志|4852347|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/b7a46daf22d4f751271ec0851fe5c5fe.png|imageAlt^0|24|1|0|0|T|C|0|0|0|1|0|0|0|0|C|E|9|0^^$0|@$1|2|3|4|5|6|7|14|8|@$9|15|A|16|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|17|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|18|8|@$9|19|A|1A|B|M]]|D|@]|E|$]]|$1|N|3|O|5|6|7|1B|8|@]|D|@]|E|$]]|$1|P|3|Q|5|R|7|1C|8|@]|D|@$9|1D|A|1E|1|1F]]|E|$]]|$1|S|3|O|5|6|7|1G|8|@]|D|@]|E|$]]|$1|T|3|U|5|6|7|1H|8|@$9|1I|A|1J|B|M]|$9|1K|A|1L|B|M]]|D|@]|E|$]]|$1|V|3|-4|5|6|7|1M|8|@]|D|@]|E|$]]]|W|$X|$5|Y|Z|10|E|$11|12|13|-4]]]]

For me, none of the above answers worked.
Something I did terribly wrong was setting a flag in Other Swift Flags in the Build Settings. Which override cocoapods custom flags. 
It shows an error something like this in that case.
Pod installation complete! There are 16 dependencies from the Podfile and 29 total pods installed.

<pre><code>[!] The `***** [Debug]` target overrides the `OTHER_SWIFT_FLAGS` build setting defined in
 `Pods/Target Support Files/Pods-MishiPay/Pods-MishiPay.debug.xcconfig'. This can lead 
 to problems with the CocoaPods installation
 - Use the `$(inherited)` flag, or
 - Remove the build settings from the target.
</code></pre>

So Instead of removing my other custom flags. I added one more flag <code>$(inherited)</code> after this everything worked fine.

<a href="https://i.stack.imgur.com/DeE1r.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/DeE1r.png" alt="enter image description here"></a>

<code>$(inherited)</code> inherits all the custom flags defined by <code>cocoapods</code>

blocks|key|2739406|text|这是Alamofire的一个Xcode+bug。只要继续重建应用程序并清理它即可。在重启之后，Xcode和问题应该会消失。希望这能有所帮助，|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2739407|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

it's a Xcode bug with Alamofire. Just keep rebuilding the app and cleaning it. After that restart, Xcode and the problem should go away. 
Hope that helps,

blocks|key|78833|text|在我的例子中，我忘记了为所有目标添加依赖项。我只是在单元测试的时候遇到了这个问题，后来我意识到我错过了将它添加到测试目标的.pod文件中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|78834|目标'SujanTests‘do|78835|pod+'Alamofire'，'~>+3.7‘|78836|结束|78837|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

In my case, I forget to add dependency for all targets. I got the issue only while Unit testing, later I recognised that I missed to add it in .pod file for test target.

target 'SujanTests' do

pod 'Alamofire', '~> 3.7'

end

Here is the original github <a href="https://github.com/Alamofire/Alamofire/issues/441" rel="noreferrer">issue</a>, support sugested to open a thread here for more public support. 

I'm using xcode 6.4.

<pre><code>$ pod --version
0.38.2
</code></pre>

My Podfile:

<pre><code>platform :ios, '8.0'
use_frameworks!

target 'Turnt' do
 pod 'Starscream'
 pod 'Alamofire', '~&gt; 1.3'
end
</code></pre>

Cannot load underlying module for 'Alamofire'

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云AI代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

功能1上新10个字符

功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符功能2描述100个字符。

功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符功能2上新100个字符。

功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符功能5描述100个字符

功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符功能5上新100个字符

功能4上新

文章&问答评论现已支持表情

全新交互，全新视觉，新增快捷键、悬浮工具栏、高亮块等功能并同时优化现有功能，全面提升创作效率和体验

社区富文本编辑器全新改版！诚邀体验～ 

精选全网热门MCP server，让你的AI更好用 🚀

💥开发者 MCP广场重磅上线！

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

这里是最初的github ，支持建议在这里开通一个线程，以获得更多的公众支持。我使用的是xcode 6.4。$ pod --version0.38.2我的Podfile：platform :ios, '8.0'use_frameworks!target 'Turnt' do    pod 'Starscream'    pod 'Alamofire', '~> 1.3'end

问无法加载“Alamofire”的基础模块
EN

回答 8

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问无法加载“Alamofire”的基础模块EN

回答 8

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问无法加载“Alamofire”的基础模块
EN